SIST EN ISO 17419:2018/oprA1:2023

Intelligent transport systems - Cooperative systems - Globally unique identification - Amendment 1: Regions of a closed polygon in a plane (ISO 17419:2018/DAM 1:2023)

Intelligente Verkehrssysteme - Kooperative Systeme - Global eindeutige Identifikation - Ergänzung 1 (ISO 17419:2018/DAM 1:2023)

Systèmes intelligents de transport - Systèmes coopératifs - Identification unique au niveau global - Amendement 1: Régions d'un polygone fermé dans un plan (ISO 17419:2018/DAM 1:2023)

Inteligentni transportni sistemi - Kooperativni sistemi - Globalna enotna identifikacija - Dopolnilo 1: Območja zaprtega mnogokotnika v ravnini (ISO 17419:2018/DAM 1:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 13-Sep-2023
• ICS: 03.220.20 - Road transport
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: ITC - Information technology
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 24-Jul-2023
• Due Date: 11-Dec-2023
• Ref Project: EN ISO 17419:2018/prA1:2023 - Intelligent transport systems - Cooperative systems - Globally unique identification - Amendment 1: Regions of a closed polygon in a plane (ISO 17419:2018/DAM 1:2023)

Relations

• Amends: SIST EN ISO 17419:2018 - Intelligent transport systems - Cooperative systems - Globally unique identification (ISO 17419:2018)
• Effective Date: 22-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17419:2018/oprA1:2023
01-september-2023
Inteligentni transportni sistemi - Kooperativni sistemi - Globalna enotna
identifikacija - Dopolnilo 1: Območja zaprtega mnogokotnika v ravnini (ISO
17419:2018/DAM 1:2023)
Intelligent transport systems - Cooperative systems - Globally unique identification -
Amendment 1: Regions of a closed polygon in a plane (ISO 17419:2018/DAM 1:2023)
Intelligente Verkehrssysteme - Kooperative Systeme - Global eindeutige Identifikation -
Ergänzung 1 (ISO 17419:2018/DAM 1:2023)
Systèmes intelligents de transport - Systèmes coopératifs - Identification unique au
niveau global - Amendement 1: Régions d'un polygone fermé dans un plan (ISO
17419:2018/DAM 1:2023)
Ta slovenski standard je istoveten z: EN ISO 17419:2018/prA1:2023
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST EN ISO 17419:2018/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 17419:2018/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 17419:2018/oprA1:2023
DRAFT AMENDMENT
ISO 17419:2018/DAM 1
ISO/TC 204 Secretariat: ANSI
Voting begins on: Voting terminates on:
2023-06-27 2023-09-19
Intelligent transport systems — Cooperative systems —
Globally unique identification
AMENDMENT 1: Regions of a closed polygon in a plane
ICS: 35.240.60; 03.220.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 17419:2018/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
SIST EN ISO 17419:2018/oprA1:2023
ISO 17419:2018/DAM 1:2023(E)
DRAFT AMENDMENT
ISO 17419:2018/DAM 1
ISO/TC 204 Secretariat: ANSI
Voting begins on: Voting terminates on:

Intelligent transport systems — Cooperative systems —
Globally unique identification
AMENDMENT 1: Regions of a closed polygon in a plane
ICS: 35.240.60; 03.220.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO 17419:2018/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
SIST EN ISO 17419:2018/oprA1:2023
ISO 17419:2018/DAM 1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
This document was prepared by ISO/TC 204, Intelligent transport systems.
Amendment 1 provides the specification of a closed poly
...