iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 300 911 V8.4.1:2003

(Main)

Digital cellular telecommunications system (Phase 2+) (GSM); Radio subsystem link control (GSM 05.08 version 8.4.1 Release 1999)

Digital cellular telecommunications system (Phase 2+) (GSM); Radio subsystem link control (GSM 05.08 version 8.4.1 Release 1999)

05.08; s31b; CR: A242; R99; 8.3.1; 8.4.0; Inter System Handover and Cell re-selection 05.08; s31b; CR: A248; R99; 8.3.1; 8.4.0; Removal of parameter CELL_RESELECT_PARAM_IND 05.08; s31b; CR: A270; R99; 8.3.1; 8.4.0; Procedures for inter-system handover (cdma2000) 05.08; s31b; CR: A252; R99; 8.3.1; 8.4.0; Correction to mapping of interference levels 05.08; s31b; CR: A253; R99; 8.3.1; 8.4.0; Clarification on Abnormal Cell Reselection 05.08; s31b; CR: A269; R99; 8.3.1; 8.4.0; System Information refreshing in idle mode 05.08; s31b; CR: A271; R99; 8.3.1; 8.4.0; MS behaviour under network controlled cell reselection 05.08; s31b; CR: A272; R99; 8.3.1; 8.4.0; Cell selection parameter acquisition in Packet Transfer mode 05.08; s31b; CR: A273; R99; 8.3.1; 8.4.0; BTS Output Power 05.08; s31b; CR: A274; R99; 8.3.1; 8.4.0; Default value for GPRS_MS_TXPWR_MAX_CCH  at cell re-selection 05.08; s31b; CR: A249; R99; 8.3.1; 8.4.0; Clarification of Cell Bar Qualify 2 parameter 05.08; s31b; CR: A266; R99; 8.3.1; 8.4.0; Fast inband signalling: E-IACCH 05.08; s31b; CR: A268; R99; 8.3.1; 8.4.0; EGPRS Link Quality measurements

Digitalni celični telekomunikacijski sistem (faza 2+) – Krmiljenje povezave radijskega podsistema (GSM 05.08, različica 8.4.1, izdaja 1999)

General Information

Status
Published
Publication Date
30-Nov-2003
ICS
33.070.50 - Global System for Mobile Communication (GSM)
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003
Ref Project
ETSI EN 300 911 V8.4.1 (2000-10) - Digital cellular telecommunications system (Phase 2+) (GSM); Radio subsystem link control (GSM 05.08 version 8.4.1 Release 1999)

Buy Standard

EN 300 911 V8.4.1:2003EN 300 911 V8.4.1:2003
PreviousNext
Standard
EN 300 911 V8.4.1:2003
English language
93 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital cellular telecommunications system (Phase 2+) (GSM); Radio subsystem link control (GSM 05.08 version 8.4.1 Release 1999)33.070.50Globalni sistem za mobilno telekomunikacijo (GSM)Global System for Mobile Communication (GSM)ICS:Ta slovenski standard je istoveten z:EN 300 911 Version 8.4.1SIST EN 300 911 V8.4.1:2003en01-december-2003SIST EN 300 911 V8.4.1:2003SLOVENSKI
STANDARD



SIST EN 300 911 V8.4.1:2003



ETSIEN300911V8.4.1(2000-10)EuropeanStandard(Telecommunicationsseries)Digitalcellulartelecommunicationssystem(Phase2+);Radiosubsystemlinkcontrol(GSM05.08version8.4.1Release1999)GLOBALSYSTEMFORMOBILECOMMUNICATIONSRSIST EN 300 911 V8.4.1:2003



ETSIETSIEN300911V8.4.1(2000-10)2(GSM05.08version8.4.1Release1999)ReferenceREN/SMG-020508Q8R1KeywordsDigitalcellulartelecommunicationssystem,GlobalSystemforMobilecommunications(GSM)ETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 911 V8.4.1:2003



