SIST EN 61300-3-33:2001
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-33: Examinations and measurements - Ferrule withdrawal force
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-33: Examinations and measurements - Ferrule withdrawal force
Describes the procedure to measure the withdrawal force between the ferrule of the plug connector and the resilient alignment sleeve of the adapter.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Meßverfahren -- Teil 3-33: Untersuchungen und Messungen - Stiftausziehkraft
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 3-33: Examens et mesures - Force de retrait des embouts
Décrit une procédure pour mesurer la force de retrait entre l'embout de la fiche et la bague élastique d'alignement du raccord.
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examination and measurements - Ferrule withdrawal force (IEC 61300-3-33:1999)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61300-3-33:2001
01-februar-2001
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-33: Examination and measurements - Ferrule
withdrawal force (IEC 61300-3-33:1999)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 3-33: Examinations and measurements - Ferrule
withdrawal force
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Meßverfahren -- Teil 3-33: Untersuchungen und Messungen - Stiftausziehkraft
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 3-33: Examens et mesures - Force de
retrait des embouts
Ta slovenski standard je istoveten z: EN 61300-3-33:1999
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-33:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61300-3-33:2001
---------------------- Page: 2 ----------------------
SIST EN 61300-3-33:2001
---------------------- Page: 3 ----------------------
SIST EN 61300-3-33:2001
---------------------- Page: 4 ----------------------
SIST EN 61300-3-33:2001
NORME CEI
INTERNATIONALE IEC
61300-3-33
INTERNATIONAL
Première édition
STANDARD
First edition
1999-04
Dispositifs d'interconnexion
et composants passifs à fibres optiques –
Méthodes fondamentales d'essais et de mesures –
Partie 3-33:
Examens et mesures –
Force de retrait des embouts
Fibre optic interconnecting devices
and passive components –
Basic test and measurement procedures –
Part 3-33:
Examinations and measurements –
Ferrule withdrawal force
IEC 1999 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photo-copie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
J
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 5 ----------------------
SIST EN 61300-3-33:2001
61300-3-33 © IEC:1999 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 3-33: Examinations and measurements –
Ferrule withdrawal force
FOREWORD
1) The (International Electrotechnical Commission) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61300-3-33 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report of voting
86B/1173/FDIS 86B/1199/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
IEC 61300 consists of the following parts under the general title Fibre optic interconnecting
devices and passive components – Basic test and measurement procedures:
– Part 1: General and guidance
– Part 2: Tests
– Part 3: Examinations and measurements
Annex A forms an integral part of this standard.
Annex B is for information only.
---------------------- Page: 6 -
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.