oSIST prEN ISO 19152-3:2023
(Main)Geographic information - Land Administration Domain Model (LADM) - Part 3: Marine georegulation (ISO/DIS 19152-3:2023)
Geographic information - Land Administration Domain Model (LADM) - Part 3: Marine georegulation (ISO/DIS 19152-3:2023)
This part of ISO 19152 provides the concepts and structure for standardization for georegulation in the marine space.
This standard addresses the information structures related to management of legal spaces, such as the international maritime limits and boundaries, marine living and non-living resources management areas, marine conservation areas, etc. and their related rights and obligations.
This part of 19152 establishes the common elements and basic schema to structure marine georegulation information system. It builds upon the common components defined in 19152 Part 1 – Fundamentals.
Land Administration Domain Model (LADM) - Teil 3: Georegulierung des Meeres (ISO/DIS 19152-3:2023)
Information géographique - Modèle du domaine de l'administration des terres (LADM) - Partie 3: Géoréglementation marine (ISO/DIS 19152-3:2023)
Geografske informacije - Model domene za zemljiško administracijo (LADM) - 3. del: Georegulacija morja (ISO/DIS 19152-3:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 19152-3:2023
01-julij-2023
Geografske informacije - Model domene za zemljiško administracijo (LADM) - 3.
del: Georegulacija morja (ISO/DIS 19152-3:2023)
Geographic information - Land Administration Domain Model (LADM) - Part 3: Marine
georegulation (ISO/DIS 19152-3:2023)
Land Administration Domain Model (LADM) - Teil 3: Georegulierung des Meeres
(ISO/DIS 19152-3:2023)
Information géographique - Modèle du domaine de l'administration des terres (LADM) -
Partie 3: Géoréglementation marine (ISO/DIS 19152-3:2023)
Ta slovenski standard je istoveten z: prEN ISO 19152-3
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
oSIST prEN ISO 19152-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 19152-3:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 19152-3:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19152-3
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:
2023-05-29 2023-08-21
Geographic information — Land Administration Domain
Model (LADM) —
Part 3:
Marine georegulation
ICS: 35.240.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19152-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 19152-3:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19152-3
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:
Geographic information — Land Administration Domain
Model (LADM) —
Part 3:
Marine georegulation
ICS: 35.240.70
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 19152-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 19152-3:2023
ISO/DIS 19152-3:2023(E)
Contents Page
Foreword . vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 3
4 Conformance . 4
4.1 Conformance requirements and testing . 4
4.2 Conformance classes . 4
4.3 Conformance class 1 — Marine Limits and Boundaries in support of UNCLOS . 4
4.4 Conformance class 2 — General marine georegulation . 4
5 Notation . 4
6 Context . 5
7 Feature and attribute structure . 6
7.1 Structural overview . 6
7.2 Geometry structure . 7
7.3 Packages of the LADM Part 3 . 7
8 Marine Georegulation Application Schema. 8
8.1 Marine Georegulation Elements . 8
8.2 Inherited Core Packages . 10
8.3 MRN . 10
8.4 Party Section . 11
8.4.1 Party Section General . 11
8.4.2 MG_Party .12
8.4.3 MG_Party attributes and relationships .12
8.4.4 MG_PartyMember . .13
8.4.5 MG_PartyMember attributes and relationships .13
8.4.6 MG_PartyTypeList . 14
8.4.7 MG_GroupPartyTypeList . 14
8.4.8 Special Data Types . 14
8.5 Administrative Section . 15
8.5.1 Administrative Section General. 15
8.5.2 MG_BAUnit . 17
8.5.3 MG_BAUnit attributes and relationships . 17
8.5.4 MG_BAUnitTypeList . 18
8.5.5 MG_RRR . 18
8.5.6 MG_RRR attributes and relationships . 19
8.5.7 MG_Right . 19
8.5.8 MG_Right attributes and relationships . 19
8.5.9 MG_Responsibility . 20
8.5.10 MG_Responsibility attributes and relationships . 20
8.5.11 MG_Restriction .20
8.5.12 MG_Restriction attributes and relationships . 20
8.5.13 MG_Governance .20
8.5.14 MG_Governance attributes and relationships . 21
8.6 Party to Administrative Section . 22
8.7 Party to Administrative relationships . 22
8.7.1 rrrParty relationship . 22
8.7.2 baunitAsParty relationship . 22
8.8 Spatial Unit Section . 22
iii
© ISO 2023 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 19152-3:2023
ISO/DIS 19152-3:2023(E)
8.8.1 Spatial Unit Section General . 22
8.8.2 MG_FeatureUnit . 24
8.8.3 MG_FeatureUnit attributes and relationships . 25
8.8.4 MG_SpatialAttribute . 25
8.8.5 MG_SpatialAttribute attributes and relationships . 25
8.8.6 MG_AdditionalSpatialInformation . 26
8.8.7 MG_AdditionalSpatialInformation attributes and relationships . 27
8.8.8 MG_Location .28
8.8.9 MG_Location attributes and relationships .29
8.8.10 MG_Point . 29
8.8.11 MG_Point attributes and relationships .29
8.8.12 MG_PointAttributes .29
8.8.13 MG_PointAttributes attributes and relationships .30
8.8.14 locationReference dataType .30
8.8.15 MG_PointAttributes attributes .30
8.8.16 MG_LocationTypeList . 31
8.8.17 MG_PointTypeList . 31
8.8.18 MG_ InterpolationTypeList . 31
8.8.19 MG_Limit Spatial Unit Class . 31
8.8.20 MG_Limit. 32
