SIST EN IEC 62271-200:2021

High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-200:2021)

This part of IEC 62271 is applicable to prefabricated metal-enclosed switchgear and controlgear
assemblies designed for:
– alternating current;
– rated voltages above 1 kV and up to and including 52 kV;
– service frequencies up to and including 60 Hz;
– indoor and outdoor installation.
The assembly can include air-insulated and/or fluid-filled compartments.
For components installed in a metal-enclosed switchgear and controlgear, this document
supplements or even replaces in some cases, the requirements as stated by the individual
product standards.
The list of components which can be inside the metal-enclosed switchgear and controlgear is
not limited to the ones explicitly cited in this document.

Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 200: Metallgekapselte Wechselstrom-Schaltanlagen für Bemessungsspannungen über 1 kV bis einschließlich 52 kV (IEC 62271-200:2021)

Appareillage à haute tension - Partie 200: Appareillage sous enveloppe métallique pour courant alternatif de tensions assignées supérieures à 1 kV et inférieures ou égales à 52 kV (IEC 62271-200:2021)

L’IEC 62271-200:2021 est applicable aux ensembles d'appareillages préfabriqués sous enveloppe métallique conçus pour:
- le courant alternative;
- des tensions assignées supérieures à 1 kV et inférieures ou égales à 52 kV;
- des fréquences de service jusqu’à 60 Hz inclus;
- une installation à l'intérieur et à l'extérieur.
L’ensemble peut comprendre des compartiments isolés dans l’air et/ou remplis de fluide.
Cette troisième édition annule et remplace la deuxième édition publiée en 2011. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) numérotation des articles alignée sur l’IEC 62271‑1:2017, y compris l'adoption des noms des paragraphes de l’Article 3;
b) des définitions spécifiques sont ajoutées à l'Article 3 pour "en service", "condition normale de fonctionnement" et "utilisation normale";
c) l'essai d'arc interne sur les appareillages montés sur poteau est exclu du présent document, car il est maintenant couvert par la norme spécifique IEC 62271‑214:2019;
d) une description plus exacte du circuit de terre est donnée avec l'inclusion des valeurs assignées et des exigences d'essai;
e) réduction du nombre d'essais mécaniques sur les verrouillages pour les essais de type; meilleure description des forces à appliquer lors des essais de type (voir 7.102);
f) le mesurage de la résistance sur le circuit principal n'est nécessaire qu'avant les essais au courant permanent (comme référence pour les essais individuels de série) et n'est plus nécessaire après cet essai au courant permanent. La raison de cette suppression est que cette résistance mesurée ne signifie rien; comme l'essai d’échauffement vient de se terminer, un nouvel essai d’échauffement n’apporterait pas de nouvelles informations;
g) l’IEC 62271-100:2021, l’IEC 62271-103:2021, l’IEC 62271-105:2021 et l’IEC 62271‑106:2021 sont citées dans le present document;
h) l’IEC 62271‑107:2012 et l’IEC 62271‑37‑013:2015 sont également prises en considération en 7.101.2;
i) une description plus précise de la catégorie LSC est donnée avec l'inclusion d'un ordinogramme explicatif (Annexe D);
j) les exemples non couverts par l’essai IAC sont transférés de l’Article 6 au paragraphe 9.103;
k) le terme "ensemble" est défini à l'Article 3 et est utilisé comme synonyme d'"appareillage sous enveloppe métallique" dans le présent document;
l) "métallique" est remplacé par "en métal" le cas échéant;
m) le paragraphe 6.105 est maintenant couvert par le paragraphe 7.7;
n) une règle de 1 s a été introduite pour le Critère No 4 lors des essais IAC concernant les gaz chauds par rapport aux particules incandescentes comme cause d'amorçage;
o) une description plus précise des essais d'arc interne pour les appareillages avec des protubérances est donnée à l’Annexe A.
La présente version bilingue (2021-07) correspond à la version anglaise monolingue publiée en 2021-05.
La version française de cette norme n'a pas été soumise au vote.

