Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-soluble chlorides (ISO 11127-7:2011)

This is one of a number of parts of ISO 11127 dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements on each are contained in ISO 11126. The ISO 11126 and ISO 11127 series have been drafted as a coherent set of International Standards on nonmetallic blast-cleaning abrasives. Information on all parts of both series is given in Annex A. This part of ISO 11127 specifies a method for the determination of water-soluble chlorides in non-metallic blastcleaning abrasives.

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Prüfverfahren für nichtmetallische Strahlmittel - Teil 7: Bestimmung der wasserlöslichen Chloride (ISO 11127-7:2011)

Dies ist ein Teil aus einer Reihe von Teilen der Norm ISO 11127, welche die Probenahme und die Prüfung von nichtmetallischen Strahlmitteln behandelt.
Die verschiedenen Arten nichtmetallischer Strahlmittel und Anforderungen an diese sind in den verschiedenen Teilen von ISO 11126 enthalten.
Die Normenreihen ISO 11126 und ISO 11127 wurden als zusammengehöriger Satz von Internationalen Normen über nichtmetallische Strahlmittel ausgearbeitet. Angaben über alle Teile der beiden Normenreihen sind im Anhang A enthalten.
Dieser Teil von ISO 11127 legt ein Verfahren für die Bestimmung von wasserlöslichen Chloriden in nichtmetallischen Strahlmitteln fest.

Péparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs non métalliques destinés à la préparation par projection - Partie 7 : Détermination des chlorures solubles dans l'eau (ISO 11127-7:2011)

L'ISO 11127-7:2011 spécifie une méthode pour la détermination des chlorures solubles dans l'eau présents dans les abrasifs non métalliques destinés à la préparation par projection.

Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Preskusne metode za nekovinske granulate za peskanje - 7. del: Ugotavljanje kloridov, topnih v vodi (ISO 11127-7:2011)

To je eden od več delov standarda ISO 11127, ki obravnavajo vzorčenje in preskušanje nekovinskih granulatov. Vrste nekovinskega granulata in zahteve za vsak granulat določa standard ISO 11126. Skupini ISO 11126 in ISO 11127 sta bili pripravljeni kot skladen sklop mednarodnih standardov za nekovinske granulate za peskanje. Informacije o vseh delih obeh skupin so podane v dodatku A. Ta del standarda ISO 11127 določa metodo za ugotavljanje v vodi topnih kloridov v nekovinskih granulatih za peskanje.

General Information

Status
Withdrawn
Public Enquiry End Date
09-May-2010
Publication Date
09-Jan-2012
Withdrawal Date
04-Jan-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
22-Dec-2022
Due Date
14-Jan-2023
Completion Date
05-Jan-2023

Relations

Buy Standard

Standard
EN ISO 11127-7:2012
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 11127-7:2010
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11127-7:2012
01-februar-2012
1DGRPHãþD
SIST EN ISO 11127-7:1997
Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov -
Preskusne metode za nekovinske granulate za peskanje - 7. del: Ugotavljanje
kloridov, topnih v vodi (ISO 11127-7:2011)
Preparation of steel substrates before application of paints and related products - Test
methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-
soluble chlorides (ISO 11127-7:2011)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Prüfverfahren für nichtmetallische Strahlmittel - Teil 7: Bestimmung der wasserlöslichen
Chloride (ISO 11127-7:2011)
Péparation des subjectiles d'acier avant application de peintures et de produits assimilés
- Méthodes d'essai pour abrasifs non métalliques destinés à la préparation par projection
- Partie 7 : Détermination des chlorures solubles dans l'eau (ISO 11127-7:2011)
Ta slovenski standard je istoveten z: EN ISO 11127-7:2011
ICS:
25.220.10 Priprava površine Surface preparation
SIST EN ISO 11127-7:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11127-7:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 11127-7:2012


