SIST-TS CEN/TS 17154-1:2019
(Main)Electronic fee collection - Evaluation of implementation for conformity to CEN/TS 16986 - Part 1: Test suite structure and purposes
Electronic fee collection - Evaluation of implementation for conformity to CEN/TS 16986 - Part 1: Test suite structure and purposes
This document provides a suite of tests in order to assess the central equipment of toll chargers and toll service providers for compliancy towards the requirements listed in CEN/TS 16986. This document contains the definition of such tests in the form of test cases, reflecting the required individual steps listed in specific Test Purposes defined in FprCEN/TS 17154-1. The test cases are written in Testing and Test Control Notation version 3 (TTCN v3).
Elektronische Gebührenerhebung - Konformitätsevaluierung von Implementierungen nach CEN/TS 16986 - Teil 1: Struktur der Testfolge und Testabsichten
Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti za izvajanje tehnične specifikacije CEN/TS 16986 - 1. del: Zgradba preskuševalnega niza in namen preskušanja
Ta dokument obsega nabor preskusov za oceno opreme central za pobiranje cestnine in ponudnikov cestninskih storitev za zagotavljanje skladnosti z zahtevami, navedenimi v CEN/TS 16986. Ta dokument vsebuje opredelitve teh preskusov v obliki preskusnih primerov, ki odražajo posamezne korake, navedene v določenih namenih preskušanja, določenih v standardu FprCEN/TS 17154-1. Preskusni primeri so zapisani v 3. različici zapisa preskušanja in krmilnih preskusov (TTCN v3).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 17154-1:2019
01-julij-2019
Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti za izvajanje tehnične
specifikacije CEN/TS 16986 - 1. del: Zgradba preskuševalnega niza in namen
preskušanja
Electronic fee collection - Evaluation of implementation for conformity to CEN/TS 16986 -
Part 1: Test suite structure and purposes
Elektronische Gebührenerhebung - Konformitätsevaluierung von Implementierungen
nach CEN/TS 16986 - Teil 1: Struktur der Testfolge und Testabsichten
Ta slovenski standard je istoveten z: CEN/TS 17154-1:2019
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST-TS CEN/TS 17154-1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17154-1:2019
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
May 2019
TECHNISCHE SPEZIFIKATION
ICS 35.240.60
English Version
Electronic fee collection - Evaluation of implementation for
conformity to CEN/TS 16986 - Part 1: Test suite structure
and purposes
Elektronische Gebührenerhebung -
Konformitätsevaluierung von Implementierungen nach
CEN/TS 16986 - Teil 1: Struktur der Testfolge und
Testabsichten
This Technical Specification (CEN/TS) was approved by CEN on 8 March 2019 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17154-1:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1:2019 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Abbreviations . 10
5 Test suite structure (TSS) . 11
5.1 Structure . 11
5.2 Test Purposes (TP) . 12
5.3 Conformance test report . 14
Annex A (normative) Test purposes (TP) for toll charger . 15
A.1 Common TPLan definitions . 15
A.2 Trusted underlying communication channel . 15
A.3 Transfer mechanism . 15
A.4 Base TPs . 16
A.5 USERDETAILS transaction type . 28
A.6 LISTOFUSERS transaction type . 37
A.7 EXCEPTIONLIST transaction type . 42
A.8 TRUSTOBJECTS transaction type . 52
A.9 PAYMENTCLAIM transaction type . 63
A.10 DSRC.CONTRACTISSUERLIST transaction type . 66
A.11 DSRC.EFCCONTEXTDATA transaction type. 70
A.12 DSRC.BILLINGDETAILS transaction type . 74
A.13 DSRC.REPORTABNORMALOBE transaction type . 77
A.14 GNSS.TOLLDECLARATION transaction type . 80
A.15 GNSS.BILLINGDETAILS.TSP transaction type . 94
A.16 GNSS.BILLINGDETAILS.TC transaction type . 109
A.17 GNSS.PAYMENTANNOUNCEMENT transaction type . 113
Annex B (normative) Test purposes (TP) for toll service provider . 124
B.1 Common TPLan definitions . 124
B.2 Trusted underlying communication channel . 124
B.3 Transfer mechanism . 124
B.4 Base TPs . 124
B.5 USERDETAILS transaction type . 136
B.6 LISTOFUSERS transaction type . 144
B.7 EXCEPTIONLIST transaction type . 153
B.8 TRUSTOBJECTS transaction type . 156
