SIST EN 1870-7:2002/kprA1:2009
(Amendment)Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 7: Einblatt-Stammkreissägemaschinen mit mechanischem Tischvorschub und Handbeschickung und/oder Handentnahme
Sécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 7: Scies circulaires monolames à grumes à avance intégrée à table et à chargement manuel et/ou déchargement manuel
Varnost lesnoobdelovalnih strojev - Krožne žage - 7. del: Enolistne žage za razrez hlodov z vgrajeno podajalno mizo in ročnim podajanjem in/ali odvzemom
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1870-7:2002/kprA1:2009
01-maj-2009
9DUQRVWOHVQRREGHORYDOQLKVWURMHY.URåQHåDJHGHO (QROLVWQHåDJH]DUD]UH]
KORGRY]YJUDMHQRSRGDMDOQRPL]RLQURþQLPSRGDMDQMHPLQDOLRGY]HPRP
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log
sawing machines with integrated feed table and manual loading and/or unloading
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 7: Einblatt-
Stammkreissägemaschinen mit mechanischem Tischvorschub und Handbeschickung
und/oder Handentnahme
Sécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 7:
Scies circulaires monolames à grumes à avance intégrée à table et à chargement
manuel et/ou déchargement manuel
Ta slovenski standard je istoveten z: EN 1870-7:2002/prA1
ICS:
25.080.60 Strojne žage Sawing machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN 1870-7:2002/kprA1:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1870-7:2002/kprA1:2009
---------------------- Page: 2 ----------------------
SIST EN 1870-7:2002/kprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 1870-7:2002
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2009
ICS 79.120.10
English Version
Safety of woodworking machines - Circular sawing machines -
Part 7: Single blade log sawing machines with integrated feed
table and manual loading and/or unloading
Sécurité des machines pour le travail du bois - Machines à Sicherheit von Holzbearbeitungsmaschinen -
scier circulaires - Partie 7: Scies circulaires monolames à Kreissägemaschinen - Teil 7: Einblatt-
grumes à avance intégrée à table et à chargement manuel Stammkreissägemaschinen mit mechanischem
et/ou déchargement manuel Tischvorschub und Handbeschickung und/oder
Handentnahme
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 142.
This draft amendment A1, if approved, will modify the European Standard EN 1870-7:2002. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1870-7:2002/prA1:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 1870-7:2002/kprA1:2009
EN 1870-7:2002/prA1:2009 (E)
Contents Page
Foreword .3
1 Modification to the Foreword .4
2 Modification to Clause 1, Scope .4
3 Modification to Clause 2, Normative references .4
4 Modification to 3.2, Definitions .6
5 Modification to Clause 4, List of hazards .6
6 Modification to Clause 5, Safety requirements and/or measures (hanging paragraph) .8
7 Modification to 5.1.1, Safety and reliability of control systems .8
8 Modification to 5.1.3, Starting .8
9 Modification to 5.1.4, Normal stopping .9
10 Modification to 5.1.5, Emergency stop .9
11 Modification to 5.1.7, Failure of the power supply .9
12 Modification to 5.2.1, Stability .9
13 Modification to 5.2.2, Risk of break-up during operation .9
14 Modification to 5.2.5.1, Riving knife .9
15 Modification to 5.3.1, Fire and explosion . 10
16 Modification to 5.3.4, Electricity . 10
17 Modification to 5.3.5, Ergonomics and handling . 10
18 Modification to 5.3.6, Lighting . 11
19 Modification to 5.3.7, Pneumatic . 11
20 Modification to 5.3.8, Hydraulic . 11
21 Modification to 5.3.12, Radiation . 11
22 Modification to 5.3.13, Laser . 11
23 Modification to 5.3.16, Isolation . 12
24 Modification to 5.3.17, Maintenance . 12
25 Modification to Clause 6, Information for use . 12
26 Modification to 6.2.2, Marking of the machine . 12
27 Modification to 6.3, Instruction handbook . 13
28 Modification to Annex E . 15
29 Modification to Annex ZA, Relationship between this European Standard and the
Essential Requirements of EU Directive 98/37/EC . 16
30 Addition of Annex ZB, Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC . 16
31 Modification to Bibliography . 17
2
---------------------- Page: 4 ----------------------
SIST EN 1870-7:2002/kprA1:2009
EN 1870-7:2002/prA1:2009 (E)
Foreword
This document (EN 1870-7:2002/prA1:2009) has been prepared by Technical Committee CEN/TC 142
“Woodworking machines - Safety”, the secretariat of which is held by UNI.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of the Machinery Directive.
For relationship with EU Directive, see informative Annexes ZA and ZB, which are integral parts of this
document.
3
---------------------- Page: 5 ----------------------
SIST EN 1870-7:2002/kprA1:2009
EN 1870-7:2002/prA1:2009 (E)
1 Modification to the Foreword
Replace the fourth paragraph with the following:
"For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.".
th
In the 6 paragraph, replace "annexes E and ZA" with "Annexes ZA and ZB".
