oSIST prEN 15347-5:2024

Plastics - Sorted plastics wastes - Part 5: Quality grades of sorted poly(vinyl chloride) (PVC) wastes and specific test methods

This document describes the quality grades for sorted poly(vinyl chloride) (PVC) waste streams as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. PVC waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The scheme provides for a division of information between "Required Data", where a statement is required, and additional "Optional Data" as agreed between the supplying and receiving party.
This document does not cover the general characterization addressed in EN 15347-1.

Kunststoffe - Sortierte Kunststoffabfälle - Teil 5: Qualitätsstufen von sortierten Polyvinylchlorid(PVC)-Abfällen und spezifische Prüfverfahren

Dieses Dokument beschreibt die Güteklassen für sortierte Polyvinylchlorid(PVC)-Abfallströme sowie spezifische Prüfverfahren, nach denen jene Eigenschaften umrissen werden, zu denen die Partei, die den Abfall liefert, der Partei, die diesen entgegen nimmt, Informationen zugänglich macht. Güteklassen von PVC-Abfällen beruhen auf einer Anzahl zuvor bestimmter Eigenschaften unter Berücksichtigung von sektor- und marktspezifischen Gesichtspunkten sowie damit in Zusammenhang stehenden Informationsanforderungen und Prüfverfahren. Das Schema beinhaltet die Unterscheidung von Informationen in "geforderte Daten", deren Angabe erforderlich ist, und "optionale Daten", wie zwischen der liefernden Partei und der entgegennehmenden Partei vereinbart.
Dieses Dokument befasst sich nicht mit der allgemeinen Charakterisierung, die in EN 15347-1 behandelt wird.

Plastiques - Déchets de plastiques triés - Partie 5: Grades de qualité des déchets de poly(chlorure de vinyle) (PVC) triés et méthodes d’essai spécifiques

Le présent document décrit les grades de qualité pour les flux de déchets de poly(chlorure de vinyle) (PVC) triés, ainsi que des méthodes d’essai spécifiques, en présentant les propriétés pour lesquelles la partie émettrice de ces déchets met des informations à la disposition de la partie réceptrice. Les grades de qualité des déchets de PVC sont basés sur des ensembles de caractéristiques prédéterminés, tenant compte des spécificités du secteur et du marché et des besoins correspondants en termes d’informations et de méthodes d’essai. Le programme fait une distinction entre les « Données requises », pour lesquelles une déclaration est demandée, et les « Données optionnelles » supplémentaires qui sont fournies selon l’accord entre la partie émettrice et la partie réceptrice.
Le présent document ne couvre pas la caractérisation générale, qui est traitée dans l’EN 15347-1.

Polimerni materiali - Razvrščeni odpadki iz polimernih materialov - 5. del: Stopnje kakovosti razvrščenih poli(vinilkloridnih) (PVC) odpadkov in posebne preskusne metode

General Information

• Status: Not Published
• Public Enquiry End Date: 18-Jun-2024
• ICS: 13.030.50 - Recycling
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 11-Apr-2024
• Due Date: 29-Aug-2024
• Mandate: M/584 - Plastics recycling and recycled plastics
• Ref Project: prEN 15347-5 - Plastics - Sorted plastics wastes - Part 5: Quality grades of sorted poly(vinyl chloride) (PVC) wastes and specific test methods

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 15347-5:2024
01-junij-2024
Polimerni materiali - Razvrščeni odpadki iz polimernih materialov - 5. del: Stopnje
kakovosti razvrščenih poli(vinilkloridnih) (PVC) odpadkov in posebne preskusne
metode
Plastics - Sorted plastics wastes - Part 5: Quality grades of sorted poly(vinyl chloride)
(PVC) wastes and specific test methods
Kunststoffe - Sortierte Kunststoffabfälle - Teil 5: Qualitätsstufen von sortierten
Polyvinylchlorid(PVC)-Abfällen und spezifische Prüfverfahren
Plastiques - Déchets de plastiques triés - Partie 5: Grades de qualité des déchets de
poly(chlorure de vinyle) (PVC) triés et méthodes d’essai spécifiques
Ta slovenski standard je istoveten z: prEN 15347-5
ICS:
13.030.50 Recikliranje Recycling
83.080.20 Plastomeri Thermoplastic materials
oSIST prEN 15347-5:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15347-5:2024

---------------------- Page: 2 ----------------------
oSIST prEN 15347-5:2024


DRAFT
EUROPEAN STANDARD
prEN 15347-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2024
ICS 13.030.50; 83.080.20
English Version

Plastics - Sorted plastics wastes - Part 5: Quality grades of
sorted poly(vinyl chloride) (PVC) wastes and specific test
methods
 Kunststoffe - Güteklassen für sortierte
Kunststoffabfälle - Teil 5 Polyvinylchlorid (PVC)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15347-5:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15347-5:2024
prEN 15347-5:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviated terms . 5
4 Requirements . 5
4.1 General. 5
4.2 Classification scheme . 5
4.3 PVC Building and Construction – Rigid . 6
4.4 PVC Building and Construction – Flexible .
...