B.9 PAYMENTCLAIM transaction type . 162
B.10 DSRC.CONTRACTISSUERLIST transaction type . 172
B.11 DSRC.EFCCONTEXTDATA transaction type. 173
B.12 DSRC.BILLINGDETAILS transaction type . 185
B.13 DSRC.REPORTABNORMALOBE transaction type . 195
B.14 GNSS.TOLLDECLARATION transaction type . 206
B.15 GNSS.BILLINGDETAILS.TSP transaction type . 208
2
---------------------- Page: 4 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1:2019 (E)
B.16 GNSS.BILLINGDETAILS.TC transaction type . 211
B.17 GNSS.PAYMENTANNOUNCEMENT transaction type . 226
Annex C (normative) PCTR proforma for toll charger . 230
C.1 General . 230
C.2 Identification summary . 230
C.3 IUT Conformance status . 232
C.4 Static conformance summary . 232
C.5 Dynamic conformance summary . 232
C.6 Static conformance review report . 233
C.7 Test campaign report . 233
C.8 Observations . 236
Annex D (normative) PCTR proforma for toll service provider . 237
D.1 General . 237
D.2 Identification summary . 237
D.3 IUT Conformance status . 239
D.4 Static conformance summary . 239
D.5 Dynamic conformance summary . 239
D.6 Static conformance review report . 240
D.7 Test campaign report . 240
D.8 Observations . 243
Bibliography . 244
3
---------------------- Page: 5 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1:2019 (E)
European foreword
This document (CEN/TS 17154-1:2019) has been prepared by Technical Committee CEN/TC 278
“Intelligent transport systems”, the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
CEN/TS 17154, Electronic fee collection — Evaluation of implementation for conformity to
CEN/TS 16986, consists of two parts:
— Part 1: Test suite structure and purposes (this document); and
— Part 2: Abstract test suite.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
4
---------------------- Page: 6 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1:2019 (E)
Introduction
The standard on information exchange between service provision and toll charging (i.e. EN ISO 12855)
is a so-called toolbox standard. It provides the foundation for interoperability, but is not sufficient to
achieve technical interoperability. The interoperable application profile specified in CEN/TS 16986
makes choices amongst the options which EN ISO 12855 provides and defines a coherent set of
transactions, triggers and data elements for an interoperable data exchange at the interface between
toll service providers and toll chargers. The interoperable application profile supports both:
— dedicated short-range communication (DSRC)-based systems; and
— global navigation satellite systems /cellular network (GNSS/CN)-based – autonomous systems.
This document provides the specification for testing the conformity of technical implementations to
CEN/TS 16986. Technical implementations which can be tested using the specifications included in this
document are:
— central equipment of toll chargers; and
— central equipment of toll service providers.
While this Part of CEN/TS 17154 describes the tests on a higher abstract level (TSS&TP) which is
human readable, CEN/TS 17154-2 uses the test notation TTCN-3 to provide a test specification that can
be compiled and executed in test environments.
For the presentation of the test purposes the formal test purpose language (TPLan) is used. TPLan is
standardized by ETSI (e.g. in ETSI ES 202 553 and in the ETSI ES 203 119 series) for the explicit
purpose of applying a harmonized notation for test purpose descriptions.
The associated requirements specification CEN/TS 16986 supports the implementation of
interoperability in general and of European electronic toll service (EETS) in particular. The technical
requirements defined in CEN/TS 16986 correspond to requirements listed in
Commission Decision 2009/750/EC. CEN/TS 16986:2016, Table D.1 provides a list that outlines how
requirements in CEN/TS 16986:2016 relate to essential requirements in European legislation.
Consequently, the CEN/TS 17154 series supports the EETS in terms of providing a set of standardized
test specifications to evaluate conformance of implementation of toll chargers and toll service providers
– including implementations that provide interoperability.
