SIST EN 300 286-2 V1.2.4:2005

• Abstract:

  Update references from ETS 300 102-1 and associated I-ETSs to ETS 300 403.

• Status: Published
• Publication Date: 31-Mar-2005
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Apr-2005
• Due Date: 01-Apr-2005
• Completion Date: 01-Apr-2005
• Ref Project: ETSI EN 300 286-2 V1.2.4 (1998-06) - Integrated Services Digital Network (ISDN); User-to-User Signalling (UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

SIST EN 300 286-2 V1.2.4:2005 is the Slovene adoption of ETSI EN 300 286-2 Version 1.2.4, produced by ETSI Technical Committee Signalling Protocols and Switching (SPS). It specifies the Protocol Implementation Conformance Statement (PICS) proforma for the Integrated Services Digital Network (ISDN) User-to-User Signalling (UUS) supplementary service using the Digital Subscriber Signalling System No. one (DSS1) protocol. It is intended for suppliers and conformance testers of user and network implementations that claim conformance to EN 300 286-1.

What does SIST EN 300 286-2 V1.2.4:2005 specify?

SIST EN 300 286-2 V1.2.4:2005 specifies the PICS proforma for stage three of the ISDN UUS supplementary service over DSS1 at the T reference point, or at coincident S and T reference points. It gives the questionnaire and completion rules used to state which capabilities, options and procedures an implementation supports.

The document is organized as follows:

Annex	What it covers
Annex A	Normative PICS proforma for EN 300 286-1
Annex B	Normative requirements list used with the basic call, generic functional protocol and supplementary service interactions PICS proformas
Annex C	Informative changes with respect to the previous ETS 300 286-2

Clause 1 states that the supplier of an implementation claiming conformance to EN 300 286-1 must complete the PICS proforma in Annex A and identify both the supplier and the implementation. Clause 2 names the supporting standards, and clauses 3 to 5 define the terms, abbreviations and conformance conditions used in the proforma.

What are the key requirements of SIST EN 300 286-2 V1.2.4:2005?

Clause 5 sets the core conformance rule: a conforming PICS shall be technically equivalent to Annex A and shall keep the numbering and order of the Annex A items. In practice, that means the completed form must follow the standard structure exactly so that test selection and conformance review can be done consistently.

Conformance statement and identification

A conforming PICS must describe an implementation that claims conformance to EN 300 286-1, must be completed according to the instructions in A.1, and must include enough information to identify the supplier and the implementation. Annex A then asks for identification of the Implementation Under Test (IUT), the System Under Test (SUT), the product supplier, the client and the PICS contact person. This matters because the PICS is tied to a specific product build and configuration, not to a generic service description.

Roles and completion rules

Annex A separates the implementation into Roles, User and Network sections. The Roles subclause is completed for all implementations, while the User clause is used only for user implementations, including private network implementations, and the Network clause only for network implementations. This keeps user-side and network-side claims distinct, which is important when the same product can play different network roles.

What Annex A asks you to declare

Annex A organizes the conformance statement into major capabilities, subsidiary capabilities, protocol data units, protocol data unit parameters, timers and call states. For user implementations, it covers service 1, service 2 and service 3, flow control, messages such as USER INFORMATION and CONGESTION CONTROL, and the UserUserService information element. For network implementations, it mirrors the same structure for the network role, including the handling of USER INFORMATION and CONGESTION CONTROL and the related Facility information element components.

Timers and service behavior

Annex A includes timer items for both user and network implementations, including the named UUS3 timers in the User and Network clauses. The practical point is that a supplier must declare whether the implementation supports the timer behavior associated with the service procedures, because that affects interoperability and test results.

How Annex B is used

Annex B is a requirements list that repeats selected items from the basic call PICS, the generic functional protocol PICS and the supplementary service interactions PICS. It does not create a new questionnaire; instead, it tells the user where the same support claim must also be made in the related base proformas. In practice, Annex B links UUS support to EN 300 403-3, EN 300 196-2 and EN 300 195-2 so that all dependent conformance statements stay aligned.

How conformance is reviewed

The document defines a static conformance review as a comparison between the completed PICS and the static conformance requirements in the relevant standards. That is why the form is structured around support declarations for capabilities, procedures and information elements: it is meant to document what has been implemented before testing or auditing begins.

