Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings

This European Standard specifies the characteristics of homogeneous and heterogeneous relief or studded rubber floor coverings, supplied in either tile or roll form.
This European Standard includes a classification system based on intensity of use, which shows where these resilient floor coverings should give satisfactory service (see EN 685). It also specifies requirements for marking.

Elastische Bodenbeläge - Spezifikationen für homogene und heterogene profilierte Elastomer-Bodenbeläge

Dieses Dokument legt die Eigenschaften homogener und heterogener profilierter Elastomer Bodenbeläge fest, die entweder in Platten  oder in Rollenform geliefert werden.
Dieses Dokument enthält ein Klassifizierungssystem auf der Grundlage der Nutzungsintensität, das zeigt, wo für diese Bodenbeläge ein zufriedenstellender Nutzen möglich wäre (siehe EN 685). Dieses Dokument legt auch die Anforderungen zur Kennzeichnung fest.

Revêtements de sol résilients - Spécifications des revêtements de sol homogènes et hétérogènes en caoutchouc à relief

La présente norme européenne prescrit les caractéristiques des revêtements de sol homogènes et hétérogènes en caoutchouc à relief ou avec un relief structuré, fournis en dalles ou en rouleaux.
La norme inclut un système de classification basé sur l'intensité d'utilisation, qui indique l'endroit où il convient que ces revêtements de sol rendent un service satisfaisant (voir l'EN 685). Elle spécifie également les exigences relatives au marquage.

Netekstilne talne obloge - Specifikacija homogenih in heterogenih reliefnih gumenih talnih oblog

Ta evropski standard določa lastnosti homogenih in heterogenih reliefnih ali nagrbančenih talnih oblog, ki se dobavljajo v obliki plošč ali zvitkov. Ta evropski standard vsebuje sistem označevanja, osnovan na intenzivnosti uporabe, ki kaže, kje bi te prožne talne obloge zadovoljivo služile (glej EN 685). Prav tako določa zahteve za označevanje.

General Information

Status
Withdrawn
Publication Date
12-Jul-2010
Withdrawal Date
11-May-2020
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
12-May-2020
Due Date
04-Jun-2020
Completion Date
12-May-2020

Relations

Buy Standard

Standard
EN 12199:2010
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Netekstilne talne obloge - Specifikacija homogenih in heterogenih reliefnih gumenih talnih oblogElastische Bodenbeläge - Spezifikationen für homogene und heterogene profilierte Elastomer-BodenbelägeRevêtements de sol résilients - Spécifications des revêtements de sol homogènes et hétérogènes en caoutchouc à reliefResilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings97.150Netekstilne talne oblogeNon-textile floor coveringsICS:Ta slovenski standard je istoveten z:EN 12199:2010SIST EN 12199:2010en,fr,de01-september-2010SIST EN 12199:2010SLOVENSKI
STANDARDSIST EN 12199:19991DGRPHãþD



SIST EN 12199:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12199
June 2010 ICS 97.150 Supersedes EN 12199:1998English Version
Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings
Revêtements de sol résilients - Spécifications des revêtements de sol homogènes et hétérogènes en caoutchouc à relief
Elastische Bodenbeläge - Spezifikationen für homogene und heterogene profilierte Elastomer-Bodenbeläge This European Standard was approved by CEN on 27 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12199:2010: ESIST EN 12199:2010



EN 12199:2010 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 General requirements .55 Classification requirements .66 Marking .7Annex A (informative)
Optional properties .8Bibliography .9 SIST EN 12199:2010



EN 12199:2010 (E) 3 Foreword This document (EN 12199:2010) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12199:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 12199:2010



EN 12199:2010 (E) 4 1 Scope This European Standard specifies the characteristics of homogeneous and heterogeneous relief or studded rubber floor coverings, supplied in either tile or roll form. This European Standard includes a classification system based on intensity of use, which shows where these resilient floor coverings should give satisfactory service (see EN 685). It also specifies requirements for marking. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 426, Resilient floor coverings – Determination of width, lengt
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.