SIST EN 15701:2009
(Main)Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods
Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods
This European Standard specifies the requirements for thermoplastic cladding for insulation products for building equipment and industrial installations and the test methods to be used. The European Standard does not apply to systems in which the cladding has already been securely fixed over the whole surface of an insulating material in situ.
Kunststoffe - Ummantelungen aus thermoplastischen Kunststoffen für Dämmstoffe für die Haustechnik und für betriebstechnische Anlagen - Anforderungen und Prüfungen
Diese Europäische Norm legt die Anforderungen an Ummantelungen aus thermoplastischen Kunststoffen für Dämmstoffe für die Haustechnik und für betriebstechnische Anlagen sowie die anzuwendenden Prüfverfahren fest.
Diese Europäische Norm bezieht sich nicht auf Systeme bei denen die Ummantelungen bereits werkseitig vollflächig mit einem Dämmstoff fest verbunden worden sind.
Plastiques - Enveloppes thermoplastiques pour isolants destinés au bâtiment et aux installations industrielles - Exigences et essais
La présente Norme européenne stipule les exigences relatives aux éléments de revêtement thermoplastiques pour isolants destinés au bâtiment et aux installations industrielles ainsi que les méthodes d’essai à appliquer.
La présente Norme européenne ne s’applique pas aux systèmes pour lesquels les éléments de revêtement et l’isolant ont déjà été assemblés en usine sur toute la surface.
Polimerni materiali - Plastomerni jopiči za izoliranje proizvodov opreme stavb in za industrijske inštalacije - Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoffe - Ummantelungen aus thermoplastischen Kunststoffen für Dämmstoffe für die Haustechnik und für betriebstechnische Anlagen - Anforderungen und PrüfungenPlastiques - Enveloppes thermoplastiques pour isolants destinés au bâtiment et aux installations industrielles - Exigences et essaisPlastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods83.140.99Drugi izdelki iz gume in polimernih materialovOther rubber and plastics productsICS:Ta slovenski standard je istoveten z:EN 15701:2009SIST EN 15701:2009en,fr,de01-maj-2009SIST EN 15701:2009SLOVENSKI
STANDARD
SIST EN 15701:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15701March 2009ICS 83.140.99 English VersionPlastics - Thermoplastic jackets for insulation products forbuilding equipment and industrial installations - Requirementsand test methodsPlastiques - Enveloppes thermoplastiques pour isolantsdestinés au bâtiment et aux installations industrielles -Exigences et essaisKunststoffe - Ummantelungen aus thermoplastischenKunststoffen für Dämmstoffe für die Haustechnik und fürbetriebstechnische Anlagen - Anforderungen undPrüfungenThis European Standard was approved by CEN on 12 December 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15701:2009: ESIST EN 15701:2009
EN 15701:2009 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Requirements.5 4.1 Requirements for the material composition of the cladding.5 4.2 Requirements for VC residual monomer content.5 4.3 Technical and mechanical requirements.5 4.3.1 General.5 4.3.2 Technical and mechanical requirements for film for linear applications.5 4.3.3 Technical and mechanical requirements for the initial material for mouldings.6 4.3.4 Technical and mechanical requirements for the mouldings.6 4.3.5 Other requirements for film for linear applications and for the initial material for mouldings.7 4.4 Reaction to fire.7 5 Test methods.7 5.1 Chemical testing.7 5.1.1 VC residual monomer content.7 5.2 Mechanical testing.7 5.2.1 Film thickness.7 5.2.2 Tensile-impact strength.7 5.3 Reaction to fire test.7 6 Marking, labelling and packaging.8 Bibliography.9
Tables Table 1 — Tolerances relative to the nominal thickness.6 Table 2 — Minimum material thickness.6 Table 3 — Values to be made available.7
SIST EN 15701:2009
EN 15701:2009 (E) 3 Foreword This document (EN 15701:2009) has been prepared by Technical Committee CEN/TC 249 “Plastics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Eston
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.