SIST EN 62149-8:2015
(Main)Fibre optic active components and devices - Performance standard - Part 8: Seeded reflective semiconductor optical amplifier devices (IEC 62149-8:2014)
Fibre optic active components and devices - Performance standard - Part 8: Seeded reflective semiconductor optical amplifier devices (IEC 62149-8:2014)
This part of IEC 62149 covers the performance specification for seeded reflective
semiconductor optical amplifier (RSOA) devices used for fibre optic telecommunication and
optical data transmission applications. The performance standard contains a definition of the
product performance requirements together with a series of sets of tests and measurements
with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be
run on a “once-off” basis to prove any product’s ability to satisfy the performance standard’s
requirements.
A product that has been shown to meet all the requirements of a performance standard can
be declared as complying with the performance standard, but should then be controlled by a
quality assurance/quality conformance program.
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 8: Injizierte reflektierende optische Halbleiterverstärker (IEC 62149-8:2014)
Composants et dispositifs actifs à fibres optiques - Normes de performances - Partie 8: Dispositifs amplificateurs optiques à semiconducteurs réfléchissants répartis (CEI 62149-8:2014)
L'IEC 62149-8:2014 couvre la spécification de performance des dispositifs amplificateurs optiques à semiconducteurs réfléchissants (RSOA) répartis utilisés pour les applications de télécommunication à fibres optiques et de transmission de données par moyen optique. La norme de performance contient une définition des exigences de performance de produit ainsi qu'une série de jeux d'essais et de mesures avec des conditions, sévérités et critères d'acceptation/de refus bien définis. Les essais sont destinés à être effectués une seule fois, pour prouver la capacité du produit à satisfaire aux exigences des normes de performance. Un produit dont on a montré qu'il remplissait toutes les exigences d'une norme de performance peut être déclaré comme conforme à une norme de performance, mais il convient qu'il soit ensuite contrôlé selon un programme d'assurance de la qualité/de conformité de la qualité. Mots clés : dispositifs amplificateurs optiques à semiconducteurs réfléchissants (RSOA) répartis
Aktivne komponente in naprave optičnih vlaken - Izvedbeni standard - 8. del: Oddajno-sprejemne naprave z dopiranimi odsevnimi polprevodniškimi optičnimi ojačevalniki (IEC 62149-8:2014)
Ta del standarda IEC 62149 obravnava izvedbeno specifikacijo za oddajno-sprejemne module z dopiranimi odsevnimi polprevodniškimi optičnimi ojačevalniki (RSOA) za uporabo na področju telekomunikacij z optičnimi vlakni in optičnega prenosa podatkov. Izvedbeni standard vsebuje opredelitev zahtev glede zmogljivosti za izdelek skupaj z naborom serij preskusov in meritev z jasno določenimi pogoji, stopnjami zahtevnosti in merili za uspešno/neuspešno opravljen preskus. Preskusi so namenjeni enkratnemu izvajanju, z njimi pa se dokaže, ali lahko izdelek izpolnjuje zahteve tehničnega standarda.
Izdelek, ki dokazano izpolnjuje vse zahteve izvedbenega standarda, je mogoče šteti za skladen z izvedbenim standardom, vendar naj bi ga v tem primeru nadzoroval program za zagotavljanje skladnosti/skladnost s kakovostjo.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 8: Injizierte reflektierende optische Halbleiterverstärker (IEC 62149-8:2014)Composants et dispositifs actifs à fibres optiques - Normes de performances - Partie 8: Dispositifs amplificateurs optiques à semiconducteurs réfléchissants répartis (CEI 62149-8:2014)Fibre optic active components and devices - Performance standard - Part 8: Seeded reflective semiconductor optical amplifier devices (IEC 62149-8:2014)33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 62149-8:2014SIST EN 62149-8:2015en,fr,de01-april-2015SIST EN 62149-8:2015SLOVENSKI
STANDARD
SIST EN 62149-8:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 62149-8
June 2014 ICS 33.180.20
English Version
Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor optical amplifier devices (IEC 62149-8:2014)
Composants et dispositifs actifs à fibres optiques - Normes de performances - Partie 8: Dispositifs amplificateurs optiques à semiconducteurs réfléchissants répartis (CEI 62149-8:2014)
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 8: Injizierte reflektierende optische Halbleiterverstärker (IEC 62149-8:2014) This European Standard was approved by CENELEC on 2014-05-29. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62149-8:2014 E SIST EN 62149-8:2015
EN 62149-8:2014 - 2 -
Foreword The text of document 86C/1144/CDV, future edition 1 of IEC 62149-8, prepared by SC 86C, "Fibre optic systems and active devices", of IEC TC 86, "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62149-8:2014. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-02-28 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-05-29
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62149-8:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60191 (all parts) NOTE Harmonized as EN 60191 (all parts). IEC 60747-5-1 NOTE Harmonized as EN 60747-5-1. IEC 60749 (all parts) NOTE Harmonized as EN 60749 (all parts). IEC 60825 (all parts) NOTE Harmonized as EN 60825 (all parts). IEC 60874 (all parts) NOTE Harmonized as EN 60874 (all parts). IEC 61290-1-3 NOTE Harmonized as EN 61290-1-3. IEC 62007-1 NOTE Harmonized as EN 62007-1. IEC 62007-2 NOTE Harmonized as EN 62007-2. IEC 62148-1 NOTE Harmonized as EN 62148-1. IEC 62149-1 NOTE Harmonized as EN 62149-1.