ETSIETSIEN300911V8.4.1(2000-10)3(GSM05.08version8.4.1Release1999)ContentsIntellectualPropertyRights.7Foreword.71Scope.81.1References.81.2Abbreviations.92General.93Handover.113.1Overallprocess.113.2MSmeasurementprocedure.113.3BSSmeasurementprocedure.113.4Strategy.114RFpowercontrol.124.1Overallprocess.124.2MSimplementation.124.3MSpowercontrolrange.124.4BSSimplementation.134.5BSSpowercontrolrange.134.6Strategy.134.7Timing.134.8Dedicatedchannelsusedforavoicegroupcallorvoicebroadcast.145Radiolinkfailure.145.1Criterion.145.2MSprocedure.155.3BSSprocedure.156Idlemodetasks.156.1Introduction.156.2Measurementsfornormalcellselection.166.3Measurementsforstoredlistcellselection.166.4Criteriaforcellselectionandreselection.176.5Downlinksignallingfailure.186.6MeasurementsforCellReselection.196.6.1MonitoringofreceivedsignallevelandBCCHdata.196.6.2Pathlosscriteriaandtimingsforcellre-selection.206.6.3CellreselectionalgorithmforSoLSA.216.6.4Algorithmforcellre-selectionfromGSMtoUTRAN.216.7ReleaseofTCHandSDCCH.226.7.1Normalcase.226.7.2Callre-establishment.226.8Abnormalcasesandemergencycalls.237Networkpre-requisites.237.1BCCHcarriers.237.2IdentificationofsurroundingBSSforhandovermeasurements.248Radiolinkmeasurements.258.1Signallevel.268.1.1General.268.1.2Physicalparameter.268.1.3Statisticalparameters.278.1.4Rangeofparameter.278.1.5Measurementquantityforotherradioaccesstechnologies.278.1.5.1UTRANFDD.278.1.5.2UTRANTDD.28SIST EN 300 911 V8.4.1:2003



ETSIETSIEN300911V8.4.1(2000-10)4(GSM05.08version8.4.1Release1999)8.1.5.3cdma2000.288.2Signalquality.288.2.1General.288.2.2Physicalparameter.288.2.3Statisticalparameters.288.2.4Rangeofparameter.298.2.4.1RangeofparametersforEGPRS.308.3Aspectsofdiscontinuoustransmission(DTX).338.4Measurementreporting.338.4.1MeasurementreportingfortheMSonaTCH.338.4.1.1MeasurementreportingfortheMSonanE-TCHinFPCmode.348.4.2MeasurementreportingfortheMSonaSDCCH.358.4.3AdditionalcellreportingrequirementsformultibandMS.358.4.4CommonaspectsfortheMSonaTCHoraSDCCH.368.4.5MeasurementreportingfortheBSS.368.4.6Extendedmeasurementreporting.368.4.7AdditionalcellreportingrequirementsformultimodeMS.378.4.8EnhancedMeasurementReporting.378.4.8.1ReportingPriority.378.4.8.2MeasurementReporting.388.5AbsoluteMS-BTSdistance.398.5.1General.398.5.2Physicalparameter.399Controlparameters.4010GPRSmodetasks.4210.1CellRe-selection.4210.1.1MonitoringthereceivedsignallevelandPBCCHdata.4310.1.1.1Packetidlemode.4310.1.1.2Packettransfermode.4410.1.2CellRe-selectionCriteria.4510.1.3CellRe-selectionAlgorithm.4610.1.3.1Abnormalcellreselection.4710.1.3.1aAlgorithmforcellre-selectionfromGSMtoUTRAN.4710.1.4NetworkcontrolledCellre-selection.4810.1.4.1Measurementreporting.4810.1.4.2Cellre-selectioncommand.4910.1.4.3Exceptionalcases.4910.1.5ExtendedMeasurementreporting.5010.2RFPowerControl.5110.2.1MSoutputpower.5110.2.2BTSoutputpower.5210.2.3MeasurementsatMSside.5310.2.3.1DerivingtheCvalue.5310.2.3.1.1Packetidlemode.5310.2.3.1.2Packettransfermode.5410.2.3.2DerivationofChannelQualityReport.5510.2.3.2.1Packettransfermode.5510.2.3.2.2Packetidlemode.5810.2.3.2.3Measurementreporting.5910.2.4MeasurementsatBSSside.5910.3Measurementrequirements.5910.4Controlparameters.6011CTSmodetasks.6211.1CTSidlemodetasks.6211.1.1CTScellselection.6211.1.1.1SynchronizationandmeasurementsforCTScellselection.6211.1.1.2InitialsychronizationofCTS-MS.6211.1.2CriterionforCTScellselection.6311.1.3MonitoringofCTSBCHandCTSPCH.6311.1.3.1Monitoringofreceivedsignallevel.63SIST EN 300 911 V8.4.1:2003



