SIST EN 3638:2009

Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm ≤ a ≤ 10 mm

This standard specifies the requirements relating to:
Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15)
Consumable electrode remelted
Solution and precipitation treated
Sheet, strip and plate
0,5 mm ≤ a ≤ 10 mm
for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Legierung FE-PA2601 (X6NiCrTiMoV26-15) - Mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgelagert - Bleche, Bänder und Platten - 0,5 mm ≤ a ≤ 10 mm

Diese Norm legt die Anforderungen an
Hochwarmfeste Legierung FE PA2601 (X6NiCrTiMoV26-15)
mit selbstverzehrender Elektrode umgeschmolzen
Lösungsgeglüht und ausgehärtet
Bleche, Bänder und Platten
0,5 mm ≤ a ≤ 10 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Luft- und Raumfahrt - Hochwarmfeste Legierung FE-PA2601 (X6NiCrTiMoV26-15) - Mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgelagert - Bleche, Bänder und Platten - 0,5 mm ≤ a ≤ 10 mm

Aeronavtika - Zlitina FE-PA2601 (X6NiCrTiMoV26-15), odporna proti vročini - Pretaljena s talilno elektrodo - Žarjena v topilu in utrjena - Pločevina, trakovi in plošča - 0,5 mm ≤ a ≤ 10 mm

General Information

• Status: Published
• Publication Date: 07-Apr-2009
• ICS: 49.025.10 - Steels
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 03-Apr-2009
• Due Date: 08-Jun-2009
• Completion Date: 08-Apr-2009
• Ref Project: EN 3638:2007 - Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm ≤ a ≤ 10 mm

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 3638:2007SIST EN 3638:2009en,de01-maj-2009SIST EN 3638:2009SLOVENSKI
STANDARD



SIST EN 3638:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3638
March 2007 ICS 49.025.10 English Version
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm ≤ a ≤ 10 mm
Série aérospatiale - Alliage résistant à chaud FE-PA2601 (X6NiCrTiMoV26-15) - Élaboré par électrode consommable - Mis en solution et précipité - Tôles, bandes et plaques - 0,5 mm ≤ a ≤ 10 mm
Luft- und Raumfahrt - Hochwarmfeste Legierung FE-PA2601 (X6NiCrTiMoV26-15) - Mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgelagert - Bleche, Bänder und Platten - 0,5 mm ≤ a ≤10 mm This European Standard was approved by CEN on 5 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3638:2007: ESIST EN 3638:2009



EN 3638:2007 (E) 2 Foreword This document (EN 3638:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 3638:2009



EN 3638:2007 (E) 3 Introduction This
...