5
---------------------- Page: 7 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1:2019 (E)
1 Scope
This document specifies the test suite structure (TSS) and test purposes (TP) to test conformity of
central equipment of both toll chargers and toll service providers versus CEN/TS 16986.
It further provides templates for the protocol conformance test reports (PCTR) for the implementation
under tests (IUT) for both the toll charger and the toll service provider.
This document contains the technical provisions to perform conformance testing of functional and
dynamic behaviour of implementations conforming to CEN/TS 16986.
NOTE The specifications in this Part provide the base for the tree and tabular combined notation (TTCN) of
the test cases and steps which are provided in CEN/TS 17154-2.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
CEN/TS 16986:2016, Electronic Fee Collection - Interoperable application profiles for information
exchange between Service Provision and Toll Charging
EN ISO 12855:2015, Electronic fee collection - Information exchange between service provision and toll
charging (ISO 12855:2015)
ETSI ES 202 553 (V1.2.1:2009-06), Methods for Testing and Specification (MTS), TPLan: A notation for
expressing Test Purposes
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
attribute
addressable package of data consisting of a single data element or structured sequences of data
elements
[SOURCE: EN ISO 17575-1:2016, 3.2]
3.2
authentication
security mechanism allowing verification of the provided identity
[SOURCE: EN 301 175 V1.1.1 (1998-08), Clause 3]
6
---------------------- Page: 8 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1:2019 (E)
3.3
authenticator
data, possibly encrypted, that is used for authentication
[SOURCE: EN 15509:2014, 3.3]
3.4
base standard
approved international standard, technical specification or ITU-T Recommendation
Note 1 to entry: This includes but is not limited to approved standard deliverables from ISO, ITU, CEN, CENELEC,
ETSI and IEEE
[SOURCE: ISO/IEC TR 10000-1:1998, 3.1.1, modified — The bit "technical specification" and Note 1 to
entry were added.]
3.5
billing detail
information needed to determine or verify the amount due for the usage of a given service
[SOURCE: EN ISO 12855:2015, 3.1]
3.6
channel
information transfer path
[SOURCE: ISO 7498-2:1989, 3.3.13]
3.7
conformance testing
assessment to determine whether an implementation complies with the requirements
3.8
data element
coded information, which might itself consist of lower level information structures
[SOURCE: EN ISO 17575-1:2016, 3.9]
3.9
electronic fee collection
fee collection by electronic means
[SOURCE: EN ISO 12855:2015, 3.6]
3.10
evaluation
systematic process of determining how individuals, procedures, systems or programs have met
formally agreed objectives and requirements
[SOURCE: ISO 10795:2011, 1.90]
7
---------------------- Page: 9 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1:2019 (E)
3.11
implementation conformance statement
statement of capabilities and options that have been implemented defining to what extent the
implementation is compliant with a given specification
[SOURCE: CEN ISO/TS 14907-2:2016, 3.6]
3.12
implementation under test
implementation of one or more open systems interconnection (OSI) protocols in an adjacent
user/provider relationship, being part of a real system, which is to be studied by testing
3.13
interoperability
ability of systems to exchange information and to make mutual use of the information that has been
exchanged
[SOURCE: ISO/IEC TR 10000-1:1998, 3.2.1, modified — The beginning of the definition was slightly
altered.]
3.14
payment claim
recurring statement referring to concluded billing details made available to the payer by the payee
indicating and justifying the amount due
[SOURCE: EN ISO 12855:2015, 3.10]
3.15
profile
set of requirements and selected options from base standards or international standardized profiles
used to provide a specific functionality
[SOURCE: ISO/IEC TR 10000-1:1998, 3.1.4, modified — The whole wording of the definition was
modified and shortened and the original Note 1 to entry was left out.]
3.16
role
set of responsibilities
[SOURCE: ISO 17573:2010, 3.13]
3.17
test
procedure designed to measure characteristics of a component or system in specified conditions
[SOURCE: CEN ISO/TS 14907-1:2015, 3.20]
3.18
toll
charge, tax or duty levied in connection to using a vehicle in a toll domain
[SOURCE: CEN ISO/TS 19299:2015, 3.42, modified — "Any" was deleted at the start of the definition
and "in relation with" was replaced with "in connection to".]
