Integrated broadband cable telecommunication networks (CABLE) - Fourth generation transmission systems for interactive cable television services - IP cable modems - Part 2: Physical layer - DOCSIS® 3.1 [ANSI/SCTE 220-1 2016]

The present document provides the ETSI endorsement of ANSI/SCTE Standard 220-1 [1].
ANSI/SCTE Standard 220-1 is part of a series of specifications that defines the fourth generation of high-speed dataover-
cable systems, commonly referred to as the DOCSIS 3.1 specifications. The standard was developed for the
benefit of the cable industry, and includes contributions by operators and vendors from North and South America,
Europe and Asia.
This generation of the DOCSIS specifications builds upon the previous generations of DOCSIS specifications
(commonly referred to as the DOCSIS 3.0 and earlier specifications), leveraging the existing Media Access Control
(MAC) and Physical (PHY) layers, but with the addition of a new PHY layer designed to improve spectral efficiency
and provide better scaling for larger bandwidths (and appropriate updates to the MAC and management layers to
support the new PHY layer). It includes backward compatibility for the existing PHY layers in order to enable a
seamless migration to the new technology.
There are differences in the cable spectrum planning practices adopted for different networks in the world. For the new
PHY layer defined in the present document, there is flexibility to deploy the technology in any spectrum plan; therefore,
no special accommodation for different regions of the world is specified for this new PHY layer.
However, due to the inclusion of the DOCSIS 3.0 PHY layers for backward compatibility purposes, there is still a need
for different region-specific physical layer technologies. Therefore, three options for physical layer technologies are
included in the present document. One technology option is based on the downstream channel identification plan that is
deployed in North America using 6 MHz spacing. The second technology option is based on the corresponding
European multi-program television distribution. The third technology option is based on the corresponding Chinese
multi-program television distribution. All three options have the same status, notwithstanding that the document
structure does not reflect this equal priority. The first of these options is defined in clauses 5 and 6 of [1], whereas the
second is defined by replacing the content of those clauses with the content of Annex C of [1]. The third is defined by
replacing the content of those clauses with the content of Annex D of [1]. Correspondingly, [14] and [4] apply only to
the first option, and [5] applies to the second and third. Compliance with the present document means compliance with
one of these implementations, but not with all three. It is not expected that equipment built to one option interoperates
with equipment built to the other.
Compliance with frequency planning and EMC requirements is not covered by the present document and remains the
operators' responsibility. In this respect, [11] and [12] are relevant to the USA; [3] and [i.2] to Canada; [i.4], [6], [7],
[8], [9] and [10] are relevant to the European Union; [13] and [i.1] are relevant to China.
ANSI/SCTE Standard 220-1 defines the interface for the physical layer, and corresponds to the CableLabs
specification [i.3].

Integrirana širokopasovna kabelska telekomunikacijska omrežja (CABLE) - Četrta generacija prenosnih sistemov za storitve interaktivne kabelske televizije - IP-kabelski modemi - 2. del: Fizična plast - DOCSIS® 3.1 [ANSI/SCTE 220-1 2016]

General Information

Status
Published
Publication Date
08-Mar-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Mar-2020
Due Date
09-May-2020
Completion Date
09-Mar-2020

Buy Standard

Standard
ETSI ES 203 311-2 V1.1.1 (2019-05) - Integrated broadband cable telecommunication networks (CABLE); Fourth generation transmission systems for interactive cable television services - IP cable modems; Part 2: Physical layer; DOCSIS® 3.1 [ANSI/SCTE 220-1 2016]
English language
9 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI ES 203 311-2 V1.1.1 (2019-03) - Integrated broadband cable telecommunication networks (CABLE); Fourth generation transmission systems for interactive cable television services - IP cable modems; Part 2: Physical layer; DOCSIS® 3.1 [ANSI/SCTE 220-1 2016]
English language
9 pages
sale 15% off
Preview
sale 15% off
Preview
Standardization document
SIST ES 203 311-2 V1.1.1:2020
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

ETSI ES 203 311-2 V1.1.1 (2019-05)
ETSI STANDARD
Integrated broadband cable
telecommunication networks (CABLE);
Fourth generation transmission systems for interactive
cable television services - IP cable modems;
Part 2: Physical layer;
DOCSIS 3.1
[ANSI/SCTE 220-1 2016]
---------------------- Page: 1 ----------------------
[ANSI/SCTE 220-1 2016] 2 ETSI ES 203 311-2 V1.1.1 (2019-05)
Reference
RES/CABLE-00025-2
Keywords
access, broadband, cable, docsis, endorsement,
IP, IPcable
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.
TM TM TM

DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

TM TM

3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
[ANSI/SCTE 220-1 2016] 3 ETSI ES 203 311-2 V1.1.1 (2019-05)
Contents

Intellectual Property Rights ................................................................................................................................ 4

Foreword ............................................................................................................................................................. 4

Modal verbs terminology .................................................................................................................................... 4

1 Scope ........................................................................................................................................................ 5

2 References ................................................................................................................................................ 5

2.1 Normative references ......................................................................................................................................... 5

2.2 Informative references ........................................................................................................................................ 6

3 Definition of terms, symbols and abbreviations ....................................................................................... 7

3.1 Terms .................................................................................................................................................................. 7

3.2 Symbols .............................................................................................................................................................. 7

3.3 Abbreviations ..................................................................................................................................................... 7

Endorsement notice ............................................................................................................................................ 7

Annex A (informative): Change History ................................................................................................ 8

History ................................................................................................................................................................ 9

ETSI
---------------------- Page: 3 ----------------------
[ANSI/SCTE 220-1 2016] 4 ETSI ES 203 311-2 V1.1.1 (2019-05)
Intellectual Property Rights
Essential patents

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (https://ipr.etsi.org/).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Trademarks

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

Foreword

This ETSI Standard (ES) has been produced by ETSI Technical Committee Integrated broadband cable

telecommunication networks (CABLE).

The present document is part 2 of a multi-part deliverable covering the fourth generation transmission systems for

interactive cable television services - IP cable modems. Full details of the entire series can be found in part 1 [2].

NOTE: DOCSIS is a registered Trade Mark of Cable Television Laboratories, Inc., and is used in the present

document with permission.
Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 4 ----------------------
[ANSI/SCTE 220-1 2016] 5 ETSI ES 203 311-2 V1.1.1 (2019-05)
1 Scope

The present document provides the ETSI endorsement of ANSI/SCTE Standard 220-1 [1].

ANSI/SCTE Standard 220-1 is part of a series of specifications that defines the fourth generation of high-speed data-

over-cable systems, commonly referred to as the DOCSIS 3.1 specifications. The standard was developed for the

benefit of the cable industry, and includes contributions by operators and vendors from

...

Final draft ETSI ES 203 311-2 V1.1.1 (2019-03)
ETSI STANDARD
Integrated broadband cable
telecommunication networks (CABLE);
Fourth generation transmission systems for interactive
cable television services - IP cable modems;
Part 2: Physical layer;
DOCSIS 3.1
[ANSI/SCTE 220-1 2016]
---------------------- Page: 1 ----------------------
[ANSI/SCTE 220-1 2016] 2 Final draft ETSI ES 203 311-2 V1.1.1 (2019-03)
Reference
RES/CABLE-00025-2
Keywords
access, broadband, cable, docsis, endorsement,
IP, IPcable
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.
TM TM TM

DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

TM TM

3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
[ANSI/SCTE 220-1 2016] 3 Final draft ETSI ES 203 311-2 V1.1.1 (2019-03)
Contents

Intellectual Property Rights ................................................................................................................................ 4

Foreword ............................................................................................................................................................. 4

Modal verbs terminology .................................................................................................................................... 4

1 Scope ........................................................................................................................................................ 5

2 References ................................................................................................................................................ 5

2.1 Normative references ......................................................................................................................................... 5

2.2 Informative references ........................................................................................................................................ 6

3 Definition of terms, symbols and abbreviations ....................................................................................... 7

3.1 Terms .................................................................................................................................................................. 7

3.2 Symbols .............................................................................................................................................................. 7

3.3 Abbreviations ..................................................................................................................................................... 7

Endorsement notice ............................................................................................................................................ 7

Annex A (informative): Change History ................................................................................................ 8

History ................................................................................................................................................................ 9

ETSI
---------------------- Page: 3 ----------------------
[ANSI/SCTE 220-1 2016] 4 Final draft ETSI ES 203 311-2 V1.1.1 (2019-03)
Intellectual Property Rights
Essential patents

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (https://ipr.etsi.org/).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Trademarks

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

Foreword

This final draft ETSI Standard (ES) has been produced by ETSI Technical Committee Integrated broadband cable

telecommunication networks (CABLE), and is now submitted for the ETSI standards Membership Approval Procedure.

