SIST EN ISO 10685-2:2016

Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 2: Commercial information (ISO 10685-2:2016, Corrected version 2016-05-15)

This part of ISO 10685 specifies the commercial information and file format used for trading spectacle
frames and sunglasses.
This part of ISO 10685 includes sunglass clip-ons.

Augenoptik - Elektronischer Katalog und Warenbezeichnung für Brillenfassungen und Sonnenbrillen - Teil 2: Kaufmännische Daten (ISO 10685-2:2016, korrigierte Fassung 2016-05-15)

Dieser Teil von ISO 10685 legt die kaufmännischen Daten sowie das Datenformat fest, die beim Handel von Brillenfassungen und Sonnenbrillen angewendet werden.
Dieser Teil von ISO 10685 gilt auch für Sonnenbrillen-Clips.

Optique ophtalmique - Catalogue de montures de lunettes et de lunettes de soleil et identification - Partie 2: Informations commerciales (ISO 10685-2:2016, Version corrigée 2016-05-15)

ISO 10685-2:2016 spécifie les informations commerciales et le format de fichier utilisés pour la vente de montures de lunettes et de lunettes de soleil.
ISO 10685-2:2016 inclut les faces solaires (clip-on).

Očesna optika - Elektronski katalog in identifikacija okvirjev očal in sončnih očal - 2. del: Tržne informacije (ISO 10685-2:2016, popravljena verzija 2016-05-15)

Ta del standarda ISO 10685 določa tržne informacije in obliko zapisa datoteke, ki se uporablja za trgovanje z okvirji očal in sončnimi očali. Ta del standarda ISO 10685 zajema nastavke za sončna očala.

General Information

• Status: Published
• Public Enquiry End Date: 19-Dec-2015
• Publication Date: 19-May-2016
• ICS: 11.040.70 - Ophthalmic equipment
• Technical Committee: VAZ - Healthcare
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 08-Apr-2016
• Due Date: 13-Jun-2016
• Completion Date: 20-May-2016
• Ref Project: EN ISO 10685-2:2016 - Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 2: Commercial information (ISO 10685-2:2016, Corrected version 2016-05-15)

Relations

• Replaces: SIST EN ISO 10685-2:2013 - Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 2: Commercial information (ISO 10685-2:2012)
• Effective Date: 01-Jun-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10685-2:2016
01-junij-2016
Nadomešča:
SIST EN ISO 10685-2:2013
Očesna optika - Elektronski katalog in identifikacija okvirjev očal in sončnih očal -
2. del: Tržne informacije (ISO 10685-2:2016, popravljena verzija 2016-05-15)
Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and
identification - Part 2: Commercial information (ISO 10685-2:2016, Corrected version
2016-05-15)
Augenoptik - Elektronischer Katalog und Warenbezeichnung für Brillenfassungen und
Sonnenbrillen - Teil 2: Kaufmännische Daten (ISO 10685-2:2016, korrigierte Fassung
2016-05-15)
Optique ophtalmique - Catalogue de montures de lunettes et de lunettes de soleil et
identification - Partie 2: Informations commerciales (ISO 10685-2:2016, Version corrigée
2016-05-15)
Ta slovenski standard je istoveten z: EN ISO 10685-2:2016
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
SIST EN ISO 10685-2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10685-2:2016

---------------------- Page: 2 ----------------------
SIST EN ISO 10685-2:2016


EN ISO 10685-2
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2016
EUROPÄISCHE NORM
ICS 11.040.70 Supersedes EN ISO 10685-2:2012
English Version

Ophthalmic optics - Spectacle frames and sunglasses
electronic catalogue and identification - Part 2:
Commercial information (ISO 10685-2:2016, Corrected
version 2016-05-15)
Optique ophtalmique - Catalogue de montures de Augenoptik - Elektronischer Katalog und
lunettes et de lunettes de soleil et identification - Partie Warenbezeichnung für Brillenfassungen und
2: Informations commerciales (ISO 10685-2:2016, Sonnenbrillen - Teil 2: Kaufmännische Daten (ISO
Version corrigée 2016-05-15) 10685-2:2016, korrigierte Fassung 2016-05-15)
This European Standard was approved by CEN on 23 January 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10685-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10685-2:2016
EN ISO 10685-2:2016 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------
SIST EN ISO 10685-2:2016
EN ISO 10685-2:2016 (E)
European foreword
This document (EN ISO 10685-2:2016) has been prepared by Technical Committee ISO/TC 172 “Optics
and photonics” in collaboration with Technical Committee CEN/TC 170 “Ophthalmic optics” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by September 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 10685-2:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10685-2:2016, Corrected version 2016-05-15 has been approved by CEN as EN
ISO 10685-2:2016 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 10685-2:2016

---------------------- Page: 6 ----------------------
SIST EN ISO 10685-2:2016
INTERNATIONAL ISO
STANDARD 10685-2
Second edition
2016-03-01
Corrected version
2016-05-15
Ophthalmic optics — Spectacle frames
and sunglasses electronic catalogue
and identification —
Part 2:
Commercial information
Optique ophtalmique — Catalogue de montures de lunettes et de
lunettes de soleil et identification —
Partie 2: Informations commerciales
Reference number
ISO 10685-2:2016(E)
©
ISO 2016