2 Modification to Clause 1, Scope
Replace first paragraph with: "This document deals with the significant hazards, hazardous situations and
events as listed in Clause 4 which are relevant to single blade circular log sawing machines with integrated
feed table with manual loading and/or unloading, (hereinafter referred to as machines), designed to cut solid
wood."
Delete third paragraph.
3 Modification to Clause 2, Normative references
Replace the standard paragraph with the following: "The following referenced documents are indispensable
for the application of this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.".
Delete reference EN 292-1:1991 in Clause 2 and replace "EN 292-1:1991" with "EN ISO 12100-1:2003"
throughout the document.
Delete references EN 292-2:1991 and EN 292-2/A1:1995.
Delete reference to "EN 954-1:1996" and replace it with "EN ISO 13849-1:2008, Safety of machinery —
Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1:2006)". Replace
"EN 954-1:1996" with "EN ISO 13849-1:2008" and "EN 954-1" with "EN ISO 13849-1" throughout the text.
Replace "EN 1070:1998" with "EN ISO 12100-1:2003" throughout the document.
Replace "EN 60204-1:1992" with "EN 60204-1:2006" and replace in the title
"(IEC 60204-1:1992, modified)" with "(IEC 60204-1:2005, modified)".
Replace reference to "EN 60825-1"with "EN 60825-1:2007, Safety of laser products — Part 1: Equipment
classification and requirements (IEC 60825-1:2007)".
Replace the title of "EN 60947-4-1" with "Low-voltage switchgear and controlgear — Part 4-1: Contactors and
motor-starters — Electromechanical contactors and motor-starters (IEC 60947-4-1:2000)".
Replace reference to "EN 60947-5-1:1997" with "EN 60947-5-1:2004, Low voltage switchgear and control
gear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices
(IEC 60947-5-1:2003)" and replace "EN 60947-5-1:1997" with "EN 60947-5-1:2004" throughout the document.
Replace the title of EN ISO 3743-1 with "Acoustics — Determination of sound power levels of noise sources
—- Engineering methods for small, movable sources in reverberant fields — Part 1: Comparison method for
hard-walled test rooms (ISO 3743-1:1994)".
4
---------------------- Page: 6 ----------------------
SIST EN 1870-7:2002/kprA1:2009
EN 1870-7:2002/prA1:2009 (E)
Replace the title of EN ISO 3743-2 with "Acoustics — Determination of sound power levels of noise sources
using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2:
Methods for special reverberation test rooms (ISO 3743-2:1994)".
Replace the title of EN ISO 11202 with "Acoustics — Noise emitted by machinery and equipment —-
Measurement of emission sound pressure levels at a work station and at other specified positions — Survey
method in situ (ISO 11202:1995)".
Delete reference to "ISO 3745" and replace it with "EN ISO 3745, Acoustics — Determination of sound power
levels of noise sources using sound pressure — Precision methods for anechoic and semi-anechoic rooms
(ISO 3745:2003)" and replace "ISO 3745" with "EN ISO 3745" throughout the document.
Replace reference to "HD 21.1 S3" with "HD 21.1 S4, Cables of rated voltages up to and including 450/750 V
and having thermoplastic insulation — Part 1: General requirements" and replace "HD 21.1 S3" with "HD 21.1
S4" throughout the document.
Replace reference to "HD 22.1 S3" with "HD 22.1 S4, Cables of rated voltages up to and including 450/750 V
and having cross-linked insulation — Part 1: General requirements" and replace "HD 22.1 S3" with "HD 22.1
S4" throughout the document.
Replace reference to "HD 22.4 S3:1995+A1:1999" with "HD 22.4 S4:2004, Cables of rated voltages up to and
including 450/750 V and having crosslinked insulation — Part 4: Cords and flexible cables" and replace "HD
