iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 357:2001

(Main)

Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance

Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance

This European Standard specifies a classification of transparent or translucent glass products for use in appropriate glazed elements intended specially to provide fire resistance. These glass products are described in European Standards on basic and processed glass products.

Glas im Bauwesen - Brandschutzverglasungen aus durchsichtigen oder durchscheinenden Glasprodukten -Klassifizierung des Feuerwiderstandes

Diese Europäische Norm legt eine Klassifizierung von durchsichtigen oder durchscheinenden Glaserzeugnissen fest zum Einsatz in geeigneten feuerwiderstandsfähigen Verglasungen. Diese Glaserzeugnisse werden in Europäischen Normen für Basisglasarten und weiterverarbeitete Glaserzeugnisse beschrieben.

Verre dans la construction - Eléments de construction vitrés résistant au feu incluant des produits verriers transparent ou translucides - Classification de la résistance au feu

Cette norme européenne spécifie une classification des produits verriers transparents ou translucides en vue de leur utilisation dans des éléments vitrés appropriés destinés spécialement a fournir une résistance au feu. Ces produits verriers sont décrits dans les normes européennes relatives aux produits de bases et produits transformés.

Steklo v stavbah - Ognjeodporni zastekljeni elementi s prozornimi in prosojnimi izdelki iz stekla - Razvrščanje po požarni odpornosti

General Information

Status
Withdrawn
Publication Date
31-Aug-2001
Withdrawal Date
28-Feb-2005
ICS
81.040.20 - Glass in building
Technical Committee
IGFI - Construction physics
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Mar-2005
Due Date
01-Mar-2005
Completion Date
01-Mar-2005
Directive
89/106/EEC - Construction products
Mandate
M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
M/BC/CEN/91/7 - CPD: Glass in building
Ref Project
EN 357:2000 - Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance

Relations

Replaced By
SIST EN 357:2005 - Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance
Effective Date
22-Dec-2008

Buy Standard

EN 357:2001EN 357:2001
PreviousNext
Standard
EN 357:2001
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glas im Bauwesen - Brandschutzverglasungen aus durchsichtigen oder durchscheinenden Glasprodukten -Klassifizierung des FeuerwiderstandesVerre dans la construction - Eléments de construction vitrés résistant au feu incluant des produits verriers transparent ou translucides - Classification de la résistance au feuGlass in building - Fire resistant glazed elements with tran
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12758:2019+A1:2023(Main + Amendment)
Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules
EN 12758:2019+A1:2023

This European Standard assigns sound insulation values to all transparent, translucent and opaque glass products, described in the European Standards for basic, special basic or processed glass products, when intended to be used in glazed assemblies in buildings, and which exhibit properties of acoustic protection, either as a prime intention or as a supplementary characteristic.
This document outlines the procedure, by which glass products may be rated, according to their acoustic performance which enables assessment of compliance with the acoustic requirements of buildings.
Rigorous technical analysis of measurement data remains an option, but this standard is intended to enable the derivation of simpler indices of performance, which can be adopted with confidence by non-specialists.
By adopting the principles of this standard the formulation of acoustic requirements in Building Codes and for product specification to satisfy particular needs for glazing is simplified.
It is recognised that the acoustic test procedures contained within EN ISO 140-1 and EN ISO 140-3 relate only to glass panes and their combinations. Although the same principles should be followed as closely as possible, it is inevitable that some compromises are necessary, because of the bulkier construction of other glazing types, e.g. glass blocks, paver units, channel-shaped glass, structural glazing and structural sealant glazing. Guidelines on how to adapt the test procedures for these glazing types are offered in Clause 4.
All the considerations of this standard relate to panes of glass/glazing alone. Incorporation of them into windows may cause changes in acoustic performance as a result of other influences, e.g. frame design, frame material, glazing material/method, mounting method, air tightness, etc. Measurements of the sound insulation of complete windows (glass and frame) may be undertaken to resolve such issues.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15434-1:2023(Main)
Bonding sealants - Part 1: Bonded glazing sealants for direct light exposure
EN 15434-1:2023