EUROPEAN STANDARD
EN ISO 11127-7

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2011
ICS 25.220.10 Supersedes EN ISO 11127-7:1997
English Version
Preparation of steel substrates before application of paints and
related products - Test methods for non-metallic blast-cleaning
abrasives - Part 7: Determination of water-soluble chlorides (ISO
11127-7:2011)
Préparation des subjectiles d'acier avant application de Vorbereitung von Stahloberflächen vor dem Auftragen von
peintures et de produits assimilés - Méthodes d'essai pour Beschichtungsstoffen - Prüfverfahren für nichtmetallische
abrasifs non métalliques destinés à la préparation par Strahlmittel - Teil 7: Bestimmung der wasserlöslichen
projection - Partie 7 : Détermination des chlorures solubles Chloride (ISO 11127-7:2011)
dans l'eau (ISO 11127-7:2011)
This European Standard was approved by CEN on 14 December 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland  and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11127-7:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11127-7:2012
EN ISO 11127-7:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11127-7:2012
EN ISO 11127-7:2011 (E)
Foreword
This document (EN ISO 11127-7:2011) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at
the latest by June 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11127-7:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11127-7:2011 has been approved by CEN as a EN ISO 11127-7:2011 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 11127-7:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 11127-7:2012
INTERNATIONAL  ISO
STANDARD 11127-7
Second edition
2011-12-15
Preparation of steel substrates before
application of paints and related
products — Test methods for non-
metallic blast-cleaning abrasives —
Part 7:
Determination of water-soluble chlorides
Préparation des subjectiles d’acier avant application de peintures et de
produits assimilés — Méthodes d’essai pour abrasifs non métalliques
destinés à la préparation par projection —
Partie 7: Détermination des chlorures solubles dans l’eau
Reference number
ISO 11127-7:2011(E)
©
 ISO 2011

---------------------- Page: 7 ----------------------

SIST EN ISO 11127-7:2012
ISO 11127-7:2011(E)
COPYRIGHT PROTECTED DOCUMENT
©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 11127-7:2012
ISO 11127-7:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. Int
...

SLOVENSKI STANDARD
oSIST prEN ISO 11127-7:2010
01-maj-2010
Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov -
Preskusne metode za nekovinske granulate za peskanje - 7. del: Ugotavljanje
vodotopnih kloridov (ISO/DIS 11127-7:2009)
Preparation of steel substrates before application of paints and related products - Test
methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-
soluble chlorides (ISO/DIS 11127-7:2009)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Prüfverfahren für nichtmetallische Strahlmittel - Teil 7: Bestimmung der wasserlöslichen
Chloride (ISO/DIS 11127-7:2009)
Péparation des subjectiles d'acier avant application de peintures et de produits assimilés
- Méthodes d'essai pour abrasifs non métalliques destinés à la préparation par projection
- Partie 7 : Détermination des chlorures solubles dans l'eau (ISO/DIS 11127-7:2009)
Ta slovenski standard je istoveten z: prEN ISO 11127-7
ICS:
25.220.10 Priprava površine Surface preparation
oSIST prEN ISO 11127-7:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11127-7:2010

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11127-7:2010


EUROPEAN STANDARD
DRAFT
prEN ISO 11127-7
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2009
ICS 25.220.10 Will supersede EN ISO 11127-7:1997
English Version
Preparation of steel substrates before application of paints and
related products - Test methods for non-metallic blast-cleaning
abrasives - Part 7: Determination of water-soluble chlorides
(ISO/DIS 11127-7:2009)
Péparation des subjectiles d'acier avant application de Vorbereitung von Stahloberflächen vor dem Auftragen von
peintures et de produits assimilés - Méthodes d'essai pour
Beschichtungsstoffen - Prüfverfahren für nichtmetallische
abrasifs non métalliques destinés à la préparation par Strahlmittel - Teil 7: Bestimmung der wasserlöslichen
projection - Partie 7 : Détermination des chlorures solubles Chloride (ISO/DIS 11127-7:2009)
dans l'eau (ISO/DIS 11127-7:2009)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 139.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 11127-7:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11127-7:2010
prEN ISO 11127-7:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11127-7:2010
prEN ISO 11127-7:2009 (E)
Foreword
This document (prEN ISO 11127-7:2009) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of
which is held by DIN.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 11127-7:1997.
Endorsement notice
The text of ISO/DIS 11127-7:2009 has been approved by CEN as a prEN ISO 11127-7:2009 without any
modification.

3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 11127-7:2010

---------------------- Page: 6 ----------------------
oSIST prEN ISO 11127-7:2010
DRAFT INTERNATIONAL STANDARD ISO/DIS 11127-7
ISO/TC 35/SC 12 Secretariat: BSI
Voting begins on: Voting terminates on:
2009-12-17 2010-05-17
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Preparation of steel substrates before application of paints and
related products — Test methods for non-metallic blast-cleaning
abrasives —
Part 7:
Determination of water-soluble chlorides
Préparation des subjectiles d'acier avant application de peintures et de produits assimilés — Méthodes d'essai
pour abrasifs non métalliques destinés à la préparation par projection —
Partie 7: Détermination des chlorures solubles dans l'eau
[Revision of first edition (ISO 11127-7:1993)]
ICS 25.220.10

ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2009

---------------------- Page: 7 ----------------------
oSIST prEN ISO 11127-7:2010
ISO/DIS 11127-7
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2009 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 11127-7:2010
ISO/DIS 11127-7
Contents Page
Foreword .iii
1 Scope.1
2 Normative references.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.