---------------------- Page: 7 ----------------------
SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms . 1
5 Commercial information . 1
5.1 Identification . 1
5.2 Commercial data for frames item catalogue . 1
Annex A (normative) Field descriptions. 4
Annex B (informative) Electronic frame catalogue schema (commercial section) .7
Annex C (informative) Electronic frame catalogue XML sample (commercial section) .8
Bibliography .16
© ISO 2016 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.
The committee responsible for this document is ISO/TC 172, Optics and photonics, Subcommittee SC 7,
Ophthalmic optics and instruments.
This second edition cancels and replaces the first edition (ISO 10685–2:2012), of which it constitutes a
minor revision.
ISO 10685 consists of the following parts, under the general title Ophthalmic optics — Spectacle frames
and sunglasses electronic catalogue and identification:
— Part 1: Product identification and electronic catalogue product hierarchy
— Part 2: Commercial information
— Part 3: Technical information
This corrected version of ISO 10685–2:2016 incorporates the following corrections:
— the sentence in 5.2 relating to Annex A has been reworded;
— Annex A has been designated as “normative”.
iv © ISO 2016 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 10685-2:2016
INTERNATIONAL STANDARD ISO 10685-2:2016(E)
Ophthalmic optics — Spectacle frames and sunglasses
electronic catalogue and identification —
Part 2:
Commercial information
1 Scope
This part of ISO 10685 specifies the commercial information and file format used for trading spectacle
frames and sunglasses.
This part of ISO 10685 includes sunglass clip-ons.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 10685–1, Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and
identification — Part 1: Product identification and electronic catalogue product hierarchy
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
commercial information
information needed to order frames and sunglasses
4 Symbols and abbreviated terms
MSRP manufacturer suggested retail price
5 Commercial information
5.1 Identification
Any commercial information requires the appropriate frame identification as specified in ISO 10685-1.
5.2 Commercial data for frames item catalogue
Table 1 and Table 2 specify the fields used to identify the commercial information portion of the
electronic frame item catalogue. See also detailed field descriptions and examples in Annex A.
— “Name” column defines the tag and attribute names within the XML file (see Annex B for schema
definition).
— “O/M” column indicates whether a field is optional (O) or mandatory (M).
© ISO 2016 – All rights reserved 1

---------------------- Page: 11 ----------------------
SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

— “Format” column indicates the data type, e.g. TEXT.
— “Length” column indicates the field character length. The decimal lengths listed do not include the
decimal point or the sign. For example, a field with the length of three could contain “100”, “10.1” or
“-1.01”.
— “Description” column is the description of the field.
Table 1 — Spectacle frame information for the commercial portion of the electronic frame
catalogue
Name O/M Format Length Description
Usrtype M Text 1 Type of user
Usecod O Text 1 Type of use
Sdtpl O Date 10 Start date of the applicable wholesale price
Edtpl O Date 10 End date of the applicable wholesale price
Prc O Decimal Max 13 Wholesale price
Msrpsdtpl O Date 10 Start date of MSRP pricelist
Msrpedtpl O Date 10 End date of MSRP pricelist
Msrp O Decimal Max 13 Manufacturer suggested retail price
Image O Text Max 50 Name of image file
Mcoldes M Text Max 50 Manufacturer colour description
Nrf O Integer Max 3 NRF code or subset of NRF code for colour
Fmtyp O Text 1 Frame type as it relates to lens mounting
Mat M Text 1 Main material
Jntspg O Boolean 1 Sprung joint
Aspec O Text Max 100 Additional specifications of the frame
Shapes O Table See Table 3
Table 2 — Sunglass information for the commercial portion of the electronic frame catalogue
Name O/M Format Length Description
Usrtype M Text 1 Type of user
Usecod O Text 1 Type of use
Sdtpl O Date 10 Start date of the applicable wholesale price
Edtpl O Date 10 End date of the applicable wholesale price
Prc O Decimal Max 13 Wholesale price
Msrpsdtpl O Date 10 Start date of MSRP pricelist
Msrpedtpl O Date 10 End date of MSRP pricelist
Msrp O Decimal Max 13 Manufacturer suggested retail price
Image O Text Max 50 Name of image file
Mcoldes O Text Max 50 Manufacturer colour description
Nrf O Integer Max 3 NRF code or subset of NRF code for colour
Fmtyp O Text 1 Frame type as it relates to lens mounting
Mat M Text 1 Main material of the front
SMat O Text 1 Main material of the side
Jntspg O Boolean 1 Sprung joint
Aspec O Text Max 100 Additional specifications of the sunglass
Shapes O Table See Table 3
2 © ISO 2016 – All rights reserved

---------------------- Page: 12 ----------------------
SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

