SIST EN 61300-2-44:2005

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-44: Tests - Flexing of the strain relief of fibre optic devices

Details a test to ensure that the captivation or attachment of a cable to a fibre optic device will withstand a flexing in one plane motion under tensile load of the sort likely to be applied during normal use. This test can be applied to single fibre cables and multiple fibre cables.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren -- Teil 2-44: Prüfungen - Biegen der Zugentlastung von Lichtwellenleiterbauteilen

Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures fondamentales d'essais et de mesures -- Partie 2-44: Essais - Flexion du serre-câble des dispositifs à fibres optiques

Décrit un essai pour s'assurer que le point de capture ou de fixation d'un câble au dispositif à fibres optiques résistera à une flexion lors d'un mouvement plan sous une charge de traction de la sorte susceptible d'être appliquée pendant un usage normal. L'essai peut s'appliquer sur des câbles à fibre unique et des câbles à fibres multiples.

Povezovalne naprave in pasivne komponente optičnih vlaken – Postopki osnovnega preskušanja in merjenja – 2-44. del: Preskusi – Spreminjanje natezne obremenitve povezovanja naprav z optičnimi vlakni (IEC 61300-2-44:2004)

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-2005
• Withdrawal Date: 18-Nov-2008
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 18-Nov-2008
• Due Date: 11-Dec-2008
• Completion Date: 19-Nov-2008
• Ref Project: EN 61300-2-44:2005 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices

Relations

• Replaced By: SIST EN 61300-2-44:2009 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices (IEC 61300-2-44:2008)
• Effective Date: 13-May-2010
• Replaced By: SIST EN 61300-2-44:2009 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices (IEC 61300-2-44:2008)
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN 61300-2-44:2009 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices (IEC 61300-2-44:2008)
• Effective Date: 01-Jan-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-44:2005
01-november-2005
3RYH]RYDOQHQDSUDYHLQSDVLYQHNRPSRQHQWHRSWLþQLKYODNHQ±3RVWRSNL
RVQRYQHJDSUHVNXãDQMDLQPHUMHQMD±GHO3UHVNXVL±6SUHPLQMDQMHQDWH]QH
REUHPHQLWYHSRYH]RYDQMDQDSUDY]RSWLþQLPLYODNQL,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 2-44: Tests - Flexing of the strain relief of fibre optic
devices
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren -- Teil 2-44: Prüfungen - Biegen der Zugentlastung von
Lichtwellenleiterbauteilen
Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures
fondamentales d'essais et de mesures -- Partie 2-44: Essais - Flexion du serre-câble des
dispositifs à fibres optiques
Ta slovenski standard je istoveten z: EN 61300-2-44:2005
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-44:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-2-44:2005

---------------------- Page: 2 ----------------------

SIST EN 61300-2-44:2005
EUROPEAN STANDARD EN 61300-2-44
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2005

ICS 33.180.20


English version


Fibre optic interconnecting devices and passive components –
Basic test and measurement procedures
Part 2-44: Tests –
Flexing of the strain relief of fibre optic devices
(IEC 61300-2-44:2004)


Dispositifs d'interconnexion  Lichtwellenleiter –
et composants passifs à fibres optiques - Verbindungselemente und passive
Procédures fondamentales d'essais Bauteile –
et de mesures Grundlegende Prüf- und Messverfahren
Partie 2-44: Essais – Teil 2-44: Prüfungen –
Flexion du serre-câble des dispositifs Biegen der Zugentlastung
à fibres optiques von Lichtwellenleiterbauteilen
(CEI 61300-2-44:2004) (IEC 61300-2-44:2004)


This European Standard was approved by CENELEC on 2005-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61300-2-44:2005 E

---------------------- Page: 3 ----------------------

SIST EN 61300-2-44:2005
EN 61300-2-44:2005 - 2 -
Foreword
The text of document 86B/1994/FDIS, future edition 1 of IEC 61300-2-44, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-44 on 2005-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-44:2004 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61300-2-44:2005
- 3 - EN 61300-2-44:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 2003
passive components - Basic test and
measurement procedures
Part 1: General and guidance

1) 2)
IEC 61300-3-1 - Part 3-1: Examinations and EN 61300-3-1 1997
measurements - Visual examination

1) 2)
IEC 61300-3-3 - Part 3-3: Examinations and EN 61300-3-3 2003
measurements - Active monitoring of
changes in attenuation and return loss

1) 2)
IEC 61300-3-4 - Part 3-4: Examinations and EN 61300-3-4 2001
measurements - Attenuation




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 61300-2-44:2005

---------------------- Page: 6 ----------------------

SIST EN 61300-2-44:2005
NORME CEI
INTERNATIONALE
IEC



61300-2-44
INTERNATIONAL


Première édition
STANDARD

First edition

2004-10


Dispositifs d'interconnexion et
composants passifs à fibres optiques –
Procédures fondamentales d'essais
et de mesures –
Partie 2-44:
Essais – Flexion du serre-câble
des dispositifs à fibres optiques

Fibre optic interconnecting devices
and passive components –
Basic test and measurement procedures –
Part 2-44:
Tests – Flexing of the strain relief
of fibre optic devices

 IEC 2004 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
H
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 61300-2-44:2005
61300-2-44  IEC:2004 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 2-44: Tests – Flexing of the strain relief
of fibre optic devices


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum
...