What terms does SIST EN 300 286-2 V1.2.4:2005 define?

• Protocol Implementation Conformance Statement (PICS) - a statement by the supplier of an OSI implementation or system saying which capabilities are implemented for a given protocol.
• PICS proforma - a questionnaire-style document that becomes the PICS once it is completed.
• Static conformance review - a comparison of the PICS with the static conformance requirements in the relevant standard.
• Implementation Under Test (IUT) - the implementation whose conformance is being assessed.
• System Under Test (SUT) - the system in which the IUT resides.
• System Conformance Statement (SCS) - a document that summarizes which standards are implemented and what conformance is claimed.
• User-to-User Signalling (UUS) - the supplementary service covered by this part of the EN 300 286 series.

Who uses SIST EN 300 286-2 V1.2.4:2005?

Suppliers of ISDN DSS1 implementations use this standard to prepare a PICS for products that claim conformance to EN 300 286-1. Test laboratories and conformance teams use it to review implemented options and to select relevant test cases.

Network operators, private network vendors and protocol developers use it when they need to state support for the user and network roles separately. Quality managers and buyers use it to check which services, message types, timers and optional procedures are claimed for a given implementation.

What changed in SIST EN 300 286-2 V1.2.4:2005 from the previous edition?

Annex C states that this edition converts the document to EN layout. It also replaces references to ETS 300 102 with EN 300 403, replaces references to I-ETSs with EN 300 403, and updates non-specific references to basic standards so they point to later versions where that was intended.

Which standards are used with SIST EN 300 286-2 V1.2.4:2005?

Standard	What it contributes
EN 300 403-1	Basic call control signalling network layer reference used in the updated references
EN 300 403-3	Basic call PICS proforma items referenced in Annex B
EN 300 195-1	Protocol specification for supplementary service interactions
EN 300 195-2	PICS proforma items for supplementary service interactions
EN 300 196-1	Generic functional protocol for supplementary services
EN 300 196-2	PICS proforma items for the generic functional protocol
EN 300 286-1 (V1.2)	The UUS protocol specification that this PICS describes
ISO/IEC 9646-1	General conformance testing concepts and PICS terminology
ISO/IEC 9646-7	Guidance for implementation conformance statements and proforma layout
CCITT Recommendation I.130	Method for characterizing telecommunication services in ISDN
ITU-T Recommendation I.411	ISDN user-network reference configurations

The foreword also places this part in the EN 300 286 series with Part 1 as the protocol specification, Parts 3 and 5 as TSS&TP specifications for user and network, and Parts 4 and 6 as ATS and partial PIXIT proforma specifications for user and network.

What does the SIST EN 300 286-2 V1.2.4:2005 document contain?

• A completed-form questionnaire structure in Annex A with identification fields, a global conformance statement and separate user/network sections.
• Tables for major capabilities, subsidiary capabilities, protocol data units, parameters, timers and call states.
• A requirements list in Annex B that maps UUS-related claims to the basic call, generic functional protocol and supplementary service interactions proformas.
• Explanatory text for completion, support notation and reference handling, so the same form can be used for conformance documentation and review.
• An informative change note in Annex C and the standard front matter, including references, abbreviations and conformance conditions.

SLOVENSKI STANDARD
01-april-2005
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL,6'1'RSROQLOQDVWRULWHY
PHGXSRUDEQLãNDVLJQDOL]DFLMD8863URWRNROGLJLWDOQHQDURþQLãNHVLJQDOL]DFLMH
ãW'66GHO,]MDYDRVNODGQRVWLL]YHGEHSURWRNROD3,&63URIRUPD
VSHFLILNDFLMD
Integrated Services Digital Network (ISDN); User-to-User Signalling (UUS)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Ta slovenski standard je istoveten z: EN 300 286-2 Version 1.2.4
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 300 286-2 V1.2.4 (1998-06)
European Standard (Telecommunications series)
Integrated Services Digital Network (ISDN);
User-to-User Signalling (UUS) supplementary service;
Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 2: Protocol Implementation Conformance
Statement (PICS) proforma specification