Table 2 (continued)
Name O/M Format Length Description
Lsbcurv O Decimal Max 4 Lens base curve
O Text Max 50 Lens description including colours and related prop-
Ldes
erties
O Text Max 50 Category of the lens (CEN in Europe, AS/NZS in Aus-
Ctyp
tralia, ANSI in USA)
Rtyp O Text Max 100 Restriction of the lens
Fltyp O Text 1 Filtration type of the lens
Lmat O Integer 1 Material of the lens
Table 3 — Rimless shapes
Name O/M Format Length Description
Shpid M Integer Max 14 Shape ID
Shpdesc O Text Max 50 Shape description
Shpimage O Text Max 50 Shape image file link
NOTE  Table 3 is repeatable. There can be multiple shapes for a rimless frame.
For sample XML file, see Annex C.
© ISO 2016 – All rights reserved 3

---------------------- Page: 13 ----------------------
SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

Annex A
(normative)

Field descriptions
Table A.1 contains detailed field descriptions and examples for the electronic frame catalogue.
Table A.1 — Field of descriptions and examples for the electronic frame catalogue
Name Example Comments/Codification Additional comments ebXML Mapping
Usrtype B A – man, B – woman, Manufacturer code to ReferencedOpticProduct →
C – child, D – unisex define gender type of DesignatedOpticProduct
frame. Classification →
ApplicableOpticProduct
Characteristic
Usecod A A – standard, B – sport ReferencedOpticProduct →
DesignatedOpticProduct
Classification →
ApplicableOpticProduct
Characteristic
Sdtpl 1997-07-16 YYYY-MM-DDThh:m- An indication the man- ApplicableOpticTrade
T19:20:30+01:00 m:ssTZD ufacturer has a price Agreement →
change and the date ValidityDelimitedPeriod
effective.
Edtpl 1997-10-16 YYYY-MM-DDThh:m- An indication the man- ApplicableOpticTrade
T19:20:30+01:00 m:ssTZD ufacturer has a price Agreement →
change and the date it ValidityDelimitedPeriod
is no longer effective.
Prc 50.00 Wholesale price of the ApplicableOpticTrade
product. Agreement →
SpecifiedOpticPrice
Information →
AssignedOpticPrice →
ChargeAmount
Msrpsdtpl 1997-07-16 YYYY-MM-DDThh:m- An indication the man- ApplicableOpticTrade
T19:20:30+01:00 m:ssTZD ufacturer has an MSRP Agreement →
change and the date ValidityDelimitedPeriod
effective.
Msrpedtpl 1997-10-16 YYYY-MM-DDThh:m- An indication the man- ApplicableOpticTrade
T19:20:30+01:00 m:ssTZD ufacturer has an MSRP Agreement →
change and the date it ValidityDelimitedPeriod
is no longer effective.
Msrp 130.00 Manufacturers Sug- ApplicableOpticTrade
gested Retail Price. Agreement →
SpecifiedOpticPrice
Information →
AssignedOpticPrice →
ChargeAmount
Image ftp://xyz.com The frame image URL MultimediaPresentation
to download the image. Picture →
DigitalImageBinaryObject
Mcoldes WHITE TRANS- ISO 16284 Frame colour de- ReferencedOpticProduct →
PARENT scription given by the ColorDescription
manufacturer.
4 © ISO 2016 – All rights reserved

---------------------- Page: 14 ----------------------
SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

Table A.1 (continued)
Name Example Comments/Codification Additional comments ebXML Mapping
Nrf 205 National retail fed- ReferencedOpticProduct →
eration colour code DesignatedOpticProduct
(needed only for US). Classification →
ApplicableOpticProduct
Characteristic
Fmtyp A A – rim mount, B – ReferencedOpticProduct →
semi-rimless mount, C – DesignatedOpticProduct
rimless mount Classification → SubClassCode
(with ClassCode=FrameClass)
Mat A A – plastic, B – combina- Manufacturer to indi- ReferencedOpticProduct →
tion, D – metal, Z – other cate frame front main ComposedOpticMaterial →
material. ApplicableOpticProduct
Characteristic
SMat A A – plastic, D – metal, Manufacturer to indi- ReferencedOpticProduct →
Z – other cate frame side main ComposedOpticMaterial →
material. ApplicableOpticProduct
Characteristic
Jntspg True Defines if the hinge is ReferencedOpticProduct →
a sprung joint
...