ETSIETSIEN300911V8.4.1(2000-10)5(GSM05.08version8.4.1Release1999)11.1.3.2Downlinkbeaconfailure.6311.1.3.3Downlinkpagingfailure.6311.1.4ProcedureswithreportingtotheCTS-FP.6411.1.4.1AFAmonitoring.6411.1.4.2BCCHdetection.6411.1.4.3ObservedFrequencyOffset(OFO)measurement.6411.2Intra-cellhandover.6511.2.1Overallprocess.6511.2.2CTS-MSmeasurementprocedure.6511.2.3CTS-FPmeasurementprocedure.6511.2.4Strategy.6511.3RFpowercontrol.6511.3.1Overallprocess.6511.3.2CTS-MSimplementation.6511.3.3CTS-MSpowercontrolrange.6611.3.4CTS-FPimplementation.6611.3.5CTS-FPpowercontrolrange.6611.3.6Strategy.6611.3.7Timing.6611.4Radiolinkfailure.6711.4.1Criterion.6711.4.2CTS-MSprocedure.6711.4.3CTS-FPprocedure.6711.5Radiolinkmeasurements.6711.5.1Signalstrength.6711.5.1.1General.6711.5.1.2Physicalparameter.6811.5.1.3Statisticalparameters.6811.5.1.4Rangeofparameter.6811.5.2Signalquality.6811.5.2.1General.6811.5.2.2Physicalparameter.6811.5.2.3Statisticalparameters.6811.5.2.4Rangeofparameter.6811.5.3Aspectsofdiscontinuoustransmission(DTX).6811.5.4MeasurementreportingfortheCTS-MSonaTCH.6811.6ControlofCTS-FPservicerange.6911.7Controlparameters.6912COMPACTModeTasks.7112.1Introduction.7112.2NetworkPre-requisites.7112.2.1CPBCCHcarriers.7112.3COMPACTIdleModeTasks.7112.3.1Introduction.7112.3.2MeasurementsforCOMPACTCellSelection.7112.3.3MeasurementsforCOMPACTStoredListCellSelection.7212.3.4CriteriaforCOMPACTCellSelection.7212.3.5DownlinkSignallingFailure.7212.4COMPACTCellReselection.7212.4.1MonitoringthereceivedsignallevelandCPBCCHdata.7312.4.1.1Packetidlemode.7312.4.1.2Packettransfermode.7312.4.2COMPACTcellreselectioncriteria.7412.4.3COMPACTcellreselectionalgorithm.7412.4.4NetworkcontrolledCellreselection.7412.4.5COMPACTcellreselectionmeasurementopportunities.74SIST EN 300 911 V8.4.1:2003



ETSIETSIEN300911V8.4.1(2000-10)6(GSM05.08version8.4.1Release1999)AnnexA(informative):DefinitionofabasicGSMorDCS1800handoverandRFpowercontrolalgorithm.75A.1Scope.75A.2Functionalrequirement.75A.3BSSpre-processingandthresholdcomparisons.76A.3.1Measurementaveragingprocess.76A.3.2Thresholdcomparisonprocess.77A.3.2.1RFpowercontrolprocess.77A.3.2.2HandoverProcess.78A.4BSSdecisionalgorithm.79A.4.1Internalintracellhandoveraccordingtoradiocriteria:(Interferenceproblems).80A.4.2Internalhandoveraccordingtoothercriteria.80A.4.3Generalconsiderations.80A.5Channelallocation.80A.6HandoverdecisionalgorithmintheMSC.81AnnexB(informative):PowerControlProcedures.83B.1Openloopcontrol.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 301 489-7 V1.3.1:2006(Main)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)
ETSI EN 301 489-7 V1.3.1 (2005-06)

The present document, together with EN 301 489-1 [1], covers the assessment of radio equipment meeting Phase 1, Phase 2, and Phase 2+ GSM and DCS digital cellular mobile and portable radio equipment transmitting and receiving speech and/or data, and operating in digital cellular radio telecommunications systems, and associated ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for Phase 1, Phase 2, and Phase 2+ GSM and DCS digital cellular mobile and portable radio equipment, transmitting and receiving speech and/or data, and associated ancillary equipment. Examples of digital cellular mobile and portable radio equipment covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. Base station equipment (BTS and BSS) operating within network infrastructure is outside the scope of the present document. However, the present document does cover mobile and portable equipment that is intended to be operated in a fixed location while connected to the AC mains (see clause 5.5). The environment classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 515 V2.3.0:2006(Main)
Global System for Mobile communication (GSM); Requirements for GSM operation on railways
ETSI EN 301 515 V2.3.0 (2005-02)

The present document identifies the 3GPP Technical Specifications which contain provisions relating to the use of GSM for application on railway networks. The present document is applicable to GSM communication systems embraced by the European Council Directives 96/48/EC [1] and 2001/16/EC [2] on the interoperability of the trans-European high-speed and conventional rail system.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ETS 300 961 E3:2003(Main)
Digital cellular telecommunications system (Phase 2+) (GSM); Full rate speech; Transcoding (GSM 06.10 version 5.2.1 Release 1996)
ETSI ETS 300 961 ed.3 (2000-12)

CRs from SMG#32

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ETS 300 522 E3:2003(Main)
Digital cellular telecommunications system (Phase 2) (GSM); Network architecture (GSM 03.02)
ETSI ETS 300 522 ed.3 (1996-11)

