SIST EN 4562:2004
(Main)Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series
Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series
This standard specifies the characteristics of welded reductors for inch series pipe couplings, in heat resisting steel, for aerospace applications.
Nominal pressure: Class D per ISO 6771
Série aérospatiale - Systeme de raccordement a souder, en acier résistant a chaud - Réducteurs - Série inch
La présente norme spécifie les caractéristiques des réducteurs pour systeme de raccordement a souder, en acier résistant a chaud, série inch pour applications aérospatiales.
Pression nominale : Classe D selon l'ISO 6771.
Série aérospatiale - Systeme de raccordement a souder, en acier résistant a chaud - Réducteurs - Série inch
Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch seriesSérie aérospatiale - Systeme de raccordement a souder, en acier résistant a chaud - Réducteurs - Série inchSérie aérospatiale - Systeme de raccordement a souder, en acier résistant a chaud - Réducteurs - Série inchAerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series49.080Aerospace fluid systems and componentsICS:Ta slovenski standard je istoveten z:EN 4562:2003SIST EN 4562:2004en01-maj-2004SIST EN 4562:2004SLOVENSKI
STANDARD
SIST EN 4562:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4562February 2003ICS 49.080English versionAerospace series - Pipe coupling, welded, in heat resisting steel- Reductors - Inch seriesSérie aérospatiale - Système de raccordement à souder,en acier résistant à chaud - Réducteurs - Série inchThis European Standard was approved by CEN on 14 September 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland andUnited Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4562:2003 ESIST EN 4562:2004
EN 4562:2003 (E)2ContentsForeword.31Scope.32Normative references.33Required characteristics.43.1Configuration – Dimensions – Tolerances – Masses.43.2Materials.44Designation.85Marking.86Technical specification.8SIST EN 4562:2004
EN 4562:2003 (E)3ForewordThis document EN 4562:2003 has been prepared by the European Association of Aerospace Manufacturers(AECMA).After enquiries and votes carried out in accordance with the rules of this Association, this Standard has receivedthe approval of the National Associations and the Official Services of the member countries of AECMA, prior to itspresentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by August 2003, and conflicting national standards shall be withdrawn at the latest byAugust 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard : Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and United Kingdom.1 ScopeThis standard specifies the characteristics of welded reductors for inch series pipe couplings, in heat resisting steel,for aerospace applications.Nominal pressure: Class D per ISO 67712 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorpora
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.