SIST EN 13938-4:2004
(Main)Explosives for civil uses - Propellants and rocket propellants - Part 4: Determination of burning rate under ambient conditions
Explosives for civil uses - Propellants and rocket propellants - Part 4: Determination of burning rate under ambient conditions
This European Standard describes a method for the determination of burning rate under ambient conditions for propellants and black powders.
It is applicable to propellants and black powders in their original form up to a grain size of 8 mm.
Explosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 4: Bestimmung der Brenngeschwindigkeit bei Umgebungsbedingungen
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Brenngeschwindigkeit bei Umgebungsbedingungen für Treibladungspulver und Schwarzpulver fest.
Es ist für Treibladungspulver und Schwarzpulver in Originalform bis zu einer Korngröße von 8 mm anzuwenden.
Explosifs a usage civil - Poudres propulsives et propergols pour fusées - Partie 4: Détermination de la vitesse de combustion dans les conditions ambiantes
Eksplozivi za civilno uporabo - Smodniki in raketna goriva – 4. del: Ugotavljanje hitrosti gorenja v normalnih razmerah
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosives for civil uses - Propellants and rocket propellants - Part 4: Determination of burning rate under ambient conditionsEksplozivi za civilno uporabo - Smodniki in raketna goriva – 4. del: Ugotavljanje hitrosti gorenja v normalnih razmerahExplosifs a usage civil - Poudres propulsives et propergols pour fusées - Partie 4: Détermination de la vitesse de combustion dans les conditions ambiantesExplosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 4: Bestimmung der Brenngeschwindigkeit bei UmgebungsbedingungenTa slovenski standard je istoveten z:EN 13938-4:2003SIST EN 13938-4:2004en71.100.30ICS:SLOVENSKI
STANDARDSIST EN 13938-4:200401-februar-2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13938-4December 2003ICS 71.100.30English versionExplosives for civil uses - Propellants and rocket propellants -Part 4: Determination of burning rate under ambient conditionsExplosifs à usage civil - Poudres propulsives et propergolspour fusées - Partie 4: Détermination de la vitesse decombustion dans les conditions ambiantesExplosivstoffe für zivile Zwecke - Treibladungspulver undRaketentreibstoffe - Teil 4: Bestimmung derBrenngeschwindigkeit bei UmgebungsbedingungenThis European Standard was approved by CEN on 1 October 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13938-4:2003 E
EN 13938-4:2003 (E)2ContentspageForeword.31Scope.32Normative references.33Terms and definitions.44Principle.45Apparatus.46Preparation of test sample.57Procedure.58Expression of results.69Test report.6Annex A (informative)
Range of applicability of the test method.7Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.8
EN 13938-4:2003 (E)3ForewordThis document EN 13938-4:2003 has been prepared by Technical Committee CEN /TC 321, "Explosives for civiluses", the secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn at the latest byJune 2004.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.This European Standard is one of a series of standards with the generic title “Explosives for civil uses – Propellantsand rocket propellants”. The other parts of this series are listed below:prEN 13938-1Part 1: Requirements.prEN 13938-2Part 2: Determination of resistance to electrostatic energy.EN 13938-3Part 3: Determination of deflagration to detonation transition.prEN 13938-5Part 5: Solid rocket propellants. Determination of voids and fissures.prEN 13938-6Part 6: Solid rocket propellants. Guide for the deter
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.