SIST EN 60034-8:2003
(Main)Rotating electrical machines -- Part 8: Terminal markings and direction of rotation
Rotating electrical machines -- Part 8: Terminal markings and direction of rotation
Applies to a.c. and d.c. machines and specifies: a) rules for the identification of winding connection points; b) marking of winding terminals; c) direction of rotation; d) relationship between terminal markings and direction of rotation; e) terminal marking of auxiliary devices; f) connection diagrams of machines for common applications. Turbine type synchronous machines are excluded in this standard
Drehende elektrische Maschinen -- Teil 8: Anschlussbezeichnungen und Drehsinn
Machines électriques tournantes -- Partie 8: Marques d'extrémité et sens de rotation
S'applique aux machines à courant continu et à courant alternatif et spécifie: a) les règles d'identification des points de couplage; b) le marquage des bornes d'enroulement; c) le sens de rotation; d) la relation entre les marques d'extrémité et le sens de rotation; e) les marques d'extrémité des appareils auxiliaires; f) les schémas de connexion des machines pour applications communes. Les machines synchrones de type à turbine sont exclues du domaine d'application de la présente norme.
Rotating electrical machines - Part 8: Terminal markings and direction of rotation (IEC 60034-8:2002)
General Information
Relations
Standards Content (Sample)
EUROPEAN STANDARD EN 60034-8
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2002
ICS 29.160.01 Supersedes HD 53.8 S5:1998
English version
Rotating electrical machines
Part 8: Terminal markings and direction of rotation
(IEC 60034-8:2002)
Machines électriques tournantes Drehende elektrische Maschinen
Partie 8: Marques d'extrémité Teil 8: Anschlussbezeichnungen
et sens de rotation und Drehsinn
(CEI 60034-8:2002) (IEC 60034-8:2002)
This European Standard was approved by CENELEC on 2002-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60034-8:2002 E
---------------------- Page: 1 ----------------------
EN 60034-8:2002 - 2 -
Foreword
The text of document 2/1200/FDIS, future edition 2 of IEC 60034-8, prepared by IEC TC 2, Rotating
machinery, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60034-8 on 2002-10-01.
This European Standard supersedes HD 53.8 S5:1998.
The following dates were fixed:
– latest date by whi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.