D10.11 - Terminology (definitions)

SCOPE
1.1 This terminology is a compilation of definitions of technical terms used in the packaging and distribution environments. Terms that are generally understood or adequately found in other readily available sources are not included.  
1.2 A definition is a single sentence with additional information included in discussions.  
1.3 Definitions that are identical to those published by another standards organization or ASTM committee are identified with the name of the organization or ASTM committee.  
1.4 The definitions in this terminology are grouped into related areas under principal concepts. The broad descriptor term for each group is followed in alphabetical order by narrower terms and related terms. Cross-references are included where the concept group is not obvious.  
1.5 Terminology related to flexible barrier packaging is found in Terminology F17.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SCOPE
1.1 The terms and definitions in this standard are related to Electrostatic Discharge (ESD) Packaging Materials and ESD Protective Materials.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SIGNIFICANCE AND USE
4.1 Packages are often marked with handling instructions in the language of the country of origin. While this may safeguard the consignment to some extent, it is of little value for goods consigned to, or through, countries using different languages, and of no value at all if people unloading the packages are illiterate. Pictorial symbols offer the most likely means of conveying the consignor’s intention and their adoption will, therefore, undoubtedly reduce loss and damage through incorrect handling. The use of pictorial symbols does not provide any guarantee of satisfactory handling; proper protective packaging is therefore of primary importance.
SCOPE
1.1 This practice establishes a set of symbols to be used for marking of packages or containers to indicate special handling and storage requirements.  
1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SCOPE
1.1 This terminology is a compilation of definitions of technical terms used in the packaging and distribution environments. Terms that are generally understood or adequately found in other readily available sources are not included.  
1.2 A definition is a single sentence with additional information included in discussions.  
1.3 Definitions that are identical to those published by another standards organization or ASTM committee are identified with the name of the organization or ASTM committee.  
1.4 The definitions in this terminology are grouped into related areas under principal concepts. The broad descriptor term for each group is followed in alphabetical order by narrower terms and related terms. Cross-references are included where the concept group is not obvious.  
1.5 Terminology related to flexible barrier packaging is found in Terminology F17.

SCOPE
1.1 The terms in this standard are related to paper and paper products.

SIGNIFICANCE AND USE
4.1 Packages are often marked with handling instructions in the language of the country of origin. While this may safeguard the consignment to some extent, it is of little value for goods consigned to, or through, countries using different languages, and of no value at all if people unloading the packages are illiterate. Pictorial symbols offer the most likely means of conveying the consignor's intention and their adoption will, therefore, undoubtedly reduce loss and damage through incorrect handling. The use of pictorial symbols does not provide any guarantee of satisfactory handling; proper protective packaging is therefore of primary importance.
SCOPE
1.1 This practice establishes a set of symbols to be used for marking of packages or containers to indicate special handling and storage requirements.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 The terms and definitions in this standard are related to Electrostatic Discharge (ESD) Packaging Materials and ESD Protective Materials.

SIGNIFICANCE AND USE
Packages are often marked with handling instructions in the language of the country of origin. While this may safeguard the consignment to some extent, it is of little value for goods consigned to, or through, countries using different languages, and of no value at all if people unloading the packages are illiterate. Pictorial symbols offer the most likely means of conveying the consignor's intention and their adoption will, therefore, undoubtedly reduce loss and damage through incorrect handling. The use of pictorial symbols does not provide any guarantee of satisfactory handling; proper protective packaging is therefore of primary importance.
SCOPE
1.1 This practice establishes a set of symbols to be used for marking of packages or containers to indicate special handling and storage requirements.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SIGNIFICANCE AND USE
Packages are often marked with handling instructions in the language of the country of origin. While this may safeguard the consignment to some extent, it is of little value for goods consigned to, or through, countries using different languages, and of no value at all if people unloading the packages are illiterate. Pictorial symbols offer the most likely means of conveying the consignor's intention and their adoption will, therefore, undoubtedly reduce loss and damage through incorrect handling. The use of pictorial symbols does not provide any guarantee of satisfactory handling; proper protective packaging is therefore of primary importance.
SCOPE
1.1 This practice establishes a set of symbols to be used for marking of packages or containers to indicate special handling and storage requirements.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This terminology is a compilation of definitions of technical terms used in the packaging and distribution environments. Terms that are generally understood or adequately found in other readily available sources are not included.
1.2 A definition is a single sentence with additional information included in discussions.
1.3 Definitions that are identical to those published by another standards organization or ASTM committee are identified with the name of the organization or ASTM committee.
1.4 The definitions in this terminology are grouped into related areas under principal concepts. The broad discriptor term for each group is followed in alphabetical order by narrower terms and related terms. Cross-references are included where the concept group is not obvious.

