iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1058:1996

(Main)

Wood-based panels - Determination of characteristics values of mechanical properties and density

Wood-based panels - Determination of characteristics values of mechanical properties and density

This European Standard specifies methods of calculation for determining characteristic values of mechanical properties and density for defined populations of wood-based panels for structural purposes.

Holzwerkstoffe - Bestimmung der charakteristischen Werte der mechanischen Eigenschaften und der Rohdichte

Diese Europäische Norm legt Berechnungsverfahren zur Bestimmung der charakteristischen Werte der mechanischen Eigenschaften und der Rohdichte für definierte Grundgesamtheiten von Holzwerkstoffplatten für tragende Zwecke fest.

Panneaux a base de bois - Détermination des valeurs caractéristiques des propriétés mécaniques et de la masse volumique

Cette norme européenne spécifie les méthodes de calcul permettant de déterminer les valeurs caractéristiques des propriétés mécaniques et la masse volumique pour des populations définies de panneaux a base de bois pour la construction.

Lesne plošče - Ugotavljanje karakterističnih vrednosti mehanskih lastnosti in gostote

General Information

Status
Withdrawn
Publication Date
31-Jul-1996
Withdrawal Date
02-Feb-2010
ICS
79.060.01 - Wood-based panels in general
Technical Committee
LLZ - Les, lesni izdelki in zaščita lesa
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Nov-2009
Due Date
10-Dec-2009
Completion Date
03-Feb-2010
Directive
89/106/EEC - Construction products
Mandate
M/112 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural timber products
Ref Project
EN 1058:1995 - Wood-based panels - Determination of characteristics values of mechanical properties and density

Relations

Replaced By
SIST EN 1058:2010 - Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values
Effective Date
01-Apr-2010
Replaced By
SIST EN 1058:2010 - Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values
Effective Date
08-Jun-2022

Buy Standard

EN 1058:1996EN 1058:1996
PreviousNext
Standard
EN 1058:1996
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.JRVWRWHHolzwerkstoffe - Bestimmung der charakteristischen Werte der mechanischen Eigenschaften und der RohdichtePanneaux a base de bois - Détermination des valeurs caractéristiques des propriétés mécaniques et de la masse volumiqueWood-based panels - Determination of characteristics
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 113-3:2023(Main)
Durability of wood and wood-based products - Test method against wood destroying basidiomycetes - Part 3: Assessment of durability of wood-based panels
EN 113-3:2023

This European Standard describes a method for assessing the resistance of wood-based panel products to attack by wood-destroying basidiomycete fungi growing in pure culture.
The method is applicable to uncoated, rigid wood-based panel products. It is applicable to the determination of the decay resistance of wood-based panel products:
— made from naturally durable materials;
— made from materials treated with preservatives prior to manufacture;
— treated with a preservative which is introduced during manufacture, for example as an additive to the adhesive;
— treated with preservative after manufacture.
NOTE 1 This method can be used in conjunction with an appropriate ageing procedure, for example EN 73 or EN 84.
NOTE 2 Wood-based panel products that have received a preservative treatment after manufacture can be susceptible to attack through the cut edges of the test specimens and the decay resistance indicated can be less than that of complete panels used in service.
Annex A (informative) contains a guidance on sampling.
Annex B (normative) contains some methods of sterilization.
Annex C (informative) contains information on the culture vessels.
Annex D (informative) contains an example of a test report.
Annex E (informative) contains information on the test fungi.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14322:2022(Main)
Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification
EN 14322:2021

This document specifies the surface requirements and dimensional tolerances for decorative melamine faced boards for interior use which are common for particleboards, extruded particleboards fibreboards and sandwich boards for furniture.
This document does not apply to boards laminated with so called priming foils or finish foils and laminates according to EN 438 1.
This document does not apply to laminate floor coverings.
Melamine faced wood-based boards in accordance with this document can be referred to as MFB.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14323:2022(Main)
Wood-based panels - Melamine faced boards for interior uses - Test methods
EN 14323:2021

This document specifies test methods for the determination of characteristics of melamine faced boards (MFB) as defined in EN 14322.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12460-3:2020(Main)
Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)
EN ISO 12460-3:2020

