SIST ES 203 811-3 V1.1.1:2023

Integrated broadband cable telecommunication networks (CABLE) - Sixth generation transmission systems for interactive cable television services - IP cable modem - Part 3: MAC and upper layer protocol interfaces - DOCSIS® 4.0 [ANSI/SCTE 262-2 2020]

The present document provides the ETSI endorsement of ANSI/SCTE standard ANSI/SCTE 262-2 [1].
ANSI/SCTE 262-2 [1] is part of a series of standards that defines the sixth generation of high-speed data-over-cable
systems and is based on a set of specifications commonly referred to as DOCSIS 4.0 specifications. This generation of
the DOCSIS specifications builds upon the previous generations of DOCSIS specifications (commonly referred to as
the DOCSIS 3.1 and earlier specifications), leveraging the existing Media Access Control (MAC) and Physical (PHY)
layers with the addition of appropriate updates to the MAC and management layers to support new PHY functionality.
It includes backward compatibility for the existing PHY layers in order to enable a seamless migration to the new
technology.
ANSI/SCTE 262-2 [1] defines the interface for the MAC and upper layer protocols, and corresponds to the CableLabs
specification CM-SP-MULPIv4.0-I01-190815 [i.1].

Integrirana širokopasovna kabelska telekomunikacijska omrežja (CABLE) - Šesta generacija prenosnih sistemov za storitve interaktivne kabelske televizije - IP-kabelski modemi - 3. del: MAC in vmesnik protokola zgornje plasti - DOCSIS® 4.0 [ANSI/SCTE 262-2 2020]

Iz tega dokumenta je razvidno, da ETSI podpira standard ANSI/SCTE ANSI/SCTE 262-2 [1]. ANSI/SCTE 262-2 [1] je del skupine standardov, ki opredeljuje šesto generacijo sistemov hitrega prenosa podatkov prek kabelskega omrežja in temelji na nizu specifikacij, ki se običajno imenujejo specifikacije DOCSIS 4.0. Ta generacija specifikacij DOCSIS temelji na prejšnjih generacijah specifikacij DOCSIS (običajno imenovanih DOCSIS 3.1 in starejših), pri čemer izkorišča obstoječi nadzor dostopa do medijev (MAC) in fizične plasti (PHY) z dodatkom ustreznih posodobitev MAC in plasti upravljanja za podporo nove funkcionalnosti PHY. Vključuje povratno združljivost za obstoječe plasti PHY, kar omogoča enostaven prehod na novo tehnologijo. ANSI/SCTE 262-2 [1] določa vmesnik za protokole MAC in zgornji sloj ter ustreza specifikaciji CableLabs CM-SP-MULPIv4.0-I01-190815 [i.1].

General Information

• Status: Published
• Publication Date: 17-Jan-2023
• ICS: 33.060.40 - Cabled distribution systems
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 17-Jan-2023
• Due Date: 24-Mar-2023
• Completion Date: 18-Jan-2023
• Ref Project: ETSI ES 203 811-3 V1.1.1 (2022-09) - Integrated broadband cable telecommunication networks (CABLE); Sixth generation transmission systems for interactive cable television services - IP cable modem; Part 3: MAC and upper layer protocol interfaces; DOCSIS® 4.0 [ANSI/SCTE 262-2 2020]

Standards Content (Sample)

ETSI ES 203 811-3 V1.1.1 (2022-09)






ETSI STANDARD
Integrated broadband cable
telecommunication networks (CABLE);
Sixth generation transmission systems for interactive cable
television services - IP cable modem;
®
Part 3: MAC and upper layer protocol interfaces; DOCSIS 4.0
[ANSI/SCTE 262-2 2020]

---------------------- Page: 1 ----------------------
[ANSI/SCTE 262-2 2020] 2 ETSI ES 203 811-3 V1.1.1 (2022-09)

Reference
DES/CABLE-0029-3
Keywords
access, broadband, CABLE, DOCSIS,
endorsement, IP, IPCable

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2022.
All rights reserved.