SCOPE
1.1 This terminology is a compilation of definitions of technical terms used in the packaging and distribution environments. Terms that are generally understood or adequately found in other readily available sources are not included.
1.2 A definition is a single sentence with additional information included in discussions.
1.3 Definitions that are identical to those published by another standards organization or ASTM committee are identified with the name of the organization or ASTM committee.
1.4 The definitions in this terminology are grouped into related areas under principal concepts. The broad discriptor term for each group is followed in alphabetical order by narrower terms and related terms. Cross-references are included where the concept group is not obvious.

SIGNIFICANCE AND USE
Packages are often marked with handling instructions in the language of the country of origin. While this may safeguard the consignment to some extent, it is of little value for goods consigned to, or through, countries using different languages, and of no value at all if people unloading the packages are illiterate. Pictorial symbols offer the most likely means of conveying the consignor’intention and their adoption will, therefore, undoubtedly reduce loss and damage through incorrect handling. The use of pictorial symbols does not provide any guarantee of satisfactory handling; proper protective packaging is therefore of primary importance.
SCOPE
1.1 This practice establishes a set of symbols to be used for marking of packages or containers to indicate special handling and storage requirements.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This terminology is a compilation of definitions of technical terms used in the packaging and distribution environments. Terms that are generally understood or adequately found in other readily available sources are not included.
1.2 A definition is a single sentence with additional information included in discussions.
1.3 Definitions that are identical to those published by another standards organization or ASTM committee are identified with the name of the organization or ASTM committee.
1.4 The definitions in this terminology are grouped into related areas under principal concepts. The broad discriptor term for each group is followed in alphabetical order by narrower terms and related terms. Cross-references are included where the concept group is not obvious.

SCOPE
1.1 This practice establishes a set of symbols to be used for marking of packages or containers to indicate special handling and storage requirements.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This practice establishes a set of symbols to be used for marking of packages or containers to indicate special handling and storage requirements.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This practice establishes a set of symbols to be used for marking of packages or containers to indicate special handling and storage requirements.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This terminology is a compilation of definitions of technical terms used in the packaging and distribution environments. Terms that are generally understood or adequately found in other readily available sources are not included.
1.2 A definition is a single sentence with additional information included in discussions.
1.3 Definitions that are identical to those published by another standards organization or ASTM committee are identified with the name of the organization or ASTM committee.
1.4 The definitions in this terminology are grouped into related areas under principal concepts. The broad descriptor term for each group is followed in alphabetical order by narrower terms and related terms. Cross-references are included where the concept group is not obvious.

SCOPE
1.1 This terminology is a compilation of definitions of technical terms used in the packaging and distribution environments. Terms that are generally understood or adequately found in other readily available sources are not included.
1.2 A definition is a single sentence with additional information included in discussions.
1.3 Definitions that are identical to those published by another standards organization or ASTM committee are identified with the name of the organization or ASTM committee.
1.4 The definitions in this terminology are grouped into related areas under principal concepts. The broad discriptor term for each group is followed in alphabetical order by narrower terms and related terms. Cross-references are included where the concept group is not obvious.

SCOPE
1.1 This practice establishes a set of symbols to be used for marking of packages or containers to indicate special handling and storage requirements.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This practice establishes a set of symbols to be used for marking of packages or containers to indicate special handling and storage requirements.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.