SIST EN ISO 9626:2000/A1:2002

Stainless steel needle tubing for the manufacture of medical devices (ISO 9626:1991/AM 1:2001)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Contact Mr Vyze ext 850 when processing this project through each stage

Edelstahlrohr zur Herstellung von Medizinprodukten (ISO 9626:1991/AM 1:2001)

Diese Internationale Norm beschreibt Maße und mechanische Eigenschaften von Edelstahlrohr mit normaler und dünner Rohrwand der nominalen metrischen Abmessungen von 3,4 mm bis 0,2 mm und von Rohren mit extra dünner Rohrwand der nominalen metrischen Abmessungen von 2,1 mm bis 0,6 mm.

Tubes d'aiguilles en acier inoxydable pour la fabrication de matériel médical (ISO 9626:1991/AM 1:2001)

Igle iz nerjavnega jekla za izdelavo medicinskih pripomočkov (ISO 9626:1991/AM1:2001)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2002
• Withdrawal Date: 17-Oct-2016
• ICS: 11.040.25 - Syringes, needles an catheters
• Technical Committee: VAZ - Healthcare
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 18-Oct-2016
• Due Date: 10-Nov-2016
• Completion Date: 18-Oct-2016
• Ref Project: EN ISO 9626:1995/A1:2001 - Stainless steel needle tubing for the manufacture of medical devices (ISO 9626:1991/AM 1:2001)

Relations

• Replaced By: SIST EN ISO 9626:2016 - Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods (ISO 9626:2016)
• Effective Date: 01-Nov-2016
• Amends: SIST EN ISO 9626:2000 - Stainless steel needle tubing for the manufacture of medical devices (ISO 9626:1991)
• Effective Date: 22-Dec-2008
• Amends: SIST EN ISO 9626:2000 - Stainless steel needle tubing for the manufacture of medical devices (ISO 9626:1991)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9626:2000/A1:2002
01-maj-2002
,JOHL]QHUMDYQHJDMHNOD]DL]GHODYRPHGLFLQVNLKSULSRPRþNRY,62
$0
Stainless steel needle tubing for the manufacture of medical devices (ISO 9626:1991/AM
1:2001)
Edelstahlrohr zur Herstellung von Medizinprodukten (ISO 9626:1991/AM 1:2001)
Tubes d'aiguilles en acier inoxydable pour la fabrication de matériel médical (ISO
9626:1991/AM 1:2001)
Ta slovenski standard je istoveten z: EN ISO 9626:1995/A1:2001
ICS:
11.040.25 Injekcijske brizge, igle in Syringes, needles an
katetri catheters
SIST EN ISO 9626:2000/A1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9626:2000/A1:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 9626:2000/A1:2002
EUROPEAN STANDARD
EN ISO 9626:1995/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2001
ICS 11.040.20
English version
Stainless steel needle tubing for the manufacture of medical
devices (ISO 9626:1991/AM 1:2001)
Tubes d'aiguilles en acier inoxydable pour la fabrication de Edelstahlrohr zur Herstellung von Medizinprodukten (ISO
matériel médical (ISO 9626:1991/AM 1:2001) 9626:1991/AM 1:2001)
This amendment A1 modifies the European Standard EN ISO 9626:1995; it was approved by CEN on 1 June 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9626:1995/A1:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9626:2000/A1:2002
Page 2
EN ISO 9626:1995/A1:2001
Foreword
Corrected 2001-12-12
The text of this Amendment EN ISO 9626:1995/A1:2001 to the EN ISO 9626:1995 has
been prepared by Technical Committee ISO/TC 84 "Medical devices for injections" in
collaboration with Technical Committee CEN/TC 205 "Non-active medical devices", the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by
publication of an identical text or by endorsement, at the latest by December 2001, and
conflicting national standards shall be withdrawn at the latest by December 2001.
According to the CEN/CENELEC Internal Regulations, the national standards
organizations of the following countries are bound to implement this European Standard:
Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
Endorsement notice
The text of the Amendment to the International Standard ISO 9626:1991/AM 1:2001 has
been approved by CEN as an Amendment to the European Standard without any
modification.
NOTE Normative references to International Standards are listed in annex ZA (normative).

---------------------- Page: 4 ----------------------

SIST EN ISO 9626:2000/A1:2002
Page 3
EN ISO 9626:1995/A1:2001
Annex ZA
(normative)
Normative references to international publications with their relevant
European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and
the publications are listed hereafter. For dated references, subsequent amendments to or
revisions of any of these publications apply to this European Standard only when
incorporated in it by amendment or revision. For undated references the latest edition of
the publication referred to applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated by
(mod.), the relevant EN/HD applies.
Publication Year Title EN/HD Year
ISO 3696 1987 Water for analytical laboratory use - EN ISO 3696 1995
Specification and test methods

---------------------- Page: 5 ----------------------

SIST EN ISO 9626:2000/A1:2002

---------------------- Page: 6 ----------------------

SIST EN ISO 9626:2000/A1:2002
INTERNATIONAL ISO
STANDARD 9626
First edition
1991-09-01
AMENDMENT 1
2001-06-01
Stainless steel needle tubing for the
manufacture of medical devices —
AMENDMENT 1
Tubes d'aiguilles en acier inoxydable pour la fabrication de matériel
médical —
AMENDEMENT 1
Reference number
ISO 9626:1991/Amd.1:2001(E)
©
ISO 2001

---------------------- Page: 7 ----------------------

SIST EN ISO 9626:2000/A1:2002
ISO 9626:1991/Amd.1:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2001 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 9626:2000/A1:2002
ISO 9626:1991/Amd.1:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical stand
...