SIST EN 61754-4:1997
(Main)Fibre optic connector interfaces -- Part 4: Type SC connector family
Fibre optic connector interfaces -- Part 4: Type SC connector family
Defines the standard interface dimensions for type SC family of connectors which is characterized by a 2,5 mm nominal ferrule diameter and includes a push-pull coupling mechanism which is spring loaded relative to the ferrule in the direction of the optical axis.
Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 4: Bauart SC Steckverbinderfamilie
Interfaces de connecteurs pour fibres optiques -- Partie 4: Famille de connecteurs du type SC
Définit les dimensions d'interfaces standard pour la famille de connecteurs de type SC caractérisée par une ferrule d'un diamètre nominal de 2,5 mm comportant un mécanisme de verrouillage pousser-tirer et une ferrule comprimée par un ressort dans la direction de l'axe optique.
Fibre optic connector interfaces - Part 4: Type SC connector family (IEC 61754-4:1997)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61754-4:1997
01-december-1997
Fibre optic connector interfaces - Part 4: Type SC connector family (IEC 61754-
4:1997)
Fibre optic connector interfaces -- Part 4: Type SC connector family
Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 4: Bauart SC
Steckverbinderfamilie
Interfaces de connecteurs pour fibres optiques -- Partie 4: Famille de connecteurs du
type SC
Ta slovenski standard je istoveten z: EN 61754-4:1997
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61754-4:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61754-4:1997
---------------------- Page: 2 ----------------------
SIST EN 61754-4:1997
EUROPEAN STANDARD
NORME EUROPEENNE
EUROPAISCHE NORM March 1997
ICS 33.lSO.ZO
Descriptors: Optic connector, type SC
English version
Fibre optic connector interfaces
Part 4: Type SC connector family
(IEC 61 754-4:1997)
Interface de connecteurs pour Lichtwellenleiter-
fibres optiques Steckverbinderiibergange
Partie 4: Farnille de connecteurs Teil 4: Typ SC, Steckverbinderfarnilie
type SC (IEC 61 754-4:1997)
(CEI 61 754-4:1997)
This European Standard was approved by CENELEC on 1997-03-1 1. CENELEC members are bound to
comply with the CENICENELEC Internal Regulations which stipulate the conditions for giv~ng this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
applicat~on to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French. German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland,
France. Germany. Greece. Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway. Portugal, Spain.
Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comitd Europden de Normalisation Electrotechnique
Europaisches Komitee fur Elektrotechnische Normung
tee+
Central Secretariat: rue de Stassart 35. B - 1050 Brussels
1997 CENELEC - All rights 01 e~ploilalion in any farm and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-4:1997 E
---------------------- Page: 3 ----------------------
SIST EN 61754-4:1997
Page 2
EN 61 754-4:1997
Foreword
The text of document 86B/882/FDIS, future edition 1 of IEC 61754-4. prepared by
SC 86B. Fibre optic interconnecting devices and passive components, of IEC TC 86. Fibre
optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 61 754-4 on 1997-03-1 1.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
latest date by which the national standards conflicting
with the EN have to be withdrawn
Endorsement notice
The text of the International Standard IEC 61754-4:1997 was approved by CENELEC as
a European Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 61754-4:1997
NORME CEI
INTERNATIONALE
IEC
61754-4
INTERNATIONAL
Première édition
STANDARD
First edition
1997-01
Interfaces de connecteurs pour fibres optiques –
Partie 4:
Famille de connecteurs du type SC
Fibre optic connector interfaces –
Part 4:
Type SC connector family
IEC 1997 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni utilisée No part of this publication may be reproduced or utilized in
sous quelque forme que ce soit et par aucun procédé, électronique any form or by any means, electronic or mechanical, including
ou mécanique, y compris la photocopie et les microfilms, sans photocopying and microfilm, without permission in writing from
l'accord écrit de l'éditeur. the publisher
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 IEC web site http: //www.iec.ch
e-mail: inmail@iec.ch
CODE PRIX
Commission Electrotechnique Internationale
K
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 5 ----------------------
SIST EN 61754-4:1997
61754-4 © IEC:1997 – 3 –
CONTENTS
Page
FOREWORD . 5
Clause
1 Scope . 7
2 Description . 7
3 Interfaces . 7
Figures and tables. 9 to 19
---------------------- Page: 6 ----------------------
SIST EN 61754-4:1997
61754-4 © IEC:1997 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_________
FIBRE OPTIC CONNECTOR INTERFACES −
Part 4: Type SC connector family
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordan
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.