SLOVENSKI STANDARD
SIST EN ISO 10685-2:2016
01-junij-2016
1DGRPHãþD
SIST EN ISO 10685-2:2013
2þHVQDRSWLND(OHNWURQVNLNDWDORJLQLGHQWLILNDFLMDRNYLUMHYRþDOLQVRQþQLKRþDO
GHO7UåQHLQIRUPDFLMH,62
Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and
identification - Part 2: Commercial information (ISO 10685-2:2016)
Augenoptik - Elektronischer Katalog und Warenbezeichnung für Brillenfassungen und
Sonnenbrillen - Teil 2: Kaufmännische Daten (ISO 10685-2:2016)
Optique ophtalmique - Catalogue de montures de lunettes et de lunettes de soleil et
identification - Partie 2: Informations commerciales (ISO 10685-2:2016)
Ta slovenski standard je istoveten z: EN ISO 10685-2:2016
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
SIST EN ISO 10685-2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10685-2:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 10685-2:2016


EN ISO 10685-2
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2016
EUROPÄISCHE NORM
ICS 11.040.70 Supersedes EN ISO 10685-2:2012
English Version

Ophthalmic optics - Spectacle frames and sunglasses
electronic catalogue and identification - Part 2:
Commercial information (ISO 10685-2:2016)
Optique ophtalmique - Catalogue de montures de Augenoptik - Elektronischer Katalog und
lunettes et de lunettes de soleil et identification - Partie Warenbezeichnung für Brillenfassungen und
2: Informations commerciales (ISO 10685-2:2016) Sonnenbrillen - Teil 2: Kaufmännische Daten (ISO
10685-2:2016)
This European Standard was approved by CEN on 23 January 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10685-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10685-2:2016
EN ISO 10685-2:2016 (E)
Contents Page
European Foreword . 2
2

---------------------- Page: 4 ----------------------

SIST EN ISO 10685-2:2016
EN ISO 10685-2:2016 (E)
European Foreword
This document (EN ISO 10685-2:2016) has been prepared by Technical Committee ISO/TC 172 “Optics
and photonics” in collaboration with Technical Committee CEN/TC 170 “Ophthalmic optics” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by September 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 10685-2:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10685-2:2016 has been approved by CEN as EN ISO 10685-2:2016 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 10685-2:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 10685-2:2016
INTERNATIONAL ISO
STANDARD 10685-2
Second edition
2016-03-01
Ophthalmic optics — Spectacle frames
and sunglasses electronic catalogue
and identification —
Part 2:
Commercial information
Optique ophtalmique — Catalogue de montures de lunettes et de
lunettes de soleil et identification —
Partie 2: Informations commerciales
Reference number
ISO 10685-2:2016(E)
©
ISO 2016

---------------------- Page: 7 ----------------------

SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms . 1
5 Commercial information . 1
5.1 Identification . 1
5.2 Commercial data for frames item catalogue . 1
Annex A (informative) Field descriptions . 4
Annex B (informative) Electronic frame catalogue schema (commercial section) .7
Annex C (informative) Electronic frame catalogue XML sample (commercial section) .8
Bibliography .16
© ISO 2016 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.
The committee responsible for this document is ISO/TC 172, Optics and photonics, Subcommittee SC 7,
Ophthalmic optics and instruments.
This second edition cancels and replaces the first edition (ISO 10685–2:2012), of which it constitutes a
minor revision.
ISO 10685 consists of the following parts, under the general title Ophthalmic optics — Spectacle frames
and sunglasses electronic catalogue and identification:
— Part 1: Product identification and electronic catalogue product hierarchy
— Part 2: Commercial information
— Part 3: Technical information
iv © ISO 2016 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 10685-2:2016
INTERNATIONAL STANDARD ISO 10685-2:2016(E)
Ophthalmic optics — Spectacle frames and sunglasses
electronic catalogue and identification —
Part 2:
Commercial information
1 Scope
This part of ISO 10685 specifies the commercial information and file format used for trading spectacle
frames and sunglasses.
This part of ISO 10685 includes sunglass clip-ons.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 10685–1, Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and
identification — Part 1: Product identification and electronic catalogue product hierarchy
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
commercial information
information needed to order frames and sunglasses
4 Symbols and abbreviated terms
MSRP manufacturer suggested retail price
5 Commercial information
5.1 Identification
Any commercial information requires the appropriate frame identification as specified in ISO 10685-1.
5.2 Commercial data for frames item catalogue
Table 1 and Table 2 specify the fields used to identify the commercial information portion of the
electronic frame item catalogue. Additional information and examples are available in Annex A.
— “Name” column defines the tag and attribute names within the XML file (see Annex B for schema
definition).
— “O/M” column indicates whether a field is optional (O) or mandatory (M).
© ISO 2016 – All rights reserved 1