This document specifies a procedure for determination of accelerated formaldehyde release from
uncoated and coated wood-based panels using the gas analysis method. The procedure is also suitable
for the testing of other materials (e.g. edge bands, floor coverings, foams, foils, laminated wood
products, veneered wood products, coated wood products).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12460-4:2016(Main)
Wood-based panels - Determination of formaldehyde release - Part 4: Desiccator method (ISO 12460-4:2016)
EN ISO 12460-4:2016

This part of ISO 12460 specifies a desiccator method for the determination of the quantity of formaldehyde
emitted from particleboard, fibreboard, plywood, oriented strand board (OSB), and wooden laminated flooring.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12460-5:2016(Main)
Wood-based panels - Determination of formaldehyde release - Part 5: Extraction method (called the perforator method) (ISO 12460-5:2015)
EN ISO 12460-5:2015

This document specifies an extraction method called the perforator method, to determine the formaldehyde content of unlaminated and uncoated wood-based panels.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16718:2016(Main)
Wood and wood based products - Dosage of the total organic carbon (TOC) in wood and wood based products
EN 16718:2015

This document describes a method for determining total organic carbon by calculating the difference between the results of measurements of total carbon (TC) and total inorganic carbon (TIC). The identification of the bio-based content given by the stable isotopes such as 13C is described also.
This method is applicable to all wood species, wood-based materials (panels, plywood, wood-polymer, etc.) and woods containing chemicals in general.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13986:2005+A1:2015(Main)
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 13986:2004+A1:2015

This document defines wood-based panels for use in construction and specifies the relevant characteristics and the appropriate test methods to determine these characteristics for wood-based panels, unfaced, overlaid, veneered or coated:
-   for internal use as structural components in dry conditions ) ;
-   for internal (or protected external) use as structural components in humid conditions ) ;
-   for external use as structural components ) ;
-   for internal use as non-structural components in dry conditions1);
-   for internal (or protected external) uses as non structural components in humid conditions2);
-   for external use as non-structural components3);
-   for use as structural floor decking on joists in dry1) or humid2) or external3) conditions;
-   for use as structural roof decking on joists in dry1) or humid2) or external3) conditions;
-   for use as structural wall sheathing on studs in dry1) or humid2) or external3) conditions.
   It provides for the evaluation of conformity and the requirements for marking these products.
This document covers wood-based panels in the form of solid wood panels, LVL ) , plywood, OSB, particleboards (chipboards) either resin- or cement-bonded, wet process fibreboards (hardboards, medium boards, softboards) and dry process fibreboards (MDF) for use in construction. They may contain chemical agents to improve their reaction to fire and their resistance to biological attack, e.g. by fungi and insects.
This document is not intended to be applicable to wood-based panels for use in non-constructional applications.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    68 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12872:2015(Main)
Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs
CEN/TR 12872:2014

This Technical Report gives guidance on the use of wood-based panels in structural applications as structural floor and roof decking on joists or structural wall sheathing on studs in accordance with EN 12871. It provides information on:
—   inspection at site;
—   transport and delivery;
—   handling;
—   stacking;
—   storage;
—   moisture content, conditioning and the effects of moisture;
—   cutting and machining;
—   selection;
—   installation.

  • Technical report
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 326-2:2011+A1:2014(Main)
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
EN 326-2:2010+A1:2014

EN 326-2+A1 specifies methods for internal initial type testing (ITT) and internal factory production control (FPC) as well as external control of wood-based panels for their compliance with EN 13986 and other relevant product specifications. However, it may also apply, at the option of the manufacturer, to wood-based panels applied for non-construction purposes. This European Standard is not applicable for the assessment of compliance with specifications of panels comprised in consignments. In such cases, EN 326-3 applies. For internal factory production control, if required, methods for the assessment of conformity of batches and of production over longer periods are given. For external control, if required, methods for the initial inspection of a factory and initial type testing of a product, and for the surveillance of the factory production control, are given. In the factory production control small test pieces are used. The statistics of evaluation is based on normal distribution.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day