22.4 S3:1995+A1:1999" with "HD 22.4 S4:2004" throughout the document.
Add the following references:
"EN 614-1:2006, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general
principles",
"EN 894-1:1997, Safety of machinery — Ergonomics requirements for the design of displays and control
actuators — Part 1: General principles for human interactions with displays and control actuators
EN 894-2:1997, Safety of machinery — Ergonomics requirements for the design of displays and control
actuators — Part 2: Displays
EN 894-3:2000, Safety of machinery — Ergonomics requirements for the design of displays and control
actuators — Part 3: Control actuators",
"EN 1005-1:2001, Safety of machinery — Human physical performance — Part 1: Terms and definitions
EN 1005-2:2003, Safety of machinery — Human physical performance — Part 2: Manual handling of
machinery and component parts of machinery
EN 1005-3:2002, Safety of machinery — Human physical performance — Part 3: Recommended force limits
for machinery operation
EN 1005-4:2005, Safety of machinery — Human physical performance — Part 4: Evaluation of working
postures and movements in relation to machinery
EN 1037:1995, Safety of machinery — Prevention of unexpected start-up",
"EN 50370-1:2005, Electromagnetic compatibility (EMC) — Product family standard for machine-tools —
Part 1: Emission
EN 50370-2:2003, Electromagnetic compatibility (EMC) — Product family standard for machine-tools —
Part 2: Immunity",
"EN 60439-1:1999, Low-voltage switchgear and controlgear assemblies — Part 1: Type-tested and partially
type-tested assemblies (IEC 60439-1:1999)",
5
---------------------- Page: 7 ----------------------
SIST EN 1870-7:2002/kprA1:2009
EN 1870-7:2002/prA1:2009 (E)
"EN 61310-1:2008, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for
visual, acoustic and tactile signals (IEC 61310-1:2007)" and
"EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic
terminology, methodology (ISO 12100-1:2003)
EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2:
Technical principles (ISO 12100-2:2003)".
4 Modification to 3.2, Definitions
Definition 3.2.3, replace the term with "displaceable machine".
Definition 3.2.19, replace the term with "information from the supplier".
5 Modification to Clause 4, List of hazards
Replace the title of Clause 4 with: "List of significant hazards"
Replace the clause content with:
"This clause contains the significant hazards, hazardous situations and events (see EN 1050:1996) as far as
they are dealt with in this document, identified by risk assessment as significant for the machines as defined in
the scope and which require action to eliminate or reduce the risk. This document deals with these significant
hazards by defining safety requirements and/or measures or by reference to relevant standards.
These hazards are listed in Table 1 in accordance with Annex A of EN 1050:1996.
Table 1 — List of significant hazards
Hazards, hazardous situations and Relevant sub-
No hazardous events EN ISO 12100 clause of this
document
Part 1: Part 2:
2003 2003
1 Mechanical hazards related to:
- machine parts or workpieces:
a) shape; 4.2 4.2.1, 5.2.2, 5.2.3,
4.2.2, 5 5.2.5, 5.2.6,
5.2.7, 5.2.8
b) relative location; 5.2.2, 5.2.3,
5.2.5
c) mass and stability (potential energy of 5.1.2, 5.2.8
elements which may move under the
effect of gravity)
d) mass and velocity (kinetic energy of 5.1.3, 5.2.1,
elements in controlled or uncontrolled 5.2.5
motion);
e) mechanical strength. 5.2.3, 5.2.5
6
---------------------- Page: 8 ----------------------
SIST EN 1870-7:2002/kprA1:2009
EN 1870-7:2002/prA1:2009 (E)
- accumulation of energy inside the machinery:
g) liquids and gases under pressure; 4.2 4.10, 5.5.4 5.3.7, 5.3.8
1.1 Crushing hazard 4.2.1 5.2.7, 5.2.8
1.2 Shearing hazard 5.2.7, 5.2.8
1.3 Cutting or severing hazard 5.2.2, 5.2.3,
5.2.4, 5.2.7
1.4 Entanglement hazard 5.2.3, 5.2.6,
5.2.7
1.5 Drawing-in or trapping hazard 5.2.7
1.6 Impact hazard 5.2.7, 5.2.8
1.9 High pressure fluid injection or ejection 5.3.7, 5.3.8
hazard
2 Electrical hazards due to:
2.1 Contact of persons with live parts (direct 4.3 4.9, 5.5.4 5.3.4, 5.3.16
contact)
2.2 Contact of persons with parts which have 4.3 4.9 5.3.4, 5.3.16
become live under faulty conditions
(indirect contact)
2.4 Electrostatic phenomena 4.3 4.9 5.3.14
4 Hazards generated by noise, resulting in:
Hearing loss (deafness), other 4.5 4.2.2, 5 5.3.2
4.1
physiological disorders (loss of balance,
loss of awareness)
Interference with speech communication, 5.3.2
4.2
acoustic signals.
Hazards generated by radiation
6
6.5 Lasers 4.7 5.3.13
7 Hazards generated by materials and substances (and their constituent elements)
processed or used by the machinery
7.1 Hazards from contact with or inhalation of 4.8 4.3b, 4.4 5.3.3
harmful fluids and dusts
7.2 Fire hazard 4.8 4.4 5.3.1, 6.3
8 Hazards generated by neglecting ergonomic principles in machinery design
related to:
8.1 Unhealthy postures or excessive effort 4.9 4.7, 4.8.2, 5.1.2
4.11.12,
5.5.5, 5.5.6
8.2 Hand-arm or foot-leg anatomy 4.9 4.8.3 5.1.2
8.4 Local lighting 4.8.6 6.3
8.6 Human error, human behaviour 4.8, 4.11.8, 6.3
4.11.10,
5.5.2, 6
8.7 Des
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.