---------------------- Page: 11 ----------------------

SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

— “Format” column indicates the data type, e.g. TEXT.
— “Length” column indicates the field character length. The decimal lengths listed do not include the
decimal point or the sign. For example, a field with the length of three could contain “100”, “10.1” or
“-1.01”.
— “Description” column is the description of the field.
Table 1 — Spectacle frame information for the commercial portion of the electronic frame
catalogue
Name O/M Format Length Description
Usrtype M Text 1 Type of user
Usecod O Text 1 Type of use
Sdtpl O Date 10 Start date of the applicable wholesale price
Edtpl O Date 10 End date of the applicable wholesale price
Prc O Decimal Max 13 Wholesale price
Msrpsdtpl O Date 10 Start date of MSRP pricelist
Msrpedtpl O Date 10 End date of MSRP pricelist
Msrp O Decimal Max 13 Manufacturer suggested retail price
Image O Text Max 50 Name of image file
Mcoldes M Text Max 50 Manufacturer colour description
Nrf O Integer Max 3 NRF code or subset of NRF code for colour
Fmtyp O Text 1 Frame type as it relates to lens mounting
Mat M Text 1 Main material
Jntspg O Boolean 1 Sprung joint
Aspec O Text Max 100 Additional specifications of the frame
Shapes O Table See Table 3
Table 2 — Sunglass information for the commercial portion of the electronic frame catalogue
Name O/M Format Length Description
Usrtype M Text 1 Type of user
Usecod O Text 1 Type of use
Sdtpl O Date 10 Start date of the applicable wholesale price
Edtpl O Date 10 End date of the applicable wholesale price
Prc O Decimal Max 13 Wholesale price
Msrpsdtpl O Date 10 Start date of MSRP pricelist
Msrpedtpl O Date 10 End date of MSRP pricelist
Msrp O Decimal Max 13 Manufacturer suggested retail price
Image O Text Max 50 Name of image file
Mcoldes O Text Max 50 Manufacturer colour description
Nrf O Integer Max 3 NRF code or subset of NRF code for colour
Fmtyp O Text 1 Frame type as it relates to lens mounting
Mat M Text 1 Main material of the front
SMat O Text 1 Main material of the side
Jntspg O Boolean 1 Sprung joint
Aspec O Text Max 100 Additional specifications of the sunglass
Shapes O Table See Table 3
2 © ISO 2016 – All rights reserved

---------------------- Page: 12 ----------------------

SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

Table 2 (continued)
Name O/M Format Length Description
Lsbcurv O Decimal Max 4 Lens base curve
O Text Max 50 Lens description including colours and related prop-
Ldes
erties
O Text Max 50 Category of the lens (CEN in Europe, AS/NZS in Aus-
Ctyp
tralia, ANSI in USA)
Rtyp O Text Max 100 Restriction of the lens
Fltyp O Text 1 Filtration type of the lens
Lmat O Integer 1 Material of the lens
Table 3 — Rimless shapes
Name O/M Format Length Description
Shpid M Integer Max 14 Shape ID
Shpdesc O Text Max 50 Shape description
Shpimage O Text Max 50 Shape image file link
NOTE  Table 3 is repeatable. There can be multiple shapes for a rimless frame.
For sample XML file, see Annex C.
© ISO 2016 – All rights reserved 3

---------------------- Page: 13 ----------------------

SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

Annex A
(informative)

Field descriptions
Table A.1 contains detailed field descriptions and examples for the electronic frame catalogue.
Table A.1 — Field of descriptions and examples for the electronic frame catalogue
Name Example Comments/Codification Additional comments ebXML Mapping
Usrtype B A – man, B – woman, Manufacturer code to ReferencedOpticProduct →
C – child, D – unisex define gender type of DesignatedOpticProduct
frame. Classification →
ApplicableOpticProduct
Characteristic
Usecod A A – standard, B – sport ReferencedOpticProduct →
DesignatedOpticProduct
Classification →
ApplicableOpticProduct
Characteristic
Sdtpl 1997-07-16 YYYY-MM-DDThh:m- An indication the man- ApplicableOpticTrade
T19:20:30+01:00 m:ssTZD ufacturer has a price Agreement →
change and the date ValidityDelimitedPeriod
effective.
Edtpl 1997-10-16 YYYY-MM-DDThh:m- An indication the man- ApplicableOpticTrade
T19:20:30+01:00 m:ssTZD ufacturer has a price Agreement →
change and the date it ValidityDelimitedPeriod
is no longer effective.
Prc 50.00 Wholesale price of the ApplicableOpticTrade
product. Agreement →
SpecifiedOpticPrice
Information →
AssignedOpticPrice →
ChargeAmount
Msrpsdtpl 1997-07-16 YYYY-MM-DDThh:m- An indication the man- ApplicableOpticTrade
T19:20:30+01:00 m:ssTZD ufacturer has an MSRP Agreement →
change and the date ValidityDelimitedPeriod
effective.
Msrpedtpl 1997-10-16 YYYY-MM-DDThh:m- An indication the man- ApplicableOpticTrade
T19:20:30+01:00 m:ssTZD ufacturer has an MSRP Agreement →
change and the date it ValidityDelimitedPeriod
is no longer effective.
Msrp 130.00 Manufacturers Sug- ApplicableOpticTrade
gested Retail Price. Agreement →
SpecifiedOpticPrice
Information →
AssignedOpticPrice →
ChargeAmount
Image ftp://xyz.com The frame image URL MultimediaPresentation
to download the image. Picture →
DigitalImageBinaryObject
Mcoldes WHITE TRANS- ISO 16284 Frame colour de- ReferencedOpticProduct →
PARENT scription given by the ColorDescription
manufacturer.
4 © ISO 2016 – All rights reserved

---------------------- Page: 14 ----------------------

SIST EN ISO 10685-2:2016
ISO 10685-2:2016(E)