This document covers the requirements for and testing of sealants for use in one or more of the following applications:
a)   Manufacturing of insulating glass units where direct ultraviolet resistance and mechanical resistance (Bonding use) of the insulating glass edge seal are required.
b)   Manufacturing of factory-made bonded sealant glazing elements when referred to by the relevant European Standards and/or European Technical Approval Guidelines.
c)   Assembling of glass products into or onto supports, where also direct ultraviolet resistance and/or mechanical resistance (bonding use) of the seal are required, under controlled environmental conditions as described in EN 13022 2:2014, Clause 5.
NOTE 1   The required level of resistance to ultraviolet exposure will be dependent upon the chemistry of sealant. Reduced UV exposure testing is acceptable for proven silicone technologies. Extended UV exposure will be required for different technologies.
This document covers the evaluation of conformity and the factory production control with respect to the production of sealants in conformity with this document.
This document describes the role of sealants that are in conformity with this document, with respect to sealing and bonding.
This document does not apply to sealants for the manufacture of insulating glass units where the seal is fully protected, i.e. by a frame, from ultraviolet radiation.
NOTE 2   Sealants for this application comply with EN 1279 4.
This document contains other aspects of importance for trade.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17635:2023(Main)
Glass in buildig - Shatter properties - Requirements and assessment methods
EN 17635:2022

This document gives test methods to assess the shatter properties of different types of monolithic flat glass for use in building and construction works, for which a specific fragmentation pattern is required when tested under defined conditions.
NOTE   Thermally treated monolithic glass are products for which such requirement exists.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12543-5:2022(Main)
Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021)
EN ISO 12543-5:2021

This document specifies dimensions, limit deviations and edge finishes of laminated glass and laminated
safety glass for use in building.
This document is not applicable to panes having an area less than 0,05 m2.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12543-2:2022(Main)
Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2022)
EN ISO 12543-2:2021

This document specifies performance requirements for laminated safety glass as defined in ISO 12543-
1.
NOTE Any defects that are found in installed laminated safety glass are dealt with in ISO 12543-6

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12543-1:2022(Main)
Glass in building - Laminated glass and laminated safety glass - Part 1: Vocabulary and description of component parts (ISO 12543-1:2021)
EN ISO 12543-1:2021

This document defines terms and describes component parts for laminated glass and laminated safety
glass for use in building.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12543-3:2022(Main)
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2021)
EN ISO 12543-3:2021

This document specifies performance requirements for laminated glass as defined in ISO 12543-1.
NOTE Any defects that are found in installed laminated safety glass are dealt with in ISO 12543-6.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12543-4:2022(Main)
Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2021)
EN ISO 12543-4:2021

This document specifies test methods relating to resistance to high temperature, humidity and
radiation for laminated glass and laminated safety glass for use in building.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12543-6:2022(Main)
Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:2021)
EN ISO 12543-6:2021

This document specifies defects of finished sizes and test methods with regard to the appearance of
laminated glass and laminated safety glass when looking through the glass.
All references to laminated glass in this document refer to both laminated glass and laminated safety
glass.
NOTE Special attention is paid to acceptability criteria in the vision area.
This document is applicable to finished sizes at the time of supply.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 19100-3:2022(Main)
Design of glass structures - Part 3: Design of in-plane loaded glass components and their mechanical joints
CEN/TS 19100-3:2021

1.1      Scope of CEN/TS 19100 3
(1) This document gives design rules for mechanically supported glass components primarily subjected to in-plane loading. It also covers construction rules for mechanical joints for in-plane loaded glass components.
NOTE   In-plane loaded glass elements are primarily subjected to in-plane loads, e.g. transferred from adjacent parts of a structure. They can also be subjected to out-of-plane loading.
1.2      Assumptions
(1) The assumptions of EN 1990 apply to this document.
(2) This document is intended to be used in conjunction with EN 1990, EN 1991 (all parts), EN 1993-1-1, EN 1995 1 1, EN 1998 1, EN 1999 1 1 and EN 12488.

  • Technical specification
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day