F08.67 - Pole Vault

ABSTRACT
This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault box collars. With the required minimum dimensions, maximum thickness, maximum dimensions of box collar cutout, minimum dimensions of box collar cutout a pole vault box collars shall be tested under ambient conditions that match those of intended use. The pole vault box collar shall be tested using the impact testing procedures for Installed Surface Performance Test (Field Test) of ASTM F1292.
SCOPE
1.1 This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault box collars.2  
1.2 Units—The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SIGNIFICANCE AND USE
6.1 The dynamic data obtained with the procedures given in this specification measure the cushioning properties of the pole vault landing systems tested.  
6.2 The size of the pole vault landing system is specified with respect to the kinematics of body movement.
SCOPE
1.1 This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault landing systems.  
1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ABSTRACT
This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault box collars. With the required minimum dimensions, maximum thickness, maximum dimensions of box collar cutout, minimum dimensions of box collar cutout a pole vault box collars shall be tested under ambient conditions that match those of intended use. The pole vault box collar shall be tested using the impact testing procedures for Installed Surface Performance Test (Field Test) of ASTM F1292.
SCOPE
1.1 This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault box collars.2  
1.2 Units—The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ABSTRACT
This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault box collars. With the required minimum dimensions, maximum thickness, maximum dimensions of box collar cutout, minimum dimensions of box collar cutout a pole vault box collars shall be tested under ambient conditions that match those of intended use. The pole vault box collar shall be tested using the impact testing procedures for Installed Surface Performance Test (Field Test) of ASTM F1292.
SCOPE
1.1 This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault box collars.2  
1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ABSTRACT
This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault box collars. With the required minimum dimensions, maximum thickness, maximum dimensions of box collar cutout, minimum dimensions of box collar cutout a pole vault box collars shall be tested under ambient conditions that match those of intended use. The pole vault box collar shall be tested using the impact testing procedures for Installed Surface Performance Test (Field Test) of ASTM F1292.
SCOPE
1.1 This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault box collars.  
1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SIGNIFICANCE AND USE
The dynamic data obtained with the procedures given in this specification measure the cushioning properties of the pole vault landing systems tested.
The size of the pole vault landing system is specified with respect to the kinematics of body movement.
SCOPE
1.1 This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault landing systems.
1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ABSTRACT
This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault landing pads intended for users. Overall dimensions must be based on the kinematics of the human body and the shock-absorbing quality of the material. They must also be based on the comfort and safety of the user. Impact test shall be performed in accordance with the requirements specified. The size of the pole vault landing pit is specified with respect to the kinematics of body movement.
SCOPE
1.1 This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault landing pads intended for users up to 19 ft (5.74 m).
1.2 The values as stated in inch-pound units are to be regarded as the standard. The values in parentheses are given for information only.
1.3 The following safety hazards caveat pertains only to the test methods portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
WITHDRAWN RATIONALE
This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault landing pads intended for users up to 19 ft (5.74 m).
Formerly under the jurisdiction of Committee F08 on Sports Equipment and Facilities, this specification was withdrawn in April 2011 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.