SIST EN 13500:2003
(Main)Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification
Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification
This European Standard specifies the requirements for factory made products for external thermal insulation composite systems (ETICS) based on mineral wool, delivered as a kit, and used as thermal insulation for buildings.
The standard describes product characteristics and includes procedures for testing, marking and labelling.
ETICS are applied to external surfaces of new or existing walls and/or soffits to improve the thermal insulation. ETICS include special fittings (base profiles, corner profiles, etc.) to connect them to adjacent building structures (apertures, corners, parapets, etc.). ETICS give protection against weathering and improve the appearance of the buildings. They do not contribute the stability of the wall and/or soffits on which they are installed.
The standard covers systems where the thermal insulation material is required for the load transfer to the substrate.
This standard covers systems with a declared thermal resistance equal to or greater than 1 m2×K/W.
The requirements from national regulations concerning the mechanical resistance and stability of ETICS should be taken into account.
This standard does not cover the strength between the ETICS and the building surface to which it shall be fixed, i. e. the substrate.
Wärmedämmstoffe für Gebäude - Außenseitige Wärmedämm-Verbundsysteme (WDVS) aus Mineralwolle - Spezifikation
Diese Europäische Norm legt die Anforderungen an werkmäßig hergestellte Produkte für außenseitige Wärmedämm-Verbundsysteme (WDVS) mit Mineralwolle als Wärmedämmstoff fest, die als Bausatz geliefert und für die Wärmedämmung von Gebäuden genutzt werden.
Diese Norm beschreibt Produkteigenschaften und enthält Prüfverfahren sowie Festlegungen für die Kennzeichnung und Etikettierung.
WDVS werden an der Außenseite von alten oder neuen Wänden und/oder Untersichten zur Verbesserung der Wärmedämmung angebracht. Sie enthalten spezielle Verbindungsmittel (z.B. Sockelleisten, Eckschutzschienen usw.), um sie mit den angrenzenden Gebäudestrukturen (z.B. Öffnungen, Ecken, Sockel usw.) zu verbinden. WDVS schützen gegen Einflüsse des Wetters und verbessern das optische Erscheinungsbild der Gebäude. Sie tragen nicht zur Standsicherheit der Wand und/oder der Untersichten, auf der/denen sie angebracht werden, bei.
Die Norm umfasst Systeme, bei denen der Wärmedämmstoff zum Abtragen der Last auf den Untergrund erforderlich ist.
Diese Norm gilt für Produkte mit einem Wärmedurchlasswiderstand (Nennwert) gleich oder größer als 1 m2×K/W.
Die Anforderungen aus nationalen Verordnungen an die mechanische Festigkeit und die Standsicherheit von WDVS müssen berücksichtigt werden.
Diese Norm enthält keine Aussagen zur Festigkeit zwischen dem WDVS und der Gebäudeoberfläche, auf der es zu befestigen ist, d. h. dem Untergrund.
Produits isolants thermiques pour bâtiments - Systemes composites d'isolation thermique par l'extérieur (ETICS) a base de laine minérale - Spécification
La présente Norme européenne établit les exigences relatives aux produits manufacturés destinés aux systemes composites d'isolation thermique par l'extérieur (ETICS) a base de laine minérale, livrés en lots, et utilisés comme isolants thermiques pour bâtiments.
La norme décrit les caractéristiques des produits et comprend les modes opératoires d'essai, de marquage et d'étiquetage.
Les ETICS sont appliqués sur les surfaces extérieures des parois et/ou soffites, neufs ou existants, afin d'améliorer leur isolation thermique. Les ETICS comportent des raccords spécifiques (profilés de base, profilés d'angle, etc.) afin de les relier aux éléments de construction adjacents (ouvertures, retours d'angle, garde-corps, etc.). Ils assurent une protection contre les intempéries et améliorent l'aspect des bâtiments. Ces systemes ne contribuent pas a la stabilité des parois et/ou soffites sur lesquelles ils sont installés.
La norme traite des systemes ou le matériau isolant thermique est prévu pour le transfert de la charge vers le support.
Cette norme traite des systemes dont la résistance thermique déclarée est supérieure ou égale a 1 m2.K/W.
Il convient de prendre en compte les exigences des réglementations nationales concernant la résistance mécanique et la stabilité des ETICS.
La présente norme ne traite pas de la résistance aux efforts exercés par l'ETICS sur la surface du bâtiment sur lequel il doit etre fixé, c'est-a-dire le support.