2 EN 300 286-2 V1.2.4 (1998-06)
Reference
REN/SPS-05145-T-2 (2nci0iqo.PDF)
Keywords
ISDN, UUS, DSS1, supplementary service, PICS
ETSI
Postal address
F-06921 Sophia Antipolis Cedex - FRANCE
Office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.: [phone]  Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Internet
[e-mail]
http://www.etsi.fr
http://www.etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998.
All rights reserved.
ETSI
3 EN 300 286-2 V1.2.4 (1998-06)
Contents
Intellectual Property Rights.5
Foreword .5
1 Scope.6
2 Normative references .6
3 Definitions.7
4 Abbreviations.7
5 Conformance.8
Annex A (normative): PICS proforma for EN 300 286-1 .9
A.1 Instructions for completing the PICS proforma.9
A.1.1 Identification of the implementation . 9
A.1.2 Global statement of conformance . 9
A.1.3 Explanation of PICS proforma subclauses. 9
A.1.4 Symbols, abbreviations and terms. 10
A.2 Identification of the implementation.10
A.2.1 Implementation Under Test (IUT) identification . 10
A.2.2 System Under Test (SUT) identification. 10
A.2.3 Product supplier. 11
A.2.4 Client . 11
A.2.5 PICS contact person. 11
A.3 PICS/System Conformance Statement (SCS).12
A.4 Identification of the protocol .12
A.5 Global statement of conformance .12
A.6 Roles.13
A.7 User .14
A.7.1 Major capabilities . 14
A.7.2 Subsidiary capabilities . 15
A.7.3 Protocol data units . 15
A.7.4 Protocol data units parameters. 16
A.7.5 Timers. 20
A.7.6 Call states. 20
A.8 Network.20
A.8.1 Major capabilities . 21
A.8.2 Subsidiary capabilities . 21
A.8.3 Protocol data units . 22
A.8.4 Protocol data unit parameters. 22
A.8.5 Timers. 26
A.8.6 Call states. 26
Annex B (normative): Requirements list.27
B.1 User .27
B.1.1 Requirements on items used in the basic call PICS . 27
B.1.2 Requirements on items used in the generic functional protocol PICS . 27
B.1.3 Requirements on items used in the supplementary service interactions PICS.29
B.2 Network.30
B.2.1 Requirements on items used in the basic call PICS . 30
B.2.2 Requirements on items used in the generic functional protocol PICS . 30
ETSI
4 EN 300 286-2 V1.2.4 (1998-06)
B.2.3 Requirements on items used in the supplementary services interactions PICS . 33
Annex C (informative): Changes with respect to the previous ETS 300 286-2 .34
History.35
ETSI
5 EN 300 286-2 V1.2.4 (1998-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (http://www.etsi.fr/ipr or http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Signalling
Protocols and Switching (SPS).
The present document is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. one
(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) User-to-User Signalling (UUS)
supplementary service, as described below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the user";
Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network";
Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the network".
To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and
options have been implemented for a given Open Systems Interconnection (OSI) protocol. Such a statement is called a
Protocol Implementation Conformance Statement (PICS).
The present version updates the references to the basic call specifications.
National transposition dates
Date of adoption of this EN: 19 June 1998
Date of latest announcement of this EN (doa): 30 September 1998
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 1999
Date of withdrawal of any conflicting National Standard (dow): 31 March 1999
ETSI
6 EN 300 286-2 V1.2.4 (1998-06)
1 Scope
This second part of EN 300 286 is applicable to the stage three of the User-to-User Signalling (UUS) supplementary
service for the pan-European Integrated Services Digital Network (ISDN) as provided by European public
telecommunications operators at the T reference point or coincident S and T reference point (as defined in
ITU-T Recommendation I.411 [11]) by means of the Digital Subscriber Signalling System No. one (DSS1) protocol.
Stage three identifies the protocol procedures and switching functions needed to support a telecommunications service
(see CCITT Recommendation I.130 [10]).
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the ISDN
DSS1 UUS supplementary service protocol as specified in EN 300 286-1 [6] in compliance with the relevant
requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [9].
The supplier of a protocol implementation which is claimed to conform to EN 300 286-1 [6] is required to complete a
copy of the PICS proforma provided in annex A of the present document and is required to provide the information
necessary to identify both the supplier and the implementation.
2 Normative references
References may be made to:
a) specific versions of publications (identified by date of publication, edition number, version number, etc.), in
which case, subsequent revisions to the referenced document do not apply; or
b) all versions up to and including the identified version (identified by "up to and including" before the version
identity); or
c) all versions subsequent to and including the identified version (identified by "onwards" following the version
identity); or
d) publications without mention of a specific version, in which case the latest version applies.
A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System
No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1:
Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[2] EN 300 195-1: "Integrated Services Digital Network (ISDN); Supplementary service interactions;
Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification".
[3] EN 300 195-2: "Integrated Services Digital Network (ISDN); Supplementary service interactions;
Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation
Conformance Statement (PICS) proforma specification".
[4] EN 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for the
support of supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1 Protocol specification".
[5] EN 300 196-2: "Integrated Services Digital Network (ISDN); Generic functional protocol for the
support of supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification".
[6] EN 300 286-1 (V1.2): "Integrated Services Digital Network (ISDN); User-to-User Signalling
(UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[7] EN 300 403-3: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System
No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 3:
Protocol Implementation Conformance Statement (PICS) proforma specification".
ETSI
7 EN 300 286-2 V1.2.4 (1998-06)
[8] ISO/IEC 9646-1: "Information technology - Open systems interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[9] ISO/IEC 9646-7: "Information technology - Open systems interconnection - Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
[10] CCITT Recommendation I.130 (1988): "Method for the characterization of telecommunication
services supported by an ISDN and network capabilities of an ISDN".
[11] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces - Reference configurations".
3 Definitions
For the purposes of the present document, the following definitions apply, in addition to those given in
EN 300 286-1 [6]:
Protocol Implementation Conformance Statement (PICS): A statement made by the supplier of an Open Systems
Interconnection (OSI) implementation or system, stating which capabilities have been implemented for a given OSI
protocol (see ISO/IEC 9646-1 [8]).
PICS proforma: A document, in the form of a questionnaire, designed by the protocol specifier or conformance test
suite specifier, which, when completed for an OSI implementation or system becomes the PICS (see
ISO/IEC 9646-1 [8]).
static conformance review: A review of the extent to which the static conformance requirements are met by the IUT,
accomplished by comparing the PICS with the static conformance requirements expressed in the relevant standard(s)
(see ISO/IEC 9646-1 [8]).
4 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AND Boolean "and"
C Conditional requirement (to be observed if the relevant conditions apply)
DSS1 Digital Subscriber Signalling System No. one
IER Information Elements Received
IET Information Elements Transmitted
ISDN Integrated Services Digital Network
IUT Implementation Under Test
M Mandatory requirement (to be observed in all cases)
MC Major Capabilities
MR Messages Received
MT Messages Transmitted
N/A Not applicable, not supported or the conditions for status are not met
No not supported
NOT Boolean "not"
O Option (may be selected to suit the implementation, provided that any requirements applicable to
the option are observed)
O.n Options, but support required for either at least one or only one of the options in the group labelled
with the same numeral "n"
OR Boolean "or"
OSI Open Systems Interconnection
P Parameters
PICS Protocol Implementation Conformance Statement
SC Subsidiary Capabilities
SCS System Conformance Statement
SUT System Under Test
TM Timers
ETSI
8 EN 300 286-2 V1.2.4 (1998-06)
UUS User-to-User Signalling
Yes supported
5 Conformance
A PICS proforma which conforms to this PICS proforma specification shall be technically equivalent to annex A, and
shall preserve the numbering and ordering of the items in annex A.
A PICS which conforms to this PICS proforma specification shall:
a) describe an implementation which claims to conform to EN 300 286-1 [6];
b) be a conforming ICS proforma which has been completed in accordance with the instructions for completion
given in clause A.1;
c) include the information necessary to uniquely identify both the supplier and the implementation.
ETSI
9 EN 300 286-2 V1.2.4 (1998-06)
Annex A (normative):
PICS proforma for EN 300 286-1
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users
of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended
purposes and may further publish the completed PICS.
A.1 Instructions for completing the PICS proforma
A.1.1 Identification of the implementation
Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test
(SUT)) should be filled in so as to provide as much detail as possible regarding version numbers and configuration
options.
The product supplier information and client information should both be filled in if they are different.
A person who can answer queries regarding information supplied in the PICS should be named as the contact person.
The SCS as defined in ISO/IEC 9646-1 [8] is a document supplied by the client or product supplier that summarizes
which OSI International Standards, ITU-T (CCITT) Recommendations, ETSs or other standards are implemented and to
which conformance is claimed. The PICS/SCS subclause should describe the relationship of the PICS to the SCS.
A.1.2 Global statement of conformance
If the answer to the statement in this subclause is "Yes", all subsequent subclauses should be completed to facilitate
selection of test cases for optional functions.