8.8.21 MG_Limit attributes and relationships . 32
8.8.22 MG_Curve . 33
8.8.23 MG_Curve attributes and constraints . 33
8.8.24 MG_Curve_Attributes .33
8.8.25 MG_Curve_Attributes attributes and constraints . 33
8.8.26 8MG_ArcGeometryTypeList .34
8.8.27 MG_LimitTypeList .34
8.8.28 MG_Zone Spatial Unit Class .34
8.8.29 MG_Zone . . 35
8.8.30 MG_Zone attributes and relationships . . 35
8.8.31 MG_Surface .36
8.8.32 MG_Surface attributes . 36
8.8.33 MG_Surface_Attributes . .36
8.8.34 MG_ZoneTypeList . 37
8.8.35 MG_JurisdictionDomainTypeList . 37
8.8.36 LA_SurfaceRelationType . 37
8.8.37 LA_AreaType . . 37
8.8.38 LA_AreaValue . 37
8.8.39 MG_Space Spatial Unit Class . 37
8.8.40 MG_Space .38
8.8.41 MG_Space attributes and relationships .38
8.8.42 MG_Volume .39
8.8.43 MG_Volume_Attributes attributes .39
8.8.44 MG_SpaceTypeList . 39
8.8.45 LA_VolumeValue .40
8.9 Source Section .40
8.9.1 Source Section General .40
8.9.2 MG_Source. 41
8.9.3 MG_Source attributes and relationships. 41
8.9.4 LA_AvailabilityStatusType . 43
8.9.5 ExtArchive . 43
8.9.6 CI_OnlineResource . 43
8.9.7 DQ_Element .44
8.10 Versioning .44
8.10.1 General Approach to Versioning .44
8.10.2 Versioned Object . 45
Annex A (normative) Abstract test suite .46
iv
© ISO 2023 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 19152-3:2023
ISO/DIS 19152-3:2023(E)
Annex B (normative) Marine contexts .47
Bibliography .53
v
© ISO 2023 – All rights reserved
---------------------- Page: 7 ----------------------
oSIST prEN ISO 19152-3:2023
ISO/DIS 19152-3:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics.
An additional part is planned to address Implementation Aspects (Part 6) under the general title
Geographic information — Land Administration Domain Model (LADM).
This edition of the ISO 19152 multi-part series of standards is backwards compatible to ISO 19152:2012
version of the Land Administration Domain Model.
In accordance with the ISO/IEC Directives, Part 2, 2018, Rules for the structure and drafting of
International Standards, in International Standards the decimal sign is a comma on the line. However,
the General Conference on Weights and Measures (Conférence Générale des Poids et Mesures) at its
meeting in 2003 passed unanimously the following resolution:
“The decimal marker shall be either a point on the line or a comma on the line.”
In practice, the choice between these alternatives depends on customary use in the language concerned.
In the technical areas of geodesy and geographic information it is customary for the decimal point
always to be used, for all languages. That practice is used throughout this document.
A list of all parts in the ISO 19152 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
vi
© ISO 2023 – All rights reserved
---------------------- Page: 8 ----------------------
oSIST prEN ISO 19152-3:2023
ISO/DIS 19152-3:2023(E)
Introduction
The initial version of this document, ISO 19152:2012, specifically addressed the land registration
aspects of land administration. This version introduces the broader term georegulation that addresses
any area of geographic information in which Rights, Restrictions or Responsibilities (RRR) can be
applied. Georegulation is the activity to delimit and assert control over geographical spaces through
regulations. This standard allows the objects of georegulation to be documented in a systematic and
consistent manner. Although the broader term georegulation is used throughout the document, the title
of the document remains the “Land Administration Domain Model” to retain compatibility with the
previous version of the standard.
This part of the document addresses georegulation in the marine environment. Rights and obligations
created by georegulation share a basic structure described in Part 1 of this document. Marine activity
is of great importance including transportation, resource extraction and food production (fishing and
marine aquaculture). Different rights and obligations may exist on the surface, in the water column and
on the seabed. The model defined in this part (Part 3) may be used for marine cadastres as well as other
Use Cases such as Conservation Areas, Living Resources and Fishery Management Areas, Non-Living
Resources Management Areas, Seabed tenure, etc, as well as to describe data in support of the United
[15]
Nations Convention on the Law of the Sea (UNCLOS) or other conventions such as administrative
areas described in support of safe navigation under the International Convention for the Safety of Life
[16]
At Sea (SOLAS) .
The oceans are the common heritage of humankind, and specific areas along coastlines are the
jurisdiction of nation states. In specific cases there are private rights, such as the rights associated with
fishing or resource extraction. Some individuals may have property rights on land adjacent to water
potentially extending into the area covered by water. This may be described in a marine cadastre,
described using the structures available in this document.
International marine rights are addressed in international treaties globally through UN conventions
[15]
and between nations; in particular, the United Nations Convention on the Law of the Sea (UNCLOS) .
Marine safety and navigation are addressed by the IMO international convention on Safety Of Life At
[16
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.