Toplotnoizolacijski proizvodi za stavbe - Kontaktni fasadni toplotnoizolacijski sistemi (ETICS) na osnovi mineralne volne - Specifikacija
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za stavbe - Kontaktni fasadni toplotnoizolacijski sistemi (ETICS) na osnovi mineralne volne - SpecifikacijaWärmedämmstoffe für Gebäude - Außenseitige Wärmedämm-Verbundsysteme (WDVS) aus Mineralwolle - SpezifikationProduits isolants thermiques pour bâtiments - Systemes composites d'isolation thermique par l'extérieur (ETICS) a base de laine minérale - SpécificationThermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13500:2003SIST EN 13500:2003en01-december-2003SIST EN 13500:2003SLOVENSKI
STANDARD
SIST EN 13500:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13500August 2003ICS 91.100.60English versionThermal insulation products for buildings - External thermalinsulation composite systems (ETICS) based on mineral wool -SpecificationProduits isolants thermiques pour bâtiments - Systèmescomposites d'isolation thermique par l'extérieur (ETICS) àbase de laine minérale - SpécificationWärmedämmstoffe für Gebäude - AußenseitigeWärmedämm-Verbundsysteme (WDVS) aus Mineralwolle -SpezifikationThis European Standard was approved by CEN on 10 July 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13500:2003 ESIST EN 13500:2003
EN 13500:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms, definitions, symbols, units and abbreviated terms.53.1Terms and definitions.53.2Symbols, units and abbreviated terms.74Requirements.74.1General.74.2Thermal resistance.74.3Mechanical resistance and stability of the system.84.3.1Bond strength of the base coat to the MW board.84.3.2Bond strength of the adhesive to the MW board for ETICS fixed by an adhesive.84.3.3Pull-off resistance of the ETICS fixed by mechanical fixing.84.4Reaction to fire.94.5MW boards.94.6Tensile strength of the reinforcement.94.7Liquid water permeability of the system surface.104.8Resistance to impact.104.9Resistance to penetration.104.10Water vapour permeability.104.11Durability and adhesion of the finishing material on the base coat.115Test methods.115.1Sampling.115.2Conditioning.115.2.1Conditioning of the test specimen for the determination of the tensile bond strength of theadhesive to the thermal insulation material.115.2.2Conditioning of the test specimen in accordance with EN 1062-11 for the determination of thetensile bond strength of the base coat to the thermal insulation material, liquid waterpermeability of the system surface, resistance to impact, resistance to penetration, watervapour permeability, durability and adhesion of the finishing material on the base coat.115.3Testing.126Designation code.137Evaluation of conformity.138Marking and labelling.138.1The entire and specific information of all components of the kit has to be given on anaccompanying document that contains:.138.2Components conforming to this standard shall be clearly marked, either on the product or onthe label with the following information:.138.3Additional information:.148.3.1Reinforcement.148.3.2Adhesive:.148.3.3Base Coat:.148.3.4Finishing coat.148.3.5MW-Boards.148.3.6Rails.148.3.7Anchors.14Annex A (normative)
Factory production control.15Annex B (informative)
Additional information for customers and designers.17B.1Resistance of the system surface to cracking.17Bibliography.18SIST EN 13500:2003
EN 13500:2003 (E)3ForewordThis document EN 13500:2003 has been prepared by Technical Committee CEN/TC 88 “Thermal insulatingmaterials and products”, the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2004, and conflicting national standards shall be withdrawn at the latestby February 2004.This European Standard contains two annexes:Annex A (normative)Factory production controlAnnex B (informative)Additional information for customers and designersThis European Standard is one of a series of standards for insulation products used in buildings, but can be used inother areas where appropriate.This document includes a Bibliography.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13500:2003
EN 13500:2003 (E)41 ScopeThis European Standard specifies the requirements for factory made products for external thermal insulationcomposite systems (ETICS) based on mineral wool, delivered as a kit, and used as thermal insulation for buildings.The standard describes product characteristics and includes procedures for testing, marking and labelling.ETICS are applied to external surfaces of new or existing walls and/or soffits to improve the thermal insulation.ETICS include special fittings (base profiles, corner profiles, etc.) to connect them to adjacent building structures(apertures, corners, parapets, etc.). ETICS give protection against weathering and improve the appearance of thebuildings. They do not contribute to the stability of the wall and/or soffits on which they are installed.The standard covers systems where the thermal insulation material is required for the load transfer to the substrate.This standard covers systems with a declared thermal resistance equal to or greater than 1 m²×K/W.The requirements from national regulations concerning the mechanical resistance and stability of ETICS should betaken into account.This standard does not cover the strength between the ETICS and the building surface to which it shall be fixed,i. e. the substrate.