SIST EN ISO 5172:2006/A2:2015
(Amendment)Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests (ISO 5172:2006/Amd 2:2015)
Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests (ISO 5172:2006/Amd 2:2015)
2013-05-28 LVO: Draft for // ENQ received in ISO/CS (see notification of 2013-05-27 in dataservice).
Gasschweißgeräte - Brenner für Schweißen, Wärmen und Schneiden - Anforderungen und Prüfungen (ISO 5172:2006/Amd 2:2015)
Matériel de soudage aux gaz - Chalumeaux pour soudage aux gaz, chauffage et coupage - Spécifications et essais (ISO 5172:2006/Amd 2:2015)
Oprema za plamensko varjenje - Gorilniki za plamensko varjenje, rezanje in segrevanje - Specifikacije in preskusi - Dopolnilo A2 (ISO 5172:2006/Amd 2:2015)
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5172:2006/A2:2015
01-julij-2015
Oprema za plamensko varjenje - Gorilniki za plamensko varjenje, rezanje in
segrevanje - Specifikacije in preskusi - Dopolnilo A2 (ISO 5172:2006/Amd 2:2015)
Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications
and tests (ISO 5172:2006/Amd 2:2015)
Gasschweißgeräte - Brenner für Schweißen, Wärmen und Schneiden - Anforderungen
und Prüfungen (ISO 5172:2006/Amd 2:2015)
Matériel de soudage aux gaz - Chalumeaux pour soudage aux gaz, chauffage et
coupage - Spécifications et essais (ISO 5172:2006/Amd 2:2015)
Ta slovenski standard je istoveten z: EN ISO 5172:2006/A2:2015
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 5172:2006/A2:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5172:2006/A2:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 5172:2006/A2:2015
EUROPEAN STANDARD
EN ISO 5172:2006/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2015
ICS 25.160.30
English Version
Gas welding equipment - Blowpipes for gas welding, heating and
cutting - Specifications and tests (ISO 5172:2006/Amd 2:2015)
Matériel de soudage aux gaz - Chalumeaux pour soudage Gasschweißgeräte - Brenner für Schweißen, Wärmen und
aux gaz, chauffage et coupage - Spécifications et essais Schneiden - Anforderungen und Prüfungen (ISO
(ISO 5172:2006/Amd 2:2015) 5172:2006/Amd 2:2015)
This amendment A2 modifies the European Standard EN ISO 5172:2006; it was approved by CEN on 5 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5172:2006/A2:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5172:2006/A2:2015
EN ISO 5172:2006/A2:2015 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5172:2006/A2:2015
EN ISO 5172:2006/A2:2015 (E)
Foreword
This document (EN ISO 5172:2006/A2:2015) has been prepared by Technical Committee ISO/TC 44
“Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 5172:2006 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2015, and
conflicting national standards shall be withdrawn at the latest by October 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notic
...
SLOVENSKI STANDARD
SIST EN ISO 5172:2006/A2:2015
01-julij-2015
Oprema za plamensko varjenje - Gorilniki za plamensko varjenje, rezanje in
segrevanje - Specifikacije in preskusi - Dopolnilo A2 (ISO 5172:2006/Amd 2:2015)
Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications
and tests (ISO 5172:2006/Amd 2:2015)
Gasschweißgeräte - Brenner für Schweißen, Wärmen und Schneiden - Anforderungen
und Prüfungen (ISO 5172:2006/Amd 2:2015)
Matériel de soudage aux gaz - Chalumeaux pour soudage aux gaz, chauffage et
coupage - Spécifications et essais (ISO 5172:2006/Amd 2:2015)
Ta slovenski standard je istoveten z: EN ISO 5172:2006/A2:2015
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 5172:2006/A2:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5172:2006/A2:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 5172:2006/A2:2015
EUROPÄISCHE NORM
EN ISO 5172:2006/A2
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2015
ICS 25.160.30
Deutsche Fassung
Gasschweißgeräte - Brenner für Schweißen, Wärmen und
Schneiden - Anforderungen und Prüfungen (ISO 5172:2006/Amd
2:2015)
Gas welding equipment - Blowpipes for gas welding, Matériel de soudage aux gaz - Chalumeaux pour soudage
heating and cutting - Specifications and tests (ISO aux gaz, chauffage et coupage - Spécifications et essais
5172:2006/Amd 2:2015) (ISO 5172:2006/Amd 2:2015)
Diese Änderung A2 modifiziert die Europäische Norm EN ISO 5172:2006. Sie wurde vom CEN am 5. März 2015 angenommen.
Die CEN-Mitglieder sind gehalten, die CEN/CENELEC-Geschäftsordnung zu erfüllen, in der die Bedingungen festgelegt sind, unter denen
diese Änderung in der betreffenden nationalen Norm, ohne jede Änderung, einzufügen ist. Auf dem letzten Stand befindliche Listen dieser
nationalen Normen mit ihren bibliographischen Angaben sind beim Management-Zentrum des CEN-CENELEC oder bei jedem CEN-
Mitglied auf Anfrage erhältlich.
Diese Änderung besteht in drei offiziellen Fassungen (Deutsch, Englisch, Französisch). Eine Fassung in einer anderen Sprache, die von
einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und dem Management-Zentrum des
CEN-CENELEC mitgeteilt worden ist, hat den gleichen Status wie die offiziellen Fassungen.
CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, der ehemaligen jugoslawischen
Republik Mazedonien, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland, Litauen, Luxemburg, Malta,
den Niederlanden, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, der Schweiz, der Slowakei, Slowenien, Spanien, der
Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und Zypern.
EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
CEN-CENELEC Management-Zentrum: Avenue Marnix 17, B-1000 Brüssel
© 2015 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. EN ISO 5172:2006/A2:2015 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten.
---------------------- Page: 3 ----------------------
SIST EN ISO 5172:2006/A2:2015
EN ISO 5172:2006/A2:2015 (D)
Inhalt
Seite
Vorwort .3
Einleitung .
...
SLOVENSKI STANDARD
SIST EN ISO 5172:2006/oprA2:2013
01-december-2013
Oprema za plamensko varjenje - Gorilniki za plamensko varjenje, rezanje in
segrevanje - Specifikacije in preskusi - Dopolnilo A2 (ISO 5172:2006/DAM 2:2013)
Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications
and tests (ISO 5172:2006/DAM 2:2013)
Gasschweißgeräte - Brenner für Schweißen, Wärmen und Schneiden - Anforderungen
und Prüfungen (ISO 5172:2006/DAM 2:2013)
Matériel de soudage aux gaz - Chalumeaux pour soudage aux gaz, chauffage et
coupage - Spécifications et essais (ISO 5172:2006/DAM 2:2013)
Ta slovenski standard je istoveten z: EN ISO 5172:2006/prA2
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 5172:2006/oprA2:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5172:2006/oprA2:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 5172:2006/oprA2:2013
DRAFT AMENDMENT ISO 5172:2006/DAM 2
ISO/TC 44/SC 8 Secretariat: DIN
Voting begins on Voting terminates on
2013-08-08 2014-01-08
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Gas welding equipment — Blowpipes for gas welding, heating
and cutting — Specifications and tests
AMENDMENT 2
Matériel de soudage aux gaz — Chalumeaux pour soudage aux gaz, chauffage et coupage — Spécifications et
essais
AMENDEMENT 2
ICS 25.160.30
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
© International Organization for Standardization, 2013
---------------------- Page: 3 ----------------------
SIST EN ISO 5172:2006/oprA2:2013
ISO 5172:2006/DAM 2
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any
means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission.
Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.