SIST EN 62149-8:2015
- 3 - EN 62149-8:2014 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60749-6 -
Semiconductor devices - Mechanical and climatic test methods --
Part 6: Storage at high temperature EN 60749-6 -
IEC 60749-7 -
Semiconductor devices - Mechanical and climatic test methods --
Part 7: Internal moisture content measurement and the analysis of other residual gases EN 60749-7 -
IEC 60749-10 -
Semiconductor devices - Mechanical and climatic test methods --
Part 10: Mechanical shock EN 60749-10 -
IEC 60749-11 -
Semiconductor devices - Mechanical and climatic test methods --
Part 11: Rapid change of temperature - Two-fluid-bath method EN 60749-11 -
IEC 60749-12 -
Semiconductor devices - Mechanical and climatic test methods --
Part 12: Vibration, variable frequency EN 60749-12 -
IEC 60749-25 -
Semiconductor devices - Mechanical and climatic test methods --
Part 25: Temperature cycling EN 60749-25 -
IEC 60749-26 -
Semiconductor devices - Mechanical and climatic test methods --
Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM) EN 60749-26 -
IEC 60825-1 -
Safety of laser products -
Part 1: Equipment classification and requirements EN 60825-1 -
IEC 60950-1 -
Information technology equipment - Safety --
Part 1: General requirements EN 60950-1 -
IEC 61300-2-4 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures --
Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 -
SIST EN 62149-8:2015
EN 62149-8:2014 - 4 -
Publication Year Title EN/HD Year
IEC 61300-2-19 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures --
Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 -
IEC 61300-2-48 -
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures --
Part 2-48: Tests - Temperature-humidity cycling EN 61300-2-48 -
IEC Guide 107 -
Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications - -
SIST EN 62149-8:2015
IEC 62149-8 Edition 1.0 2014-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic active components and devices – Performance standards – Part 8: Seeded reflective semiconductor optical amplifier devices
Composants et dispositifs actifs à fibres optiques – Normes de performances – Partie 8: Dispositifs amplificateurs optiques à semiconducteurs réfléchissants répartis
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE N ICS 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-8322-1543-2
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN 62149-8:2015
– 2 – IEC 62149-8:2014 © IEC 2014 CONTENTS
FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms, definitions, symbols and abbreviations . 7 3.1 Terms and definitions . 7 3.2 Symbols and abbreviations . 7 4 Product parameters . 8 4.1 Absolute limiting ratings . 8 4.2 Operating environment . 8 4.3 Functional specification. 8 5 Testing . 8 5.1 General . 8 5.2 Characterization testing . 8 5.3 Performance testing . 9 6 Environmental specifications . 9 6.1 General safety . 9 6.2 Laser safety . 9 6.3 Electromagnetic compatibility (EMC) requirements. 9 Annex A (normative)
Specifications for seeded RSOA devices . 10 A.1 Absolute limiting ratings . 10 A.2 Operating environment . 10 A.3 Functional specification. 10 A.4 Testing . 11 A.4.1 Characterization testing . 11 A.4.2 Performance testing. 11 Bibliography . 14
Figure 1 – Seeded DWDM transmission based on RSOA devices . 5
Table 1 – Operating environment . 8 Tableau A.1 – Absolute limiting ratings . 10 Tableau A.2 – Operating conditions for functional specification . 10 Tableau A.3 – Functional specification . 11 Tableau A.4 – Performance test plan . 12 Tableau A.5 – Recommended performance test failure criteria . 13
SIST EN 62149-8:2015
IEC 62149-8:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PERFORMANCE STANDARDS –
Part 8: Seeded reflective semiconductor optical amplifier devices
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62149-8 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. The text of this standard is based on the following documents: CDV Report on voting 86C/1144/CDV 86C/1221/RVC
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. SIST EN 62149-8:2015
– 4 – IE
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.