8
---------------------- Page: 10 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1:2019 (E)
3.19
toll charger
entity which levies toll for the use of vehicles in a toll domain
[SOURCE: ISO 17573:2010, 3.16, modified — The wording of the definition was alted and the original
Note 1 to entry was left out.]
3.20
toll context
logical view as defined by attributes and functions of the basic elements of a toll scheme consisting of a
single basic tolling principle, a spatial distribution of the charge objects and a single behaviour of the
related Front End
[SOURCE: EN ISO 17575-1:2016, 3.17]
3.21
toll context data
information defined by the responsible toll charger necessary to establish the toll due for using a
vehicle on a particular toll context and to conclude the toll transaction
[SOURCE: EN ISO 12855:2015, 3.15]
3.22
toll declaration
statement to declare the usage of a given toll service to a toll charger
[SOURCE: CEN ISO/TS 19299:2015, 3.44]
3.23
toll domain
area or a part of a road network where a certain toll regime is applied
[SOURCE: ISO 17573:2010, 3.18, modified — "Certain" was added.]
3.24
toll regime
set of rules, including enforcement rules, governing the collection of toll in a toll domain
[SOURCE: ISO 17573:2010, 3.20]
3.25
toll service provider
entity providing toll services in one or more toll domains
[SOURCE: ISO 17573:2010, 3.23 modified]
3.26
transaction
whole of the exchange of information between two physically separated communication facilities
[SOURCE: EN ISO 17575-1:2016, 3.21]
9
---------------------- Page: 11 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1:2019 (E)
3.27
transaction type
identifier of a set of transactions that adhere to the same rules for the exchanged application protocol
data units in terms of triggers, timings, content and sequence
[SOURCE: CEN/TS 16986:2016, 3.8]
3.28
trust object
information object that is exchanged between entities to ensure mutual trust
[SOURCE: ISO 17573:2010, 3.28]
4 Abbreviations
For the purpose of this document, the following abbreviations apply throughout the document unless
otherwise specified.
ADU Application Data Unit (EN ISO 14906)
APCI Application-Protocol Control Information
APDU Application Protocol Data Unit (EN ISO 14906)
BI Behaviour Invalid (EN 15876-1)
BV Behaviour Valid (EN 15876-1)
DSRC Dedicated Short-Range Communication
EETS European Electronic Toll Service
EFC Electronic Fee Collection (ISO 17573)
GNSS Global Navigation Satellite Systems
IAP Interoperable Application Profile (EN ISO/IEC 9646-6)
ICS Implementation Conformance Statement (ISO/IEC 9646-7)
IUT Implementation Under Test (CEN ISO/TS 14907-1)
PCTR Protocol Conformance Test Report (EN 15876-1)
TC Toll Charger
TP Test Purpose
TPID Test Purpose Identification
TPLan Test Purpose Notation
TSP Toll Service Provider
TSS Test Suite Structure
TTCN Tree and Tabular Combined Notation
10
---------------------- Page: 12 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1:2019 (E)
5 Test suite structure (TSS)
5.1 Structure
The test suite structure (TSS) is made of two main groups of test purposes, depending on the role of the
implementation under test (IUT) in the overall architecture as to either the toll charger or the toll
service provider. These two main groups of test purposes are listed and specified in Annex A for the IUT
of the role of toll charger, and Annex B for the role of toll service provider. Each group is further divided
in subgroups that correspond to the transaction types specified in CEN/TS 16986, plus one subgroup
that collects all test purposes of a general usage. Finally, each subgroup is divided into test purposes to
check valid behaviours and test purposes to check invalid behaviours of the IUT. A general overview of
the TSS is provided in Table 1. For any of the subgroups listed in Table 1 test purposes for both valid
and invalid behaviour are specified in Annexes A and B.