The present document is part 2 of a multi-part deliverable covering the fourth generation transmission systems for

interactive cable television services - IP cable modems. Full details of the entire series can be found in part 1 [2].

NOTE: DOCSIS is a registered Trade Mark of Cable Television Laboratories, Inc., and is used in the present

document with permission.
Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 4 ----------------------
[ANSI/SCTE 220-1 2016] 5 Final draft ETSI ES 203 311-2 V1.1.1 (2019-03)
1 Scope

The present document provides the ETSI endorsement of ANSI/SCTE Standard 220-1 [1].

ANSI/SCTE Standard 220-1 is part of a series of specifications that defines the fourth generation of high-speed data-

over-cable systems, commonly referred to as the DOCSIS 3.1 specifications. The standard was developed for the

benefit of the cable indust
...

SLOVENSKI STANDARD
SIST ES 203 311-2 V1.1.1:2020
01-maj-2020
Integrirana širokopasovna kabelska telekomunikacijska omrežja (CABLE) - Četrta
generacija prenosnih sistemov za storitve interaktivne kabelske televizije - IP-
kabelski modemi - 2. del: Fizična plast - DOCSIS® 3.1 [ANSI/SCTE 220-1 2016]

Integrated broadband cable telecommunication networks (CABLE) - Fourth generation

transmission systems for interactive cable television services - IP cable modems - Part 2:

Physical layer - DOCSIS® 3.1 [ANSI/SCTE 220-1 2016]
Ta slovenski standard je istoveten z: ETSI ES 203 311-2 V1.1.1 (2019-05)
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
35.100.10 Fizični sloj Physical layer
SIST ES 203 311-2 V1.1.1:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ES 203 311-2 V1.1.1:2020
---------------------- Page: 2 ----------------------
SIST ES 203 311-2 V1.1.1:2020
ETSI ES 203 311-2 V1.1.1 (2019-05)
ETSI STANDARD
Integrated broadband cable
telecommunication networks (CABLE);
Fourth generation transmission systems for interactive
cable television services - IP cable modems;
Part 2: Physical layer;
DOCSIS 3.1
[ANSI/SCTE 220-1 2016]
---------------------- Page: 3 ----------------------
SIST ES 203 311-2 V1.1.1:2020
[ANSI/SCTE 220-1 2016] 2 ETSI ES 203 311-2 V1.1.1 (2019-05)
Reference
RES/CABLE-00025-2
Keywords
access, broadband, cable, docsis, endorsement,
IP, IPcable
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.
TM TM TM

DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

TM TM

3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
SIST ES 203 311-2 V1.1.1:2020
[ANSI/SCTE 220-1 2016] 3 ETSI ES 203 311-2 V1.1.1 (2019-05)
Contents

Intellectual Property Rights ................................................................................................................................ 4

Foreword ............................................................................................................................................................. 4

Modal verbs terminology .................................................................................................................................... 4

1 Scope ........................................................................................................................................................ 5

2 References ................................................................................................................................................ 5

2.1 Normative references ......................................................................................................................................... 5

2.2 Informative references ........................................................................................................................................ 6

3 Definition of terms, symbols and abbreviations ....................................................................................... 7

3.1 Terms .................................................................................................................................................................. 7

3.2 Symbols .............................................................................................................................................................. 7

3.3 Abbreviations ..................................................................................................................................................... 7

Endorsement notice ............................................................................................................................................ 7

Annex A (informative): Change History ................................................................................................ 8

History ................................................................................................................................................................ 9

ETSI
---------------------- Page: 5 ----------------------
SIST ES 203 311-2 V1.1.1:2020
[ANSI/SCTE 220-1 2016] 4 ETSI ES 203 311-2 V1.1.1 (2019-05)
Intellectual Property Rights
Essential patents

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (https://ipr.etsi.org/).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Trademarks

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

Foreword

This ETSI Standard (ES) has been produced by ETSI Technical Committee Integrated broadband cable

telecommunication networks (CABLE).

The present document is part 2 of a multi-part deliverable covering the fourth generation transmission systems for

interactive cable television services - IP cable modems. Full details of the entire series can be found in part 1 [2].

NOTE: DOCSIS is a registered Trade Mark of Cable Television Laboratories, Inc., and is used in the present

document with permission.
Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 6 --------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.