ETSI

---------------------- Page: 2 ----------------------
[ANSI/SCTE 262-2 2020] 3 ETSI ES 203 811-3 V1.1.1 (2022-09)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definition of terms, symbols and abbreviations . 6
3.1 Terms . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
Endorsement notice . 6
History . 7


ETSI

---------------------- Page: 3 ----------------------
[ANSI/SCTE 262-2 2020] 4 ETSI ES 203 811-3 V1.1.1 (2022-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may hav
...

Final draft ETSI ES 203 811-3 V1.1.1 (2022-07)






ETSI STANDARD
Integrated broadband cable
telecommunication networks (CABLE);
Sixth generation transmission systems for interactive cable
television services - IP cable modem;
®
Part 3: MAC and upper layer protocol interfaces; DOCSIS 4.0
[ANSI/SCTE 262-2 2020]

---------------------- Page: 1 ----------------------
[ANSI/SCTE 262-2 2020] 2 Final draft ETSI ES 203 811-3 V1.1.1 (2022-07)

Reference
DES/CABLE-0029-3
Keywords
access, broadband, CABLE, DOCSIS,
endorsement, IP, IPCable

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
and/or governmental
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2022.
All rights reserved.

ETSI

---------------------- Page: 2 ----------------------
[ANSI/SCTE 262-2 2020] 3 Final draft ETSI ES 203 811-3 V1.1.1 (2022-07)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definition of terms, symbols and abbreviations . 6
3.1 Terms . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
Endorsement notice . 6
History . 7


ETSI

---------------------- Page: 3 ----------------------
[ANSI/SCTE 262-2 2020] 4 Final draft ETSI ES 203 811-3 V1.1.1 (2022-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to
...

SLOVENSKI STANDARD
SIST ES 203 811-3 V1.1.1:2023
01-marec-2023
Integrirana širokopasovna kabelska telekomunikacijska omrežja (CABLE) - Šesta
generacija prenosnih sistemov za storitve interaktivne kabelske televizije - IP-
kabelski modemi - 3. del: MAC in vmesnik protokola zgornje plasti - DOCSIS® 4.0
[ANSI/SCTE 262-2 2020]
Integrated broadband cable telecommunication networks (CABLE) - Sixth generation
transmission systems for interactive cable television services - IP cable modem - Part 3:
MAC and upper layer protocol interfaces - DOCSIS® 4.0 [ANSI/SCTE 262-2 2020]
Ta slovenski standard je istoveten z: ETSI ES 203 811-3 V1.1.1 (2022-09)
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
SIST ES 203 811-3 V1.1.1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ES 203 811-3 V1.1.1:2023

---------------------- Page: 2 ----------------------
SIST ES 203 811-3 V1.1.1:2023
ETSI ES 203 811-3 V1.1.1 (2022-09)






ETSI STANDARD
Integrated broadband cable
telecommunication networks (CABLE);
Sixth generation transmission systems for interactive cable
television services - IP cable modem;
®
Part 3: MAC and upper layer protocol interfaces; DOCSIS 4.0
[ANSI/SCTE 262-2 2020]

---------------------- Page: 3 ----------------------
SIST ES 203 811-3 V1.1.1:2023

[ANSI/SCTE 262-2 2020] 2 ETSI ES 203 811-3 V1.1.1 (2022-09)

Reference
DES/CABLE-0029-3
Keywords
access, broadband, CABLE, DOCSIS,
endorsement, IP, IPCable

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2022.
All rights reserved.

ETSI

---------------------- Page: 4 ----------------------
SIST ES 203 811-3 V1.1.1:2023

[ANSI/SCTE 262-2 2020] 3 ETSI ES 203 811-3 V1.1.1 (2022-09)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definition of terms, symbols and abbreviations . 6
3.1 Terms . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
Endorsement notice .
...