Table 1 — Test Suite Structure
TP Group TP Subgroup
TC (IUT role is Toll Charger) Base TPs
USERDETAILS
LISTOFUSERS
EXCEPTIONLIST
TRUSTOBJECTS
PAYMENTCLAIM
DSRC.CONTRACTISSUERLIST
DSRC.EFCCONTEXTDATA
DSRC.BILLINGDETAILS
DSRC.REPORTABNORMALOBE
GNSS.TOLLDECLARATIONS
GNSS.BILLINGDETAILS.TSP
GNSS.BILLINGDETAILS.TC
GNSS.PAYMENTANNOUNCEMENT
TSP (IUT role is Toll Service Provider) Base TPs
USERDETAILS
LISTOFUSERS
EXCEPTIONLIST
TRUSTOBJECTS
PAYMENTCLAIM
DSRC.CONTRACTISSUERLIST
DSRC.EFCCONTEXTDATA
DSRC.BILLINGDETAILS
DSRC.REPORTABNORMALOBE
GNSS.TOLLDECLARATIONS
GNSS.BILLINGDETAILS.TSP
GNSS.BILLINGDETAILS.TC
GNSS.PAYMENTANNOUNCEMENT
11
---------------------- Page: 13 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1:2019 (E)
5.2 Test Purposes (TP)
5.2.1 TP naming conventions
Each TP is given a unique identification. This unique identification is built up to contain the following
string of information:
TP___-
The literal “TP” indicates that it is a Test Purpose while values used for the variable fields (enclosed in
<>) are as described in Table 2.
Table 2 — TP naming conventions
Identifier Values Meaning
TC central equipment of the toll charger
TSP central equipment of the toll service
provider
BASE base test purpose
USERDETAILS USERDETAILS transaction type
LISTOFUSERS LISTOFUSERS transaction type
EXCEPTIONLIST EXCEPTIONLIST transaction type
TRUSTOBJECTS TRUSTOBJECTS transaction type
PAYMENTCLAIM PAYMENTCLAIM transaction type
DSRC_CONTRACTISSUERLIST DSRC.CONTRACTISSUERLIST transaction
type
DSRC_EFCCONTEXTDATA DSRC.EFCCONTAXTDATA transaction
type
DSRC_BILLINGDETAILS DSRC.BILLINGDETAILS transaction type
DSRC_REPORTABNORMALOBE DSRC.ABNORMALOBE transaction type
GNSS_TOLLDECLARATION GNSS.TOLLDECLARATION transaction
type
GNSS_BILLINGDETAILS_TSP GNSS.BILLINGDETAILS.TSP transaction
type
GNSS_BILLINGDETAILS_TC GNSS.BILLINGDETAILS.TC transaction
type
GNSS_PAYMENTANNOUNCEMENT GNSS.PAYMENTANNOUNCEMENT
transaction type
BV valid behaviour tests
BI invalid behaviour tests
01 to NN test purpose number
12
---------------------- Page: 14 ----------------------
SIST-TS CEN/TS 17154-1:2019
CEN/TS 17154-1:2019 (E)
5.2.2 TP definition format conventions
The TPs are formatted according to harmonized rules shown in Table 3. All TPs are defined with their
details in Annex A and Annex B.
Table 3 — TP definition structure
TPID: Title:
The TPID is a unique identifier. It Short and meaningful description of Test Purpose objective.
shall be specified according to the
TP naming conventions defined in
5.2.1.
Reference Referenced clause(s) of CEN/TS 16986:2016 in which those
requirements are specified that are specifically tested in this
TP
TP validity condition Logical expression defining if test cases corresponding to the
TP shall be executed based on values in the referenced table
rows in CEN/TS 16986:2016, Annex A
Repetitions
Specification of potential repetitions of the TP with changed parameters or values of parameters.
Initial conditions
The conditions that define in which initial state the IUT has to
be to apply the actual TP.
The description shall use the TP notation TPLan as specified
in ETSI ES 202 553 (V1.2.1) (2009-06), 11.2.
Transaction sequence # Expected behaviour
Individual step in the transaction Description of the required behaviour of the IUT or tester in
according to numbering used in this transaction step.
CEN/TS 16986
The description shall use the TP notation TPLan as specified
in ETSI ES 202 553 (V1.2.1) (2009-06), 11.3. and 11.4.
NOTE The TP definition structure in general allows for an additional element named “Final conditions”. As
final conditions are not used in the TPs specified in this document this element is never present.
5.2.3 Symbols and keywords applied in TP definitions
Symbols and keywords which are particularly used in the description of the TPs shall be understood
with meanings according to Table 4.
13
---------------------- Page:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.