TThe purpose of this third edition European Telecommunication Standard (ETS) is to present the possible architectures of the mobile system. Clause 3 of this ETS contains a definition of the different functional entities needed to support the mobile service. In clause 4, the confi guration of a PLMN is described as well as the organization of the fun ctional entities; the configuration presented is the most general in o rder to cope with all the possible implementations which can be imagin ed in the different countries. To illustrate that purpose, some exampl es of possible configurations are presented. Clause 5 of this ETS cont ains a brief description of the interfaces involved which shows the pr inciple of the organization considered.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ETS 300 967 E1:2003(Main)
Digital cellular telecommunications system; Half rate speech; ANSI-C code for the GSM half rate speech codec (GSM 06.06 version 5.0.1)
ETSI ETS 300 967 ed.1 (1997-05)

This European Telecommunication Standard (ETS) contains an electronic copy of the ANSI-C code for the GSM half rate codec. The ANSI-C code i s necessary for a bit exact implementation of the half rate speech tra nscoder (GSM 06.20 (ETS 300 969) [2]), Voice Activity Detector (GSM 06 .42 (ETS 300 973) [6]), comfort noise (GSM 06.22 (ETS 300 971) [4]), D iscontinuous Transmission (GSM 06.41 (ETS 300 972) [5]) and example so lutions for substituting and muting of lost frames (GSM 06.21 (ETS 300 970) [3])

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 409 V7.0.3:2003(Main)
Digital cellular telecommunications system (Phase 2+) (GSM); Specification of the Cordless Telephony System Subscriber Identity Module for both Fixed Part and Mobile Station (GSM 11.19 version 7.0.3 Release 1998)
ETSI EN 302 409 V7.0.3 (2000-08)

The present document defines the aspects of the internal organization of the FP-SIM which are related to the CTS initialization and CTS enrolment operation phase of CTS as well as the files contained in the SIM for dedicated CTS operation . This is to ensure interoperability between a FP-SIM and a CTS-FPE independently of the respective manufacturers and operators. The present document defines: -the contents of the files required for the CTS application; -the application protocol. All information regarding the interface between the Fixed Part Subscriber Identity Module (FP-SIM) and the Cordless Telephony System Fixed Part Equipment (CTS-FPE) mentioned below are fully compliant with the TS-GSM11.11 [12] unless otherwise stated in this present document.  -the requirements for the physical characteristics of the FP-SIM, the electrical signals and the transmission protocols; -the model which shall be used as a basis for the design of the logical structure of the FP-SIM; -the security features; -the interface functions; -the commands.  For more details regarding CTS, refer to specifications GSM 02.56 [3]and GSM 03.56 [6].  The present document does not specify any aspects related to the administrative management phase. Any internal technical reallocation of either the FP-SIM or the CTS-FPE are only specified where these reflect over the interface. It does not specify any of the security algorithms which may be used.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ETS 300 500/A1 E1:2003(Amendment)
European digital cellular telecommunications system (Phase 2); Principles of telecommunication services supported by a GSM Public Land Mobile Network (PLMN) (GSM 02.01)
ETSI ETS 300 500/A1 ed.1 (1995-03)

REASON: Amendment 1 to ETS 300 500 due to a potential contradiction between GSM 02.01 and GSM 02.03 related to the negotiation from TS61 to TS62. Currnetly, if a TS61 call setup cannot be supported then it shall be negotiated to TS62. However, before this can be done a subscription check must be completed which, according to GSM 02.01, will fail. CONSEQUNCES OF NON-ACCEPTANCE: If this change is not accepted, then a subscription check for TS61 will cause the call to fail despite the fact that the call has a good chance of being sucessfully completed.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 113 V6.1.1:2003(Main)
Digital cellular telecommunications system (Phase 2+) (GSM); General Packet Radio Service (GPRS); Service description; Stage 1 (GSM 02.60 version 6.1.1)
ETSI EN 301 113 V6.1.1 (1998-11)

SUBJECT Allowing re-negotiation of the QoS parameters for throughput during a session improves the flexibility of network operation and increases the quality of service perceived by the user. Requirement for the MS to inform the network of its GPRS class is not appropriate for the stage 1 and should be left for the stage 2 to determine. The three MS classes A, B, C remain unchanged. Clarification of the GPRS Attach characteristics. A GPRS-Attach shall be succesfully performed only if the subscriber has a valid GPRS subscription.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ETS 300 581-3 E1:2003(Main)
European digital cellular telecommunications system; Half rate speech; Part 3: Substitution and muting of lost frames for half rate speech traffic channels (GSM 06.21)
ETSI ETS 300 581-3 ed.1 (1995-12)

.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ETS 300 560 E2:2003(Main)
Digital cellular telecommunications system (Phase 2) (GSM); Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interface (GSM 04.12)
ETSI ETS 300 560 ed.2 (1996-01)

....

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day