Table A.1 (continued)
Name Example Comments/Codification Additional comments ebXML Mapping
Nrf 205 National retail fed- ReferencedOpticProduct →
eration colour code DesignatedOpticProduct
(needed only for US). Classification →
ApplicableOpticProduct
Characteristic
Fmtyp A A – rim mount, B – ReferencedOpticProduct →
semi-rimless mount, C – DesignatedOpticProduct
rimless mount Classification → SubClassCode
(with ClassCode=FrameClass)
Mat A A – plastic, B – combina- Manufacturer to indi- ReferencedOpticProduct →
tion, D – metal, Z – other cate frame front main ComposedOpticMaterial →
material. ApplicableOpticProduct
Characteristic
SMat A A – plastic, D – metal, Manufacturer to indi- ReferencedOpticProduct →
Z – other cate frame side main ComposedOpticMaterial →
material. ApplicableOpticProduct
Characteristic
Jntspg True Defines if the hinge is ReferencedOpticProduct →
a sprung joint (true) or DesignatedOpticProduct
not (false). Classification →
ApplicableOpticProduct
Characteristic
Aspec Twinned pad Provide additional ReferencedOpticProduct →
information for the dif- DesignatedOpticProduct
ferentiation of fr
...

SLOVENSKI STANDARD
kSIST FprEN ISO 10685-2:2015
01-december-2015
2þHVQDRSWLND(OHNWURQVNLNDWDORJLQLGHQWLILNDFLMDRNYLUMHYRþDOLQVRQþQLKRþDO
GHO7UåQHLQIRUPDFLMH,62)',6
Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and
identification - Part 2: Commercial information (ISO/FDIS 10685-2:2015)
Augenoptik - Elektronischer Katalog und Warenbezeichnung für Brillenfassungen und
Sonnenbrillen - Teil 2: Kaufmännische Daten (ISO/FDIS 10685-2:2015)
Optique ophtalmique - Catalogue de montures de lunettes et de lunettes de soleil et
identification - Partie 2: Informations commerciales (ISO/FDIS 10685-2:2015)
Ta slovenski standard je istoveten z: FprEN ISO 10685-2
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
kSIST FprEN ISO 10685-2:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST FprEN ISO 10685-2:2015

---------------------- Page: 2 ----------------------
kSIST FprEN ISO 10685-2:2015
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 10685-2
ISO/TC 172/SC 7
Ophthalmic optics — Spectacle frames
Secretariat: DIN
and sunglasses electronic catalogue
Voting begins on:
2015-10-22 and identification —
Voting terminates on:
Part 2:
2015-12-22
Commercial information
Optique ophtalmique — Catalogue de montures de lunettes et de
lunettes de soleil et identification —
Partie 2: Informations commerciales
Please see the administrative notes on page iii
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 10685-2:2015(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2015

---------------------- Page: 3 ----------------------
kSIST FprEN ISO 10685-2:2015
ISO/FDIS 10685-2:2015(E)

ISO/CEN PARALLEL PROCESSING
This final draft has been developed within the International Organization for Standardization (ISO), and pro-
cessed under the ISO-lead mode of collaboration as defined in the Vienna Agreement. The final draft was
established on the basis of comments received during a parallel enquiry on the draft.
This final draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
two-month approval vote in ISO and formal vote in CEN.
Positive votes shall not be accompanied by comments.
Negative votes shall be accompanied by the relevant technical reasons.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
kSIST FprEN ISO 10685-2:2015
ISO/FDIS 10685-2:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms . 1
5 Commercial information . 1
5.1 Identification . 1
5.2 Commercial data for frames item catalogue . 1
Annex A (normative) Field descriptions. 4
Annex B (normative) Electronic frame catalogue schema (commercial section) .7
Annex C (informative) Electronic frame catalogue XML sample (commercial section) .8
Bibliography .16
© ISO 2015 – All rights reserved iii

---------------------- Page: 5 ----------------------
kSIST FprEN ISO 10685-2:2015
ISO/FDIS 10685-2:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.
The committee responsible for this document is ISO/TC 172, Optics and photonics, Subcommittee SC 7,
Ophthalmic optics and instruments.
This second edition cancels and replaces the first edition (ISO 10685–2:2012), of which it constitutes a
minor revision.
ISO 10685 consists of the following parts, under the general title Ophthalmic optics — Spectacle frames
and sunglasses electronic catalogue and identification:
— Part 1: Product identification and electronic catalogue product hierarchy
— Part 2: Commercial information
— Part 3: Technical information
iv © ISO 2015 – All rights reserved