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 1062-3, Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete –Part 3: Determination and classification of liquid-water transmission rate (permeability).EN 1062-11, Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete –Part 11: Methods of conditioning before testing.EN 12085, Thermal insulating products for building applications — Determination of linear dimensions of testspecimens.EN 13162, Thermal insulation products for buildings – Factory made mineral wool (MW) products – Specification.EN 13172, Thermal insulating products – Evaluation of conformity.EN 13494, Thermal insulation products for building applications – Determination of the tensile bond-strength of theadhesive and of the base coat to the thermal insulation material.EN 13495, Thermal insulation products for building applications – Determination of the pull-off resistance ofexternal thermal insulation composite systems (ETICS) (foam block test).EN 13496, Thermal insulation products for building applications – Determination of the mechanical properties ofglass fibre meshes.EN 13497, Thermal insulation products for building applications – Determination of the resistance to impact ofexternal thermal insulation composite systems (ETICS).EN 13498, Thermal insulation products for building applications – Determination of the resistance to penetration ofexternal thermal insulation composite systems (ETICS).SIST EN 13500:2003
EN 13500:2003 (E)5EN 13501-1, Fire classification of construction products and building elements – Part 1: Classification using testdata from reaction to fire tests.prEN 13820, Thermal insulating materials for building applications – Determination of organic content.EN 13823, Reaction to fire tests for building products – Building products excluding floorings exposed to thethermal attack by a single burning item.EN ISO 1182, Reaction to fire tests for building products – Non-combustibility test (ISO 1182:2002).EN ISO 1716, Reaction to fire tests for building products – Determination of the heat of combustion(ISO 1716:2002).prEN ISO 4628-2, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and sizeof defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering(ISO/FDIS 4628-2:2003)prEN ISO 4628-4, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and sizeof defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking(ISO/FDIS 4628-4:2003)prEN ISO 4628-5, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and sizeof defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO/FDIS4628-5:2003)EN ISO 6946, Building components and building elements – Thermal resistance and thermal transmittance –Calculation method (ISO 6946:1996).EN ISO 7783-2, Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete –Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999).prEN ISO 9229, Thermal insulation – Definitions of terms (ISO/DIS 9229:1997).EN ISO 10456, Building materials and products – Procedures for determining declared and design thermal values(ISO 10456:1999).EN ISO 11925-2, Reaction-to-fire-tests – Ignitability of building products subjected to direct impingement of flame –Part 2: Single-flame source test (ISO 11925-2:2002).ISO 1887, Textile glass – Determination of combustible matter-content.3 Terms, definitions, symbols, units and abbreviated terms3.1 Terms and definitionsFor the purposes of this European Standard the terms and definitions given in prEN ISO 9229 apply, together withthe following.3.1.1adhesive for ETICSsystem specific material for bonding the thermal insulation material to the substrate3.1.2base coat for ETICSsystem specific layer applied directly on to the thermal insulation material. It contains the reinforcement. The basecoat provides most of the mechanical properties of an ETICSSIST EN 13500:2003
EN 13500:2003 (E)63.1.3external thermal insulation composite system (ETICS)on site applied system of factory made products, delivered as a complete system from the system manufacturerand comprising, as a minimum, the following components specifially chosen by the manufacturer of the system forthe system and substrate:¾ a system specific adhesive and system specific mechanical fixing devices;¾ a system specific thermal insulation material;¾ one or more layers of a system specific base coat where at least one layer contains a reinforcement;¾ a system specific reinforcement;¾ a system specific finishing material which can include a decorative coat.All components of an ETICS are designed specifically for the system and the substrate by the manufacturer of thesystem.3.1.4finishing material for ETICSsystem specific mineral, organic and/or inorganic materials forming the final layer of an ETICS. The finishingmaterial combined with the base coat provides protection against the weather. It also gives texture and colour tothe system3.1.5glass fibre meshes for ETICSsystem specific textile fabrics consisting of continuous glass filament yarn in both the warp and the weft directionstreated with alkali resistant finish3.1.6mechanical fixing devices for ETICSsystem specific devices for securing thermal insulation systems to the substrate, for example rails or anchors3.1.7reinforcement for ETICSsystem specific materials embedded in the base coat to improve its mechanical strength. Reinforcements forETICS are usually glass fibre or metal meshes3.1.8soffitexposed horizontal undersurface of a part of a building3.1.9substratesurface of a new or existing wall or soffit. It can be faced with mineral or organic renders, or paint coatingsNOTESubstrates for reaction to fire test see EN 13238SIST EN 13500:2003
EN 13500:2003 (E)73.2 Symbols, units and abbreviated termsSymbols and units used in this standard:NAnchis the number of anchors per m²n/m²Ris the declared thermal resistance of the ETICSm2×K/WRDis the declared thermal resistance of the MW-boardsm2×K/WSdis the design wind load suctionkPaSkis the characteristic wind load suctionkPalDis the declared thermal conductivity of the MW-boardsW/(m×K)dis the thickness of the MW-boardsmmXd,Anchis the design pull-off resistance per anchorkPaXdis the design pull-off resistance of the ETICSkPaXk is the characte
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.