Visokonapetostne stikalne in krmilne naprave - 200. del: Stikalne in krmilne naprave v kovinskih ohišjih za naznačene izmenične napetosti nad 1 kV in do vključno 52 kV (IEC 62271-200:2021)

Ta del standarda IEC 62271 se uporablja za montažne sestave stikalnih in krmilnih naprav v kovinskih ohišjih, zasnovane za:
– izmenični tok;
– naznačene izmenične napetosti nad 1 kV in do vključno 52 kV;
– frekvence delovanja do vključno 60 Hz;
– notranjo in zunanjo namestitev.
Sestav lahko vključuje predelke, izolirane z zrakom in/ali napolnjene s tekočino.
Za komponente, nameščene v stikalnih in krmilnih napravah v kovinskih ohišjih, ta dokument dopolnjuje ali v nekaterih primerih celo nadomešča zahteve, določene v posameznih standardih za izdelke.
Seznam možnih komponent v stikalnih in krmilnih napravah v kovinskih ohišjih ni omejen na komponente, ki so izrecno navedene v tem dokumentu.

General Information

• Status: Published
• Publication Date: 22-Aug-2021
• ICS: 29.130.10 - High voltage switchgear and controlgear
• Technical Committee: SKA - Switchgear and control gear
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 04-Aug-2021
• Due Date: 09-Oct-2021
• Completion Date: 23-Aug-2021
• Ref Project: EN IEC 62271-200:2021 - High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

Relations

• Replaces: SIST EN 62271-200:2012/AC:2015 - High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
• Effective Date: 03-Aug-2021
• Replaces: SIST EN 62271-200:2012 - High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-200:2011)
• Effective Date: 03-Aug-2021
• Amended By: SIST EN IEC 62271-200:2021/A1:2024 - Amendment 1 - High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-200:2021/AMD1:2024)
• Effective Date: 14-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2021
Nadomešča:
SIST EN 62271-200:2012
SIST EN 62271-200:2012/AC:2015
Visokonapetostne stikalne in krmilne naprave - 200. del: Stikalne in krmilne
naprave v kovinskih ohišjih za naznačene izmenične napetosti nad 1 kV in do
vključno 52 kV (IEC 62271-200:2021)
High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and
controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-
200:2021)
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 200: Metallgekapselte
Wechselstrom-Schaltanlagen für Bemessungsspannungen über 1 kV bis einschließlich
52 kV (IEC 62271-200:2021)
Appareillage à haute tension - Partie 200: Appareillage sous enveloppe métallique pour
courant alternatif de tensions assignées supérieures à 1 kV et inférieures ou égales à 52
kV (IEC 62271-200:2021)
Ta slovenski standard je istoveten z: EN IEC 62271-200:2021
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62271-200

NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2021
ICS 29.130.10 Supersedes EN 62271-200:2012 and all of its
amendments and corrigenda (if any)
English Version
High-voltage switchgear and controlgear - Part 200: AC metal-
enclosed switchgear and controlgear for rated voltages above 1
kV and up to and including 52 kV
(IEC 62271-200:2021)
Appareillage à haute tension - Partie 200: Appareillage Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil
sous enveloppe métallique pour courant alternatif de 200: Metallgekapselte Wechselstrom-Schaltanlagen für
tensions assignées supérieures à 1 kV et inférieures ou Bemessungsspannungen über 1 kV bis einschließlich 52 kV
égales à 52 kV (IEC 62271-200:2021)
(IEC 62271-200:2021)
This European Standard was approved by CENELEC on 2021-07-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62271-200:2021 E