---------------------- Page: 6 ----------------------
kSIST FprEN ISO 10685-2:2015
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 10685-2:2015(E)
Ophthalmic optics — Spectacle frames and sunglasses
electronic catalogue and identification —
Part 2:
Commercial information
1 Scope
This part of ISO 10685 specifies the commercial information and file format used for trading spectacle
frames and sunglasses.
This part of ISO 10685 includes sunglass clip-ons.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 10685–1, Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and
identification — Part 1: Product identification and electronic catalogue product hierarchy
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
commercial information
information needed to order frames and sunglasses
4 Symbols and abbreviated terms
MSRP manufacturer suggested retail price
5 Commercial information
5.1 Identification
Any commercial information requires the appropriate frame identification as specified in ISO 10685-1.
5.2 Commercial data for frames item catalogue
Table 1 and Table 2 specify the fields used to identify the commercial information portion of the
electronic frame item catalogue. Additional information and examples are available in Annex A.
— “Name” column defines the tag and attribute names within the XML file (see Annex B for schema
definition).
— “O/M” column indicates whether a field is optional (O) or mandatory (M).
— “Format” column indicates the data type, e.g. TEXT.
© ISO 2015 – All rights reserved 1

---------------------- Page: 7 ----------------------
kSIST FprEN ISO 10685-2:2015
ISO/FDIS 10685-2:2015(E)

— “Length” column indicates the field character length. The decimal lengths listed do not include
the decimal point or the sign. For example, a field with the length of three could contain
“100,”10.1” or “-1.01”.
— “Description” column is the description of the field.
Table 1 — Spectacle frame information for the commercial portion of the electronic frame
catalogue
Name O/M Format Length Description
Usrtype M Text 1 Type of user
Usecod O Text 1 Type of use
Sdtpl O Date 10 Start date of the applicable wholesale price
Edtpl O Date 10 End date of the applicable wholesale price
Prc O Decimal Max 13 Wholesale price
Msrpsdtpl O Date 10 Start date of MSRP pricelist
Msrpedtpl O Date 10 End date of MSRP pricelist
Msrp O Decimal Max 13 Manufacturer suggested retail price
Image O Text Max 50 Name of image file
Mcoldes M Text Max 50 Manufacturer colour description
Nrf O Integer Max 3 NRF code or subset of NRF code for colour
Fmtyp O Text 1 Frame type as it relates to lens mounting
Mat M Text 1 Main material
Jntspg O Boolean 1 Sprung joint
Aspec O Text Max 100 Additional specifications of the frame
Shapes O Table
See Table 3
Table 2 — Sunglass information for the commercial portion of the electronic frame catalogue
Name O/M Format Length Description
Usrtype M Text 1 Type of user
Usecod O Text 1 Type of use
Sdtpl O Date 10 Start date of the applicable wholesale price
Edtpl O Date 10 End date of the applicable wholesale price
Prc O Decimal Max 13 Wholesale price
Msrpsdtpl O Date 10 Start date of MSRP pricelist
Msrpedtpl O Date 10 End date of MSRP pricelist
Msrp O Decimal Max 13 Manufacturer suggested retail price
Image O Text Max 50 Name of image file
Mcoldes O Text Max 50 Manufacturer colour description
Nrf O Integer Max 3 NRF code or subset of NRF code for colour
Fmtyp O Text 1 Frame type as it relates to lens mounting
Mat M Text 1 Main material of the front
SMat O Text 1 Main material of the side
Jntspg O Boolean 1 Sprung joint
Aspec O Text Max 100 Additional specifications of the sunglass
2 © ISO 2015 – All rights reserved

---------------------- Page: 8 ----------------------
kSIST FprEN ISO 10685-2:2015
ISO/FDIS 10685-2:2015(E)

Table 2 (continued)
Name O/M Format Length Description
Shapes O Table See Table 3
Lsbcurv O Decimal Max 4 Lens base curve
O Text Max 50 Lens description including colours and related prop-
Ldes
erties
O Text Max 50 Category of the lens (CEN in Europe, as/NZS in Aus-
Ctyp
tralia, ANSI in USA)
Rtyp O Text Max 100 Restriction of the lens
Fltyp O Text 1 Filtration type of the lens
Lmat O Integer 1 Material of the lens
Table 3 — Rimless shapes
Name O/M Format Length Description
Shpid M Integer Max 14 Shape ID
Shpdesc O Text Max 50 Shape description
Shpimage O Text Max 50 Shape image file link
NOTE  Table 3 is repeatable. There can be multiple shapes for a rimless frame.
For sample XML file, see Annex C.
© ISO 2015 – All rights reserved 3

---------------------- Page: 9 ----------------------
kSIST FprEN ISO 10685-2:2015
ISO/FDIS 10685-2:2015(E)

Annex A
(normative)

