SIST EN 60626-1:2012

Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements

Deals with combined flexible insulating materials consisting of two or more different insulating materials laminated together. The components taken into consideration are plastic films and/or fibrous materials such as papers, woven or non-woven fabrics, impregnated or not impregnated.

Flexible Mehrschichtisolierstoffe zur elektrischen Isolation - Teil 1: Begriffe und allgemeine Anforderungen

Matériaux combinés souples destinés à l'isolement électrique - Partie 1: Définitions et prescriptions générales

Traite des matériaux isolants souples combinés, composés d'au moins deux matériaux isolants différents, contrecollés. Les constituants considérés sont des films de matière plastique et/ou des matériaux fibreux, comme les papiers, les tissés et les non-tissés, imprégnés ou non.

Sestavljeni gibki materiali za električno izolacijo - 1. del: Definicije in splošne zahteve

Ta del standarda IEC 60626 vsebuje definicije, povezane s sestavljenimi gibkimi materiali za električno izolacijo, in splošne zahteve, ki jih morajo izpolnjevati. Ta standard ne vključuje sljudnega papirja kot glavne komponente, ki je zajet v standardu IEC 60371, vendar se lahko uporablja kot dopolnilni material. Materiali, ki so skladni s to specifikacijo, ustrezajo določenim ravnem učinkovitosti. Vendar mora uporabnik material za določeno uporabo izbrati glede na dejanske zahteve za zadostno učinkovitost pri tej uporabi, ne samo na podlagi te specifikacije. VARNOSTNO OPOZORILO: Končni uporabnik je odgovoren za zagotavljanje varne uporabe metod, ki so zajete ali omenjene v tem dokumentu.

General Information

• Status: Published
• Publication Date: 14-Jun-2012
• ICS: 29.035.01 - Insulating materials in general
• Technical Committee: IIZS - Insulating materials and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jun-2012
• Due Date: 06-Aug-2012
• Completion Date: 15-Jun-2012
• Ref Project: EN 60626-1:2012 - Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements

Relations

• Replaces: SIST EN 60626-1:1998/A1:1998 - Combined flexible materials for electrical insulation -- Part 1: Definitions and general requirements
• Effective Date: 29-Jan-2023
• Replaces: SIST EN 60626-1:1998 - Combined flexible materials for electrical insulation -- Part 1: Definitions and general requirements
• Effective Date: 29-Jan-2023
• Replaces: SIST EN 60626-1:1998 - Combined flexible materials for electrical insulation -- Part 1: Definitions and general requirements
• Effective Date: 07-Jun-2022
• Revised: SIST EN IEC 60626-1:2024 - Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements (IEC 60626-1:2023)
• Effective Date: 16-Feb-2021
• Revised: SIST EN 60626-1:1998/A1:1998 - Combined flexible materials for electrical insulation -- Part 1: Definitions and general requirements
• Effective Date: 29-Sep-2008
• Revised: SIST EN 60626-1:1998 - Combined flexible materials for electrical insulation -- Part 1: Definitions and general requirements
• Effective Date: 29-Sep-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.]DKWHYHFlexible Mehrschichtisolierstoffe zur elektrischen Isolation - Teil 1: Begriffe und allgemeine AnforderungenMatériaux combinés souples destinés à l'isolement électrique - Partie 1: Définitions et prescriptions généralesCombined flexible materials for electrical insulation - Part 1: Definitions and general requirements29.035.01Izolacijski materiali na splošnoInsulating materials in generalICS:Ta slovenski standard je istoveten z:EN 60626-1:2012SIST EN 60626-1:2012en01-julij-2012SIST EN 60626-1:2012SLOVENSKI
STANDARDSIST EN 60626-1:1998/A1:1998SIST EN 60626-1:19981DGRPHãþD



SIST EN 60626-1:2012



EUROPEAN STANDARD EN 60626-1 NORME EUROPÉENNE
EUROPÄISCHE NORM May 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60626-1:2012 E
ICS 29.035.01 Supersedes EN 60626-1:1995 + A1:1996
English version
Combined flexible materials for electrical insulation -
Part 1: Definitions and general requirements (IEC 60626-1:2009)
Matériaux combinés souples destinés à l'isolement électrique -
Partie 1: Définitions et exigences générales (CEI 60626-1:2009)
Flexible Mehrschichtisolierstoffe zur elektrischen Isolierung -
Teil 1: Definitionen und allgemeine Anforderungen (IEC 60626-1:2009)
This European Standard was approved by CENELEC on 2012-03-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 60626-1:2012



EN 60626-1:2012 - 2 - Foreword The text of document 15/469/CDV, future edition 3 of IEC 60626-1, prepared by IEC/TC 15 "Solid electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60626-1:2012.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-12-23 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-03-23
This document supersedes EN 60626-1:1995 + A1:1996. EN 60626-1:2012 includes the following significant technical changes with respect to EN 60626-1:1995:
The Scope was revised specifying treatment of mica paper, and Table 1 was revised cancelling materials no longer in use and introducing newer materials.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 60626-1:2009 was approved by CENELEC as a European Standard without any modification. SIST EN 60626-1:2012



- 3 - EN 60626-1:2012 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year IEC 60554-3-1 1979 Specification for cellulosic papers for electrical purposes -
Part 3: Specifications for individual materials - Sheet 1: General purpose electrical paper - -
IEC 60626-3 2008 Combined flexible materials for electrical insulation -
Part 3: Specifications for individual materialsEN 60626-3 + corr. October
2008 2008
IEC 60641-3-2 2007 Pressboard and presspaper for electrical purposes -
Pa
...