SIST EN 3155-080:2019
(Main)Aerospace series - Electrical contacts used in elements of connection - Part 080: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class T - Product standard
Aerospace series - Electrical contacts used in elements of connection - Part 080: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class T - Product standard
This document specifies the required characteristics and tests applicable to male electrical contacts 080, type A, crimp, class T, used in elements of connection according to EN 3155 002.
It shall be used together with EN 3155 001.
The associated female contacts are defined in EN 3155 081.
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 080: Elektrische Stiftkontakte Größe 22 für EN 2997, Typ A, crimpbar, Klasse T - Produktnorm
Dieses Dokument legt die Anforderungen und Prüfungen für elektrische Stiftkontakte, Größe 080, Typ A, crimpbar, Klasse T zur Verwendung in Verbindungselementen nach EN 3155-002 fest.
Es ist in Verbindung mit EN 3155-001 anzuwenden.
Die zugehörigen Buchsenkontakte sind in EN 3155-081 festgelegt.
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 080 : Contacts électriques taille 22 pour EN 2997, mâles, type A, à sertir, classe T - Norme de produit
Le présent document spécifie les caractéristiques requises et les essais applicables aux contacts électriques mâles 080, de type A, à sertir, de classe T, utilisés dans les organes de connexion suivant l’EN 3155-002.
Elle doit être utilisée conjointement à l’EN 3155-001.
Les contacts femelles associés sont définis dans l’EN 3155-081.
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 080. del: Kontakti velikosti 22 za EN 2997, električni, moški, tip A, nagubani, razred T - Standard za proizvod
Ta dokument določa zahtevane značilnosti in preskuse za moške električne kontakte velikosti 080, tipa A, nagubane, razreda T, ki se uporabljajo v veznih elementih v skladu s standardom EN 3155 002.
Uporabljati ga je treba skupaj s standardom EN 3155 001.
Povezani ženski kontakti so določeni v standardu EN 3155 081.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 3155-080:2019
01-november-2019
Nadomešča:
SIST EN 3155-080:2015
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 080. del: Kontakti
velikosti 22 za EN 2997, električni, moški, tip A, nagubani, razred T - Standard za
proizvod
Aerospace series - Electrical contacts used in elements of connection - Part 080:
Contacts size 22 for EN 2997, electrical, male, type A, crimp, class T - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 080: Elektrische Stiftkontakte Größe 22 für EN 2997, Typ A, crimpbar, Klasse T -
Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
080 : Contacts électriques taille 22 pour EN 2997, mâles, type A, à sertir, classe T -
Norme de produit
Ta slovenski standard je istoveten z: EN 3155-080:2019
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3155-080:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3155-080:2019
---------------------- Page: 2 ----------------------
SIST EN 3155-080:2019
EN 3155-080
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3155-080:2014
English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 080: Contacts size 22 for EN 2997,
electrical, male, type A, crimp, class T - Product standard
Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 080 : Contacts Verwendung in Verbindungselementen - Teil 080:
électriques taille 22 pour EN 2997, mâles, type A, à Elektrische Stiftkontakte Größe 22 für EN 2997, Typ A,
sertir, classe T - Norme de produit crimpbar, Klasse T - Produktnorm
This European Standard was approved by CEN on 25 February 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-080:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3155-080:2019
EN 3155-080:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
5 Designation . 11
6 Marking . 11
7 Technical specification . 11
2
---------------------- Page: 4 ----------------------
SIST EN 3155-080:2019
EN 3155-080:2019 (E)
European foreword
This document (EN 3155-080:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2020, and conflicting national standards shall
be withdrawn at the latest by February 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3155-080:2014.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 3155-080:2019
EN 3155-080:2019 (E)
1 Scope
This document specifies the required characteristics and tests applicable to male electrical contacts 080,
type A, crimp, class T, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-081.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard
EN 2591 (all parts), Aerospace series — Elements of electrical and optical connection — Test methods
EN 2997 (all parts), Aerospace series — Connectors, electrical, circular, coupled by threaded ring,
fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous,
260 °C peak
EN 3155-001, Aerospace series — Electrical contacts used in elements of connection —
Part 001: Technical specification
EN 3155-002, Aerospace series — Electrical contacts used in elements of connection —
Part 002: List and utilization of contacts
EN 3155-081, Aerospace series — Electrical contacts used in elements of connection —
Part 081: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class T — Product standard
EN 4434, Aerospace series — Copper or copper alloy lightweight conductors for electrical cables —
Product standard (No
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.