Plastics - Recycled plastics - Characterisation of poly(ethylene terephthalate) (PET) recyclates

This European Standard gives guidelines for the characterisation of poly(ethylene terephthalate) (PET) recyclates.
It gives the most important characteristics and associated test methods for assessing PET recyclates intended to be used for the production of semi-finished/finished products. It is intended for use by the supplier and purchaser of such materials, to assist them in agreeing on specifications.
This European Standard is applicable without prejudice to any existing legislation.

Kunststoffe - Kunststoff-Rezyklate - Charakterisierung von Polyethylenterephthalat (PET)-Rezyklaten

Diese Europäische Norm gibt Anleitungen zur Bestimmung der Eigenschaften von Polyethylenterephthalat¬(PET) Rezyklaten.
Die Europäische Norm nennt die wichtigsten Eigenschaften und führt die dazugehörigen Prüfverfahren für die Bewertung von PET Rezyklaten auf, die für die Produktion von Halbzeugen/Fertigprodukten vorgesehen sind. Sie ist für die Anwendung durch Lieferant und Käufer derartiger Materialien vorgesehen, um ihnen bei der Erzielung einer Einigung zu Spezifikationen Unterstützung zu geben.
Diese Europäische Norm beeinträchtigt bei ihrer Anwendung keinerlei geltende Vorschriften.

Plastiques - Plastiques recyclés - Caractérisation des recyclats de poly(éthylène téréphtalate) (PET)

La présente Norme Européenne donne des lignes directrices pour la caractérisation des recyclats de poly(éthylène téréphtalate) (PET).
Elle donne les caractéristiques les plus importantes et les méthodes d'essai associées pour évaluer les recyclats de PET destinés à être utilisés dans la production de produits semi-finis/finis. Elle est destinée à être utilisée par le fournisseur et le client de telles matières et les assister pour convenir de spécifications concernant des applications spécifiques et génériques.
La présente Norme européenne est applicable sans préjudice de toute réglementation existante.

Polimerni materiali - Reciklirani polimerni materiali - Karakterizacija reciklatov polietilen-tereftalata (PET)

Ta evropski standard navaja smernice za karakterizacijo reciklatov polietilen-tereftalata (PET).
Navaja najpomembnejše značilnosti in povezane preskusne metode za ocenjevanje reciklatov polietilen-tereftalata za uporabo pri proizvodnji polizdelkov/končnih izdelkov. Namenjen je kot podpora dobaviteljem in kupcem takih materialov pri dogovarjanju glede specifikacij.
Ta evropski standard ne posega v nobeno obstoječo zakonodajo.

General Information

Status
Withdrawn
Public Enquiry End Date
29-Sep-2014
Publication Date
26-Nov-2014
Withdrawal Date
19-May-2024
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-May-2024
Due Date
12-Jun-2024
Completion Date
20-May-2024

Relations

Buy Standard

Standard
EN 15348:2015
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 15348:2014
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Polimerni materiali - Reciklirani polimerni materiali - Karakterizacija reciklatov polietilen-tereftalata (PET)Kunststoffe - Kunststoff-Rezyklate - Charakterisierung von Polyethylenterephthalat (PET)-RezyklatenPlastiques - Plastiques recyclés - Caractérisation des recyclats de poly(éthylène téréphtalate) (PET)Plastics - Recycled plastics - Characterisation of poly(ethylene terephthalate) (PET) recyclates83.080.20PlastomeriThermoplastic materials13.030.50RecikliranjeRecyclingICS:Ta slovenski standard je istoveten z:EN 15348:2014SIST EN 15348:2015en,fr,de01-januar-2015SIST EN 15348:2015SLOVENSKI
STANDARDSIST EN 15348:20081DGRPHãþD



SIST EN 15348:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15348
November 2014 ICS 13.030.50; 83.080.20 Supersedes EN 15348:2007English Version
Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
Plastiques - Plastiques recyclés - Caractérisation des recyclats de poly(éthylène téréphtalate) (PET)
Kunststoffe - Kunststoff-Rezyklate - Charakterisierung von Polyethylenterephthalat (PET)-Rezyklaten This European Standard was approved by CEN on 20 September 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15348:2014 ESIST EN 15348:2015



EN 15348:2014 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Characterization of PET recyclates.6 5 Quality assurance .7 Annex A (normative)
Determination of size and distribution of PET-R flakes by sieving .8 Annex B (normative)
Gravimetric method for the determination of residual humidity (water content) . 11 Annex C (normative)
Rapid method for the determination of residual impurities . 13 Annex D (informative)
Potentiometric method for the determination of the residual alkalinity. 15 Annex E (informative)
Method for the determination of infusible impurities by filtration . 17 Bibliography . 19
SIST EN 15348:2015



EN 15348:2014 (E) 3 Foreword This document (EN 15348:2014) has been prepared by Technical Committee CEN/TC 249 “Plastics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2015 and
...

SLOVENSKI STANDARD
kSIST FprEN 15348:2014
01-september-2014
Polimerni materiali - Reciklirani polimerni materiali - Karakterizacija reciklatov
polietilen-tereftalata (PET)
Plastics - Recycled plastics - Characterisation of poly(ethylene terephthalate) (PET)
recyclates
Kunststoffe - Kunststoff-Rezyklate - Charakterisierung von Polyethylenterephthalat (PET)
-Rezyklaten
Plastiques - Plastiques recyclés - Caractérisation des recyclats de poly(éthylène
téréphtalate) (PET)
Ta slovenski standard je istoveten z: FprEN 15348
ICS:
13.030.50 Recikliranje Recycling
83.080.20 Plastomeri Thermoplastic materials
kSIST FprEN 15348:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST FprEN 15348:2014

---------------------- Page: 2 ----------------------
kSIST FprEN 15348:2014

EUROPEAN STANDARD
FINAL DRAFT
FprEN 15348
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2014
ICS 13.030.50; 83.080.20 Will supersede EN 15348:2007
English Version
Plastics - Recycled plastics - Characterisation of poly(ethylene
terephthalate) (PET) recyclates
Plastiques - Plastiques recyclés - Caractérisation des Kunststoffe - Kunststoff-Rezyklate - Charakterisierung von
recyclats de poly(éthylène téréphtalate) (PET) Polyethylenterephthalat (PET)-Rezyklaten
This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC
249.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 15348:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST FprEN 15348:2014
FprEN 15348:2014 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Characterization of PET recyclates.6
5 Quality assurance .7
Annex A (normative) Determination of size and distribution of PET-R flakes by sieving .8
Annex B (normative) Gravimetric method for the determination of residual humidity (water
content) . 11
Annex C (normative) Rapid method for the determination of residual impurities . 13
Annex D (informative) Potentiometric method for the determination of the residual alkalinity. 15
An
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.