SIST EN 13810-1:2004
(Main)Wood-based panels - Floating floors - Part 1: Performance specifications and requirements
Wood-based panels - Floating floors - Part 1: Performance specifications and requirements
This European Standard provides the performance specifications and requirements for wood-based panels used in floating floors.
Holzwerkstoffe - Schwimmend verlegte Fußböden - Teil 1: Leistungsspezifikationen und Anforderungen
Diese Europäische Norm legt Leistungsspezifikationen sowie Anforderungen an Holzwerkstoffe fest, die in nichttragenden, schwimmend verlegten Fußböden verwendet werden, die vollflächig unterstützt werden.
Panneaux a base de bois - Planchers flottants - Partie 1: Exigences et spécifications fonctionnelles
La présente norme européenne prescrit les exigences et les spécifications fonctionnelles pour les panneaux a base de bois utilisés en planchers flottants.
Lesne plošče – Plavajoči podi – 1. del: Lastnosti in zahteve
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzwerkstoffe - Schwimmend verlegte Fußböden - Teil 1: Leistungsspezifikationen und AnforderungenPanneaux a base de bois - Planchers flottants - Partie 1: Exigences et spécifications fonctionnellesWood-based panels - Floating floors - Part 1: Performance specifications and requirements79.060.01Wood-based panels in generalICS:Ta slovenski standard je istoveten z:EN 13810-1:2002SIST EN 13810-1:2004en01-januar-2004SIST EN 13810-1:2004SLOVENSKI
STANDARD
SIST EN 13810-1:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13810-1December 2002ICS 79.060.01English versionWood-based panels - Floating floors - Part 1: Performancespecifications and requirementsPanneaux à base de bois - Planchers flottants - Partie 1:Exigences et spécifications fonctionnellesHolzwerkstoffe - Schwimmend verlegte Fußböden - Teil 1:Leistungsspezifikationen und AnforderungenThis European Standard was approved by CEN on 23 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13810-1:2002 ESIST EN 13810-1:2004
EN 13810-1:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.64Specifications.64.1Wood-based panel decking.64.1.1General.64.1.2Durability.84.1.3Mechanical properties.104.2Supporting material.114.3Vapour control layer.115Performance requirements.115.1Stiffness.115.2Loads and deflection limits.116Sampling.127Documentation.13Annex A (informative)
Installation of floating floors.14A.1Examples for floating floors.14A.2Moisture during installation.16A.3Moisture content in use.16A.3.1General.16A.3.2Damp-proof membrane.16A.3.3Vapour control layer.16A.3.4Panel type.17A.4Installation.17A.4.1Sub-floors.17A.4.2Supporting material.18A.4.3Installation of panels.18Bibliography.19SIST EN 13810-1:2004
EN 13810-1:2002 (E)3ForewordThis document (EN 13810-1:2002) has been prepared by Technical Committee CEN/TC 112 “Wood-based pan-els”, the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by June 2003, and conflicting national standards shall be withdrawn at the latest byJune 2003.This standard is one of two performance standards for wood-based panels used in floating floors.No existing European Standard is superseded.Annex A is informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-tries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Swe-den, Switzerland and the United Kingdom.SIST EN 13810-1:2004
EN 13810-1:2002 (E)41 ScopeThis European Standard provides the performance specifications and requirements for wood-based panels used incontinuously fully supported non-structural floating floors.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references, the latest edition of thepublication referred to applies (including amendments).GeneralEN 318, Wood-based panels — Determination of dimensional changes associated with changes in relativehumidity.EN 321, Wood-based panels — Determination of moisture resistance under cyclic test conditions.EN 322, Wood-based panels — Determination of moisture content.EN 324-1, Wood-based panels — Determination of dimensions of boards — Part 1: Determination of thickness,width and length.EN 324-2, Wood-based panels — Determination of dimensions of boards — Part 2: Determination of squarenessand edge straightness.EN 335-3, Durability of wood and wood-based products — Definition of hazard classes of biological attack —Part 3: Application to wood-based panels.EN 789, Timber structures — Test methods — Determination of mechanical properties of wood-based panels.EN 1058, Wood-based panels — Determination of characteristic values of mechanical properties and density.EN 1087-1, Particleboards — Determination of moisture resistance — Part 1: Boil test.EN 1195, Timber structures — Test methods — Performance of structural floor decking.EN 12369-1, Wood-based panels — Characteristic values for structural design — Part 1: OSB, particleboards andfibreboards.EN 12871:2001, Wood-based panels — Performance specifications and requirements for load bearing boards foruse in floors, walls and roofs.EN 1991-1-1, Eurocode 1: Actions on structures — Part 1-1: General actions; Densities, self-weight and imposedloads for buildings.ENV 1995-1-1:1993, Eurocode 5 — Design of timber structures — Part 1-1: General rules and rules for buildings.prCEN/TS 13810-2, Wood-based panels — Floating floors — Part 2: Test methods.ParticleboardsEN 312-1, Particleboards — Specifications — Part 1: General requirements for all board types.SIST EN 13810-1:2004
