SIST EN 13445-4:2002/A3:2009

Unfired pressure vessels - Part 4: Fabrication - Amendment A3

Amendment for production test plates and updating of welding standards.

Unbefeuerte Druckbehälter - Teil 4: Herstellung

Récipients sous pression non soumis a la flamme - Partie 4 : Fabrication

Neogrevane tlačne posode - 4. del: Proizvodnja - Dopolnilo A3

General Information

• Status: Withdrawn
• Publication Date: 22-Feb-2009
• Withdrawal Date: 19-Jan-2010
• ICS: 23.020.32 - Pressure vessels
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 30-Dec-2009
• Due Date: 22-Jan-2010
• Completion Date: 20-Jan-2010
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 13445-4:2002/A3:2009 - Unfired pressure vessels - Part 4: Fabrication

Relations

• Amends: SIST EN 13445-4:2002 - Unfired pressure vessels - Part 4: Fabrication
• Effective Date: 01-Apr-2009
• Replaced By: SIST EN 13445-4:2009 - Unfired pressure vessels - Part 4: Fabrication
• Effective Date: 08-Jun-2022
• Replaced By: SIST EN 13445-4:2009 - Unfired pressure vessels - Part 4: Fabrication
• Effective Date: 01-Nov-2009
• Amends: SIST EN 13445-4:2002 - Unfired pressure vessels - Part 4: Fabrication
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI SIST EN 13445-
4:2002/oprA3:2006

PREDSTANDARD
april 2006
Neogrevane tlačne posode – 4. del: Proizvodnja
Unfired pressure vessels - Part 4: Fabrication
ICS 23.020.30 Referenčna številka
SIST EN 13445-4:2002/oprA3:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
DRAFT
EN 13445-4:2002
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA3
February 2006
ICS 23.020.30

English Version
Unfired pressure vessels - Part 4: Fabrication
Unbefeuerte Druckbehälter - Teil 4: Herstellung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 54.
This draft amendment A3, if approved, will modify the European Standard EN 13445-4:2002. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-4:2002/prA3:2006:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 13445-4:2002/prA3:2006 (E)
Contents Page
Foreword.3
1 Modification of normative references.4
2 Modification of the text of the note to h in Table 5.4-3 .5
1
3 Modification of the text of paragraph a) in sub-clause 7.3.5
4 Modification of the text of sub-clause 8.2 .5
5 Modification of the text of sub-clause 9.3.2.3 .7
6 Modification of the text of sub-clause 9.5.2 .7
7 Modification of the text of sub-clause 9.6.2 .7
8 Modification of the text of sub-clause 9.6.3 .7

2

---------------------- Page: 3 ----------------------

EN 13445-4:2002/prA3:2006 (E)
Foreword
This document (EN 13445-4:2002/prA3:2006) has been prepared by Technical Committee CEN/TC 54
“Unfired pressure vessels”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association and supports essential requirements of EU Directive(s).

3

---------------------- Page: 4 ----------------------

EN 13445-4:2002/prA3:2006 (E)
1 Modification of normative references
In clause 2 "Normative references" the following references shall be changed:
Delete
EN 288-2:1992, Specification and approval of welding procedures for metallic materials — Part 2: Welding
procedure specification for arc welding.
and replace with
"EN ISO 15609-1:2004, Specification and qualification of welding procedures for metallic materials — Welding
procedure specification — Part 1: Arc welding (ISO 15609-1:2004)"

Delete
EN 288-3:1992, Specification and approval of welding procedures for metallic materials — Part 3: Welding
procedure tests for the arc welding of steels.
and replace with
"EN ISO 15614-1:2004, Specification and qualification of welding procedures for metallic materials —
Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
(ISO 15614-1:2004)"

Delete
EN 288-6:1994, Specification and approval of welding procedures for metallic materials — Part 6: Approval
related to previous experience
and replace with
"EN ISO 15611:2003, Specification and qualification of welding procedures for metallic materials —
Qualification based on previous welding experience (ISO 15611:2003); German version EN ISO 15611:2003"
Delete
EN 288-7:1995, Specification and approval of welding procedures for metallic materials — Part 7: Approval by
a standard welding procedure for arc welding
and replace with
"EN ISO 15612:2004, Specification and qualification of welding procedures for metallic materials —
Qualification by adoption of a standard welding procedure (ISO 15612:2004)"

Delete
EN 288-8:1995, Specification and approval of welding procedures for metallic materials — Part 8: Approval by
a pre-production welding test
and replace with
"EN ISO 15613:2004, Specification and qualification of welding procedures for metallic materials —
Qualification based on pre-production welding test (ISO 15613:2004)"

Furthermore, all references in this clause shall be indicated as dated references (also see Guideline 10/5).

