SIST EN 3155-009:2025
(Main)Aerospace Series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
Aerospace Series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 009, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-008.
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 009: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 009 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
Le présent document spécifie les caractéristiques requises, les essais et l’outillage applicables aux contacts électriques femelles 009, de type A, à sertir, de classe S, utilisés dans les organes de connexion appartenant à l’EN 3155 002.
Il est utilisé conjointement avec l’EN 3155 001.
Les contacts mâles associés sont spécifiés dans l’EN 3155 008.
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 009. del: Električni kontakti, ženski, tip A, nagubani, razred S - Standard za proizvod
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2025
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 009. del:
Električni kontakti, ženski, tip A, nagubani, razred S - Standard za proizvod
Aerospace Series - Electrical contacts used in elements of connection - Part 009:
Contacts, electrical, female, type A, crimp, class S - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 009: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
009 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
Ta slovenski standard je istoveten z: EN 3155-009:2025
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 3155-009
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2025
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3155-009:2019
English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 009: Contacts, electrical, female 009,
type A, crimp, class S - Product standard
Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 009 : Contacts Verwendung in Verbindungselementen - Teil 009:
électriques, femelles 009, type A, à sertir, classe S - Elektrische Buchsenkontakte 009, Typ A, crimpbar,
Norme de produit Klasse S - Produktnorm
This European Standard was approved by CEN on 25 November 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-009:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 7
4 Required characteristics . 7
4.1 Specific characteristics . 7
4.2 Dimensions and mass . 7
4.3 Marking by colour code . 13
4.4 Material, surface treatment . 13
4.5 Permissible cables . 13
4.6 Tooling . 15
4.6.1 Crimping tools . 15
4.6.2 Insertion/extraction tools . 16
4.7 Cable stripping . 17
4.8 Tests . 17
4.9 Gauges . 21
5 Designation . 21
6 Marking . 21
7 Technical specification . 21
Bibliography . 22
European foreword
This document (EN 3155-009:2025) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2025, and conflicting national
standards shall be withdrawn at the latest by September 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3155-009:2019.
This document includes the following significant technical changes with respect to
EN 3155-009:2019:
— normative references updated;
— footnote added for diameters E and G in Figure 1;
— remarks modified in Table 8, test EN 2591-403 (sinusoidal and random vibration).
Any feedback and questions on this document should be directed to the users’ national standards
body. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Türkiye and the United Kingdom.
1 Scope
This document specifies the required characteristics, tests and tooling applicable to female electrical
contacts 009, type A, crimp, class S, used in elements of connection pertaining to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-008.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper and copper alloys conductors for electrical cables — Product
standard
EN 2591-101, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 101: Visual examination
EN 2591-102, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 102: Examination of dimensions and mass
EN 2591-201, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 201: Contact resistance — Low level
EN 2591-202, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 202: Contact resistance at rated current
EN 2591-203, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 203: Electrical continuity at microvolt level
EN 2591-204, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 204: Discontinuity of contacts in the microsecond range
EN 2591-206, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 206: Measurement of insulation resistance
EN 2591-207, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 207: Voltage proof test
EN 2591-210, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 210: Electrical overload
EN 2591-211, Aerospace series — Elements of electrical and optical connection — Test Methods —
Part 211: Capacitance
EN 2591-212, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 212: Surface transfer impedance
EN 2591-213, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 213: Shielding effectiveness from 100 MHz to 1 GHz
EN 2591-220, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 220: Contact/conductor joint ageing by current and temperature cycling
EN 2591-221, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 221: Voltage Standing Wave Ratio (VSWR)
EN 2591-222, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 222: Insertion Loss (I.L.)
EN 2591-223, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 223: Measurement of characteristic impedance of a coaxial connector or contact
EN 2591-305, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 305: Rapid change of temperature
EN 2591-306, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 306: Mould growth
EN 2591-307, Aerospace series — Elements of electrical and optical connection; test methods — Part 307:
Salt mist
EN 2591-315, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 315: Fluid resistance
EN 2591-316, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 316: Ozone resistance
EN 2591-319, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 319: Gastightness of solderless wrapped connections
EN 2591-402, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 402: Shock
EN 2591-403, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 403: Sinusoidal and random vibration
EN 2591-406, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 406: Mechanical endurance
EN 2591-415, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 415: Test probe damage (female contacts)
EN 2591-416, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 416: Contact bending strength
EN 2591-417, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 417: Tensile strength (crimped connection)
EN 2591-418, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 418: Gauge insertion/extraction forces (female contacts)
EN 2591-424, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 424: Stripping force, solderless wrapped connections
EN 2591-425, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 425: Unwrapping capability, solderless wrapped connections
EN 2591-501, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 501: Soft solderability
EN 2591-502, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 502: Restricted entry
EN 2591-503, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 503: Contact deformation after crimping
EN 2591-507, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 507: Plating porosity
EN 2591-508, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 508: Measurement of thickness of coating on contacts
EN 2591-509, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 509: Adhesion of coating on contacts
EN 2591-513, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 513: Magnetic permeability
EN 2591-51
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.