EN 13810-1:2002 (E)5EN 312-4, Particleboards — Specifications — Part 4: Requirements for load-bearing boards for use in dryconditions.EN 312-5, Particleboards — Specifications — Part 5: Requirements for load-bearing boards for use in humidconditions.EN 312-6, Particleboards — Specifications — Part 6: Requirements for heavy duty load-bearing boards for use indry conditions.EN 312-7, Particleboards — Specifications — Part 7: Requirements for heavy duty load-bearing boards for use inhumid conditions.OSBEN 300, Oriented Strand Boards (OSB) — Definitions, classification and specifications.PlywoodEN 313-1, Plywood — Classification and terminology — Part 1: Classification.EN 313-2, Plywood — Classification and terminology — Part 2: Terminology.EN 314-1, Plywood — Bonding quality — Part 1: Test methods.EN 314-2, Plywood — Bonding quality — Part 2: Requirements.EN 315, Plywood — Tolerances for dimensions.EN 635-1, Plywood — Classification by surface appearance — Part 1: General.EN 635-2, Plywood — Classification by surface appearance — Part 2: Hardwood.EN 635-3, Plywood — Classification by surface appearance — Part 3: Softwood.EN 636-1, Plywood — Specifications — Part 1: Requirements for plywood for use in dry conditions.EN 636-2, Plywood — Specifications — Part 2: Requirements for plywood for use in humid conditions.EN 636-3, Plywood — Specifications — Part 3: Requirements for plywood for use in exterior conditions.ENV 1099, Plywood — Biological durability — Guidance for the assessment of plywood for use in different hazardclasses.Solid wood panelsEN 12775, Solid wood panels — Classification and terminology.EN 13017-1, Solid wood panels — Classification by surface appearance — Part 1: Softwood.EN 13017-2, Solid wood panels — Classification by surface appearance — Part 2: Hardwood.prEN 13353, Solid wood panels (SWP) — Requirements.prCEN/TS 13354, Solid wood panels — Bonding quality — Test method.FibreboardEN 622-1, Fibreboards — Specifications — Part 1: General requirements.SIST EN 13810-1:2004
EN 13810-1:2002 (E)6EN 622-2, Fibreboards — Specifications — Part 2: Requirements for hardboards.EN 622-3, Fibreboards — Specifications — Part 3: Requirements for medium boards.EN 622-5, Fibreboards — Specifications — Part 5: Requirements for dry process boards (MDF).Cement bonded particleboardsEN 634-1, Cement-bonded particleboards — Specifications — Part 1: General requirements.EN 634-2, Cement-bonded particleboards — Specifications — Part 2: Requirements for OPC bonded particle-boards for use in dry, humid and exterior conditions.3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply.3.1floating floordecking of wood-based panels continuously supported by one or more resilient materials, without being fixed to thefloor base3.2service classsee ENV 1995-1-1:19934 Specifications4.1 Wood-based panel decking4.1.1 GeneralAny load-bearing panel complying with EN 13986 may be used as floating floor systems.Specifications shall take into account the factors given in Tables 1 and 2.Table 1 — Characteristics of panel products to be considered in specificationsParticleboardOSBPlywood andsolid wood panelFibreboardCement bondedparticleboardGradeThicknessService classGradeThicknessService classLay-upWood-speciesSurface appearance classThicknessService classGradeThicknessService classGradeThicknessService classSIST EN 13810-1:2004
EN 13810-1:2002 (E)7The following parameters shall be specified for wood-based panels when used in floating floors (see Table 2):¾ type of (decking) panel;¾ joints;1) tongue and groove on all four panel edges;2) glue;¾ conditioning before installation:1) moisture content;2) dimensional changes due to change in moisture content.SIST EN 13810-1:2004
EN 13810-1:2002 (E)8Table 2 — European Standards for specifications and test methods relevant to the design parameters offloating floor deckingDesign parameterRelevant ENExplanationJoints— tongue & groove or similarEN 324-1/2DimensionEN 324-1Tolerances— nail, screw or similar—Specified by the performance test— glue type—Specified by the performance testConditioning before installation— moisture contentEN 322Specified by the manufacturerRelated to service class— dimensional changesEN 318Specified by the manufacturerRelated to service class and functionParticleboard— thicknessEN 324-1As stated by the manufacturerEN 312-1Tolerances— service class/gradeEN 312-4/5/6/
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.