European foreword
The text of document 17C/782/FDIS, future edition 3 of IEC 62271-200, prepared by SC 17C
“Assemblies” of IEC/TC 17 “High-voltage switchgear and controlgear” was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62271-200:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–04–01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–07–01
document have to be withdrawn
This document supersedes EN 62271-200:2012 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62271-200:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62271-214:2019 NOTE Harmonized as EN IEC 62271-214:2019 (not modified)
IEC 60059:1999 NOTE Harmonized as EN 60059:1999 (not modified)
IEC 60243-1:2013 NOTE Harmonized as EN 60243-1:2013 (not modified)
IEC/TR 62271-307:2015 NOTE Harmonized as CLC IEC/TR 62271-307:2019 (not modified)
IEC 60909-0:2016 NOTE Harmonized as EN 60909-0:2016 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-151 - International Electrotechnical Vocabulary - - -
Part 151: Electrical and magnetic devices
IEC 60050-441 - International Electrotechnical Vocabulary. - -
Switchgear, controlgear and fuses
IEC 60060-1 2010 High-voltage test techniques - Part 1: EN 60060-1 2010
General definitions and test requirements
IEC 60270 2000 High-voltage test techniques - Partial EN 60270 2001
discharge measurements
+ A1 2015  + A1 2016
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code)
- -  + corrigendum May 1993
+ A1 1999  + A1 2000
+ A2 2013  + A2 2013
IEC 62262 2002 Degrees of protection provided by EN 62262 2002
enclosures for electrical equipment against
external mechanical impacts (IK code)
IEC 62271-1 2017 High-voltage switchgear and controlgear - EN 62271-1 2017
Part 1: Common specifications for
alternating current switchgear and
controlgear
IEC 62271-100 2021 High-voltage switchgear and controlgear - EN IEC 62271-100 2021
Part 100: Alternating-current circuit-
breakers
IEC 62271-102 2018 High-voltage switchgear and controlgear - EN IEC 62271-102 2018
Part 102: Alternating current disconnectors
and earthing switches
IEC 62271-103 2021 High-voltage switchgear and controlgear - - -
Part 103: Switches for rated voltages
above 1 kV up to and including 52 kV
IEC 62271-105 2021 High-voltage switchgear and controlgear - - -
Part 105: Alternating current switch-fuse
combinations for rated voltages above 1 kV
up to and including 52 kV
IEC 62271-106 2021 High-voltage switchgear and controlgear - EN IEC 62271-106 2021
Part 106: Alternating current contactors,
contactor-based controllers and motor-
starters
IEC 62271-107 2019 High-voltage switchgear and controlgear - EN IEC 62271-107 2019
Part 107: Alternating current fused circuit-
switchers for rated voltages above 1 kV up
to and including 52 kV
IEC 62271-201 2014 High-voltage switchgear and controlgear - EN 62271-201 2014
Part 201: AC solid-insulation enclosed
switchgear and controlgear for rated
voltages above 1 kV and up to and
including 52 kV
IEC 62271-203 2011 High-voltage switchgear and controlgear - EN 62271-203 2012
Part 203: Gas-insulated metal-enclosed
switchgear for rated voltages above 52 kV
IEC 62271-213 2021 High-voltage switchgear and controlgear - EN IEC 62271-213 2021
Part 213: Voltage detecting and indicating
system
IEC 62271-215 2021 High-voltage switchgear and controlgear - EN IEC 62271-215 2021
Part 215: Phase comparator used with
VDIS
IEC 2015 High-voltage switchgear and controlgear -
IEEE 62271-37-013 Part 37–013: Alternating-current generator
circuit-breakers
IEC 62271-200 ®
Edition 3.0 2021-05
INTERNATIONAL
STANDARD
colour
inside
High-voltage switchgear and controlgear –

Part 200: AC metal-enclosed switchgear and controlgear for rated voltages

above 1 kV and up to and including 52 kV

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.130.10 ISBN 978-2-8322-9793-3

– 2 – IEC 62271-200:2021  IEC 2021
CONTENTS
FOREWORD . 6
INTRODUCTION . 9
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 11
3.1 General terms and definitions . 11
3.2 Assemblies of switchgear and controlgear . 13
3.3 Parts of assemblies . 13
3.4 Switching devices . 13
3.5 Parts of switchgear and controlgear . 13
3.6 Operational characteristics of switchgear and controlgear . 16
3.7 Characteristic quantities . 18
3.8 Index of definitions . 19
4 Normal and special service conditions . 20
5 Ratings . 21
5.1 General . 21
5.2 Rated voltage (U ) . 21
r
5.3 Rated insulation level (U , U , U ) . 21
d p s
5.4 Rated frequency (f ) . 21
r
5.5 Rated continuous current (I ) . 21
r
5.6 Rated short-time withstand currents (I , I ) . 21
k ke
5.7 Rated peak withstand currents (I , I ) . 22
p pe
5.8 Rated durations of short-circuit (t , t ) . 22
k ke
5.9 Rated supply voltage of auxiliary and control circuits (U ) . 23
a
5.10 Rated supply frequency of auxiliary and control circuits . 23
5.11 Rated pressure of compressed gas supply for controlled pressure systems . 23
5.101 Classification of earthing function through main switching device . 23
5.102 Rated cable test voltages (U , U ) . 23
ct (AC) ct (DC)
5.103 Ratings of the internal arc classification (IAC) . 23
6 Design and construction . 25
6.1 Requirements for liquids in switchgear and controlgear . 25
6.2 Requirements for gases in switchgear and controlgear . 25
6.3 Earthing of switchgear and controlgear . 25
6.4 Auxiliary and control equipment and circuits . 26
6.5 Dependent power operation . 26
6.6 Stored energy operation. 26
6.7 Independent unlatched operation (independent manual or power operation) . 26
6.8 Manually operated actuators . 26
6.9 Operation of releases. 26
6.10 Pressure/level indication . 27
6.11 Nameplates . 27
6.12 Locking devices . 28
6.13 Position indication .
...