SIST EN 61300-3-53:2015
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-53: Examinations and Measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) (IEC 61300-3-53:2015)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-53: Examinations and Measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) (IEC 61300-3-53:2015)
This part of IEC 61300 is intended to characterize the encircled angular flux of measurement
step index multimode waveguide light sources, in which most of the transverse modes are
excited. The term waveguide is understood to include both channel waveguides and optical
fibres but not slab waveguides in this standard.
Encircled angular flux (EAF) is the fraction of the total optical power radiating from a step
index multimode waveguide’s core within a certain solid angle. The EAF is measured as a
function of the numerical aperture full angle. The basic approach is to collect, for every
measurement, two dimensional far field data using a calibrated camera and to convert them
mathematically into encircled angular flux.
Lichtwellenleiter - Verbindungselemente und passive Bauteile -Grundlegende Prüf- und Messverfahren - Teil 3-53: Untersuchungen und Messungen - Verfahren zur Messung des winkelabhängigen begrenzten Lichtstroms (EAF) basierend auf den zweidimensionalen Fernfelddaten einer Mehrmodenfaser (IEC 61300-3-53:2015)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures fondamentales d'essais et de mesures - Partie 3-53 : Examens et mesures - Méthode de mesure du flux angulaire inscrit (EAF) fondée sur les données bidimensionnelles de champ lointain d'un guide d'onde multimodal à saut d'indice (fibre incluse) (IEC 61300-3-53:2015)
IEC 61300-3-53:2015 cette publication est destinée à caractériser le flux angulaire inscrit lors de mesures portant sur des sources de rayonnement lumineux dotées d’un guide d’ondes multimodal à saut d’indice, où la plupart des modes transversaux sont excités. Dans la présente norme, le terme « guide d’ondes » est à considérer comme incluant à la fois des guides d’ondes de canal et des fibres optiques, mais pas les guides d’ondes rectangulaires rigides. Le flux angulaire inscrit (EAF) est la fraction de la puissance optique totale rayonnée par le cœur d’un guide d’ondes multimodal à saut d’indice dans un certain angle solide. L’EAF est mesuré en fonction de l’angle d’ouverture numérique complet. L’approche fondamentale consiste à recueillir pour chaque mesure des données bidimensionnelles de champ lointain en utilisant une caméra étalonnée et à les convertir mathématiquement en flux angulaire inscrit.
Mots clés: flux angulaire inscrit (EAF). mesures portant sur des sources de rayonnement lumineux dotées d’un guide d’ondes multimodal
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 3-53. del: Preiskave in meritve - Merilna metoda obdanega koničastega pretoka (EAF), osnovana na dvodimenzionalnih podatkih daljnega polja iz večrodovnega valovoda (vključno z optičnim vlaknom) s stopničastim lomnim likom (IEC 61300-3-53:2015)
Ta del standarda IEC 61300 je namenjen opredelitvi obdanega koničastega pretoka svetlobnih virov večrodovnega valovoda s stopničastim lomnim likom, v katerem je vzbujena večina transverzalnih rodnih tipov. Izraz valovod zajema kanalske valovode in optična vlakna, ne pa tudi ploščatih valovodov v tem standardu.
Obdani koničasti pretok (EAF) je delež skupne optične moči, ki seva iz sredice večrodovnega valovoda s stopničastim lomnim likom v določenem prostorskem kotu. Obdani koničasti pretok se meri kot funkcija celotnega kota numerične aperture. Osnovni pristop temelji na zbiranju dvodimenzionalnih podatkov daljnega polja pri vsakem merjenju z umerjeno kamero ter njihovi matematični pretvorbi v obdani koničasti pretok.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61300-3-53:2015
01-oktober-2015
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXVQLLQPHULOQL
SRVWRSNLGHO 3UHLVNDYHLQPHULWYH0HULOQDPHWRGDREGDQHJDNRQLþDVWHJD
SUHWRND ($) RVQRYDQDQDGYRGLPHQ]LRQDOQLKSRGDWNLKGDOMQHJDSROMDL]
YHþURGRYQHJDYDORYRGD YNOMXþQR]RSWLþQLPYODNQRP VVWRSQLþDVWLPORPQLP
OLNRP ,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 3-53: Examinations and Measurements - Encircled
angular flux (EAF) measurement method based on two-dimensional far field data from
step index multimode waveguide (including fibre) (IEC 61300-3-53:2015)
Lichtwellenleiter - Verbindungselemente und passive Bauteile -Grundlegende Prüf- und
Messverfahren - Teil 3-53: Untersuchungen und Messungen - Verfahren zur Messung
des winkelabhängigen begrenzten Lichtstroms (EAF) basierend auf den
zweidimensionalen Fernfelddaten einer Mehrmodenfaser (IEC 61300-3-53:2015)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Procédures
fondamentales d'essais et de mesures - Partie 3-53 : Examens et mesures - Méthode de
mesure du flux angulaire inscrit (EAF) fondée sur les données bidimensionnelles de
champ lointain d'un guide d'onde multimodal à saut d'indice (fibre incluse) (IEC 61300-3-
53:2015)
Ta slovenski standard je istoveten z: EN 61300-3-53:2015
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-53:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61300-3-53:2015
---------------------- Page: 2 ----------------------
SIST EN 61300-3-53:2015
EUROPEAN STANDARD EN 61300-3-53
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2015
ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 3-53:
Examinations and measurements - Encircled angular flux (EAF)
measurement method based on two-dimensional far field data
from step index multimode waveguide (including fibre)
(IEC 61300-3-53:2015)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Procédures fondamentales d'essais et de Bauteile -Grundlegende Prüf- und Messverfahren - Teil 3-
mesures - Partie 3-53 : Examens et mesures - Méthode de 53: Untersuchungen und Messungen - Verfahren zur
mesure du flux angulaire inscrit (EAF) fondée sur les Messung des winkelabhängigen begrenzten Lichtstroms
données bidimensionnelles de champ lointain d'un guide (EAF) basierend auf den zweidimensionalen Fernfelddaten
d'onde multimodal à saut d'indice (fibre incluse) einer Mehrmodenfaser
(IEC 61300-3-53:2015) (IEC 61300-3-53:2015)
This European Standard was approved by CENELEC on 2015-03-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61300-3-53:2015 E
---------------------- Page: 3 ----------------------
SIST EN 61300-3-53:2015
EN 61300-3-53:2015 - 2 -
Foreword
The text of document 86B/3850/FDIS, future edition 1 of IEC 61300-3-53, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-3-53:2015.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2015-12-12
national lev
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.