Field descriptions
Table A.1 contains detailed field descriptions and examples for the electronic frame catalogue.
Table A.1 — Field of descriptions and examples for the electronic frame catalogue
Name Example Comments/Codifica- Additional comments ebXML Mapping
tion
Usrtype B A – man, B – woman, Manufacturer code to ReferencedOpticProduct → Des-
C – child, D – unisex define gender type of ignatedOpticProduct Classifica-
frame. tion → ApplicableOpticProduct
Characteristic
Usecod A A – standard, B – sport ReferencedOpticProduct → Des-
ignatedOpticProduct Classifica-
tion → ApplicableOpticProduct
Characteristic
Sdtpl 1997-07-16 YYYY-MM-DDThh:m- An indication the man- ApplicableOpticTradeAgree-
T19:20:30+01:00 m:ssTZD ufacturer has a price ment → ValidityDelimitedPeriod
change and the date
effective
Edtpl 1997-10-16 YYYY-MM-DDThh:m- An indication the man- ApplicableOpticTradeAgree-
T19:20:30+01:00 m:ssTZD ufacturer has a price ment → ValidityDelimitedPeriod
change and the date it
is no longer effective
Prc 50.00 Wholesale price of the ApplicableOpticTradeAgree-
product ment → SpecifiedOpticPriceIn-
formation → AssignedOptic-
Price → ChargeAmount
Msrpsdtpl 1997-07-16 YYYY-MM-DDThh:m- An indication the man- ApplicableOpticTradeAgree-
T19:20:30+01:00 m:ssTZD ufacturer has an MSRP ment → ValidityDelimitedPeriod
change and the date
effective
Msrpedtpl 1997-10-16 YYYY-MM-DDThh:m- An indication the man- ApplicableOpticTradeAgree-
T19:20:30+01:00 m:ssTZD ufacturer has an MSRP ment → ValidityDelimitedPeriod
change and the date it
is no longer effective.
Msrp 130.00 Manufacturers Sug- ApplicableOpticTradeAgree-
gested Retail Price ment → SpecifiedOpticPriceIn-
formation → AssignedOptic-
Price → ChargeAmount
Image ftp://xyz.com The frame image MultimediaPresentationPic-
URL to download the ture → DigitalImageBinaryOb-
image. ject
Mcoldes WHITE ISO 16284 Frame colour descrip- ReferencedOpticProduct →
TRANSPARENT tion given by the ColorDescription
manufacturer.
Nrf 205 National retail fed- ReferencedOpticProduct → Des-
eration colour code ignatedOpticProduct Classifica-
(needed only for US). tion → ApplicableOpticProduct
Characteristic
4 © ISO 2015 – All rights reserved

---------------------- Page: 10 ----------------------
kSIST FprEN ISO 10685-2:2015
ISO/FDIS 10685-2:2015(E)

Table A.1 (continued)
Name Example Comments/Codifica- Additional comments ebXML Mapping
tion
Fmtyp A A – rim mount, B – ReferencedOpticProduct →
semi-rimless mount, C DesignatedOpticProduct Classi-
– rimless mount fication → SubClassCode (with
ClassCode=FrameClass)
Mat A A – plastic, B – combina- Manufacturer to indi- ReferencedOpticProduct →
tion, D – metal, Z – other cate frame front main ComposedOpticMaterial →
material. ApplicableOpticProduct Charac-
teristic
SMat A A – plastic, D – metal, Manufacturer to indi- ReferencedOpticProduct →
Z – other cate frame side main ComposedOpticMaterial →
material. ApplicableOpticProduct Charac-
teristic
Jntspg True Defines if the hinge is ReferencedOpticProduct → Des-
a sprung joint (true) or ignatedOpticProduct Classifica-
not (false). tion → ApplicableOpticProduct
Characteristic
Aspec Twinned pad Provide additional ReferencedOpticProduct → Des-
information for the ignatedOpticProduct Classifica-
differentiation of tion → ApplicableOpticProduct
frames or sunglass (i.e Characteristic
bridge type, temple
tip, sun lens).
Shapes This table is depend- In Frame Shape product: Refer-
ent on the Fmtyp encedOpticProduct → Designat-
being rimless. This edOpticProduct Classification →
can support multiple SubClassCode (with Class-
shapes. Code=FrameShapeClass)
Shpid 1 The Shape id. In Frame Product: Reference-
dOpticProduct → Designate-
dOpticProduct Classification →
ApplicableOpticProduct Charac-
teristic
In Frame Shape product: Refer-
encedOpticProduct → Specifie-
dOpticProduct Identification →
ID
Shpdesc Oval The description of the In Frame Shape product: Refer-
shape. encedOpticProduct → ShortDe-
scription
Shpimage ftp://xyz.com The frame shape In Frame Shape product: Mul-
image URL to down- timediaPresentationPicture →
load the image. DigitalImageBinaryObject
Lsbcurv 06.00 ISO 13666 XX.XX DIOP- Nominal curvature of ReferencedOpticProduct → Des-
TRES the front surface of the ignatedOpticProduct Classifica-
lens. tion → ApplicableOpticProduct
Characteristic
Ldes Brown The description of the ReferencedOpticProduct → Des-
lens colour and related ignatedOpticProduct Classifica-
properties. tion → ApplicableOpticProduct
Characteristic
© ISO 2015 – All rights reserved 5

---------------------- Page: 11 ----------------------
kSIST FprEN ISO 10685-2:2015
ISO/FDIS 10685-2:2015(E)

Table A.1 (continued)
Name Example Comments/Codifica- Additi
...