4

---------------------- Page: 5 --
...

SLOVENSKI STANDARD
SIST EN 13445-4:2002/A3:2009
01-april-2009
1HRJUHYDQHWODþQHSRVRGHGHO3URL]YRGQMD'RSROQLOR$
Unfired pressure vessels - Part 4: Fabrication - Amendment A3
Unbefeuerte Druckbehälter - Teil 4: Herstellung
Récipients sous pression non soumis a la flamme - Partie 4 : Fabrication
Ta slovenski standard je istoveten z: EN 13445-4:2002/A3:2009
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-4:2002/A3:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13445-4:2002/A3:2009

---------------------- Page: 2 ----------------------

SIST EN 13445-4:2002/A3:2009
EUROPEAN STANDARD
EN 13445-4:2002/A3
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2009
ICS 23.020.30
English Version
Unfired pressure vessels - Part 4: Fabrication
Récipients sous pression non soumis à la flamme - Partie Unbefeuerte Druckbehälter - Teil 4: Herstellung
4: Fabrication
This amendment A3 modifies the European Standard EN 13445-4:2002; it was approved by CEN on 9 August 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-4:2002/A3:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13445-4:2002/A3:2009
EN 13445-4:2002/A3:2009 (E)
Contents Page
1 Modification of normative references .4
2 Modification of the text of the note to h in Table 5.4-3 .5
1
3 Modification of the text of paragraph a) in sub-clause 7.3 .5
4 Modification of the text of sub-clause 8.2 .5
5 Modification of the text of sub-clause 9.3.2.3 .7
6 Modification of the text of sub-clause 9.5.2 .7
7 Modification of the text of sub-clause 9.6.2 .7
8 Modification of the text of sub-clause 9.6.3 .7

2

---------------------- Page: 4 ----------------------

SIST EN 13445-4:2002/A3:2009
EN 13445-4:2002/A3:2009 (E)
Foreword
This document (EN 13445-4:2002/A3:2009) has been prepared by Technical Committee CEN/TC 54 “Unfired
pressure vessels”, the secretariat of which is held by BSI.
This Amendment to the European Standard EN 13445-4:2002 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by July 2009, and conflicting national
standards shall be withdrawn at the latest by July 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annex ZA, which is an integral part of this document.
This document includes the text of the amendment itself. The corrected pages of EN 13445-4 will be delivered
as issue 35 of the standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.


3

---------------------- Page: 5 ----------------------

SIST EN 13445-4:2002/A3:2009
EN 13445-4:2002/A3:2009 (E)
1 Modification of normative references
In clause 2 "Normative references" the following references shall be changed:
Delete
EN 288-2:1992, Specification and approval of welding procedures for metallic materials — Part 2: Welding
procedure specification for arc welding.
and replace with
"EN ISO 15609-1:2004, Specification and qualification of welding procedures for metallic materials — Welding
procedure specification — Part 1: Arc welding (ISO 15609-1:2004)"

Delete
EN 288-3:1992, Specification and approval of welding procedures for metallic materials — Part 3: Welding
procedure tests for the arc welding of steels.
and replace with
"EN ISO 15614-1:2004, Specification and qualification of welding procedures for metallic materials — Welding
procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-
1:2004)"

Delete
EN 288-6:1994, Specification and approval of welding procedures for metallic materials — Part 6: Approval
related to previous experience
and replace with
"EN ISO 15611:2003, Specification and qualification of welding procedures for metallic materials —
Qualification based on previous welding experience (ISO 15611:2003);
Delete
EN 288-7:1995, Specification and approval of welding procedures for metallic materials — Part 7: Approval by
a standard welding procedure for arc welding
and replace with
"EN ISO 15612:2004, Specification and qualification of welding procedures for metallic materials —
Qualification by adoption of a standard welding procedure (ISO 15612:2004)"

Delete
EN 288-8:1995, Specification and approval of welding procedures for metallic materials — Part 8: Approval by
a pre-production welding test
and replace with
"EN ISO 15613:2004, Specification and qualification of welding procedures for metallic materials —
Qualification based on pre-production welding test (ISO 15613:2004)"

In all cited places in the subsequent text of EN 13445-4 the above changes of references shall be performed
accordingly.
4

---------------------- Page: 6 ----------------------

SIST EN 13445-4:2002/A3:2009
EN 13445-4:2002/A3:2009 (E)
2 Modification of the text of the note to h in Table 5.4-3
1
The wording of the note to dimension h in Table 5.4-3 (see sub-clause 5.4.6) shall be modified to read:
1
"The length
...