If the answer to the statement in this subclause is "No", all subsequent subclauses should be completed, and all non-
supported mandatory capabilities should be identified and explained. Explanations may be entered in the comments field
at the bottom of each table or on attached sheets of paper.
A.1.3 Explanation of PICS proforma subclauses
The PICS proforma contains a Roles clause and thereafter is presented in two parts (for user and network) with the
following subclauses, as required:
- major capabilities;
- subsidiary capabilities;
- protocol data unit support;
- protocol data unit parameters;
- timers;
- call states.
The User clause shall only be completed for user implementations (including private network implementations) while
the Network clause shall only be completed for network implementations. The Roles subclause shall be completed for
all implementations.
The relationship between this PICS proforma and other related PICS proforma (e.g. the basic call PICS proforma) is
expressed in the requirements list contained in annex B. This provides the additional restrictions placed on the related
proforma (different conditions, different status, etc.).
ETSI
10 EN 300 286-2 V1.2.4 (1998-06)
A.1.4 Symbols, abbreviations and terms
The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the
guidelines presented in ISO/IEC 9646-7 [9].
The reference column contained in the tables gives reference to the appropriate part(s) of EN 300 286-1 [6] describing
the particular item. Note, however, that a reference merely indicates the place where the core of a description of an item
can be found. Any additional information contained in EN 300 286-1 [6] has to be taken into account when making a
statement about the conformance of that particular item.
The following common notations, defined in ISO/IEC 9646-7 [9], are used for the status column:
M mandatory
O optional
N/A not applicable
O. for mutually exclusive or selectable options from a set
The following common notations, defined in ISO/IEC 9646-7 [9], are used for the support column:
Y for supported/implemented
N for not supported/not implemented
A.2 Identification of the implementation
A.2.1 Implementation Under Test (IUT) identification
IUT name:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
IUT version:
.........................................................................................................................................................................................
A.2.2 System Under Test (SUT) identification
SUT name:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Hardware configuration:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Operating system:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
ETSI
11 EN 300 286-2 V1.2.4 (1998-06)
A.2.3 Product supplier
Name:
.........................................................................................................................................................................................
Address:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................................
Additional information:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
A.2.4 Client
Name:
.........................................................................................................................................................................................
Address:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................................
Additional information:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
A.2.5 PICS contact person
Name:
.........................................................................................................................................................................................
ETSI
12 EN 300 286-2 V1.2.4 (1998-06)
Address:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................................
Additional information:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
A.3 PICS/System Conformance Statement (SCS)
Provide the relationship of the PICS with the SCS for the system:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
A.4 Identification of the protocol
This PICS proforma applies to the following standard:
EN 300 286-1 (V1.2): "Integrated Services Digital Network (ISDN); User-to-User Signalling (UUS) supplementary
service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification".
A.5 Global statement of conformance
The implementation described in this PICS meets all the mandatory requirements of the referenced standard?
[ ] Yes
[ ] No
ETSI
13 EN 300 286-2 V1.2.4 (1998-06)
NOTE: Answering "No" to this question indicates non-conformance to the protocol specification. Non-supported
mandatory capabilities are to be identified in the PICS, with an explanation of why the implementation is
non-conforming. Explanations may be entered in the comments field at the bottom of each table or on
attached pages.
In the tabulations which follow, all references are to EN 300 286-1 [6] unless another numbered reference is explicitly
indicated.
A.6 Roles
Table A.1: Type of implementation
Item Major role: Conditions for Status Reference Support
Does the implementation. status
Type of implementation
R 1 not used
R 2.1 support user requirements? O.1 9, 10 [ ]Yes [ ]No
R 2.2 support network requirements? O.1 9, 10 [ ]Yes [ ]No
R 3.1 support requirements at the coincident S and T R 2.1 O.2 9 [ ]Yes [ ]No
reference point? R 2.2 O.3
R 3.2 support requirements for i
...