F15.49 - Pool Safety Standards

SCOPE
1.1 This specification outlines the performance and design requirements for removable mesh safety barriers used for barriers for swimming pools, hot tubs, and spas to reduce the incidence of injuries or death for infants and children up to and including five years of age.  
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ABSTRACT
This specification deals with the performance requirements for pool alarms for residential swimming pools and spas. This specification covers devices that provide for rapid and automatic detection and alarm in cases of unintentional, unsupervised or accidental entry of a child one year of age or older into the water of swimming pools or spas. This specification is not intended to replace other standard safety requirements that should be in place, that is, adult supervision, fences, gates, locks, and so forth. This specification covers four different types of alarms: Type A, Surface—Pool alarm floating on water surface; Type B, Subsurface—Pool alarm located below the water surface; Type C, Pool Perimeter—Pool alarm located such as to detect movement at the perimeter of or above the water surface; and Type D, Personal Immersion Alarm—Pool alarm device located on the person(s).
SCOPE
1.1 This safety specification covers safety and performance requirements for pool alarms for residential swimming pools and spas.  
1.2 This safety specification describes devices intended to improve personal safety and reduce injuries or deaths.  
1.3 This safety specification covers devices that provide for rapid and automatic detection and alarm in cases of unintentional, unsupervised or accidental entry of a child one year of age or older into the water of swimming pools or spas.  
1.4 This safety specification is not intended to replace other standard safety requirements that should be in place, that is, adult supervision, fences, gates, locks, and so forth.  
1.5 This safety specification covers four different types of alarms.  
1.6 The detection criteria for this safety specification is for a child one year of age and older.  
1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

SCOPE
1.1 This specification outlines the performance and design requirements for removable mesh safety barriers used for barriers for swimming pools, hot tubs, and spas to reduce the incidence of injuries or death for infants and children up to and including five years of age.  
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

ABSTRACT
This specification deals with the performance requirements for pool alarms for residential swimming pools and spas. This specification covers devices that provide for rapid and automatic detection and alarm in cases of unintentional, unsupervised or accidental entry of a child one year of age or older into the water of swimming pools or spas. This specification is not intended to replace other standard safety requirements that should be in place, that is, adult supervision, fences, gates, locks, and so forth. This specification covers four different types of alarms: Type A, Surface—Pool alarm floating on water surface; Type B, Subsurface—Pool alarm located below the water surface; Type C, Pool Perimeter—Pool alarm located such as to detect movement at the perimeter of or above the water surface; and Type D, Personal Immersion Alarm—Pool alarm device located on the person(s).
SCOPE
1.1 This safety specification covers safety and performance requirements for pool alarms for residential swimming pools and spas.  
1.2 This safety specification describes devices intended to improve personal safety and reduce injuries or deaths.  
1.3 This safety specification covers devices that provide for rapid and automatic detection and alarm in cases of unintentional, unsupervised or accidental entry of a child one year of age or older into the water of swimming pools or spas.  
1.4 This safety specification is not intended to replace other standard safety requirements that should be in place, that is, adult supervision, fences, gates, locks, and so forth.  
1.5 This safety specification covers four different types of alarms.  
1.6 The detection criteria for this safety specification is for a child one year of age and older.  
1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This specification outlines the performance and design requirements for removable mesh safety barriers used for barriers for swimming pools, hot tubs, and spas to reduce the incidence of injuries or death for infants and children up to and including five years of age.  
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

ABSTRACT
This specification deals with the performance requirements for pool alarms for residential swimming pools and spas. This specification covers devices that provide for rapid and automatic detection and alarm in cases of unintentional, unsupervised or accidental entry of a child one year of age or older into the water of swimming pools or spas. This specification is not intended to replace other standard safety requirements that should be in place, that is, adult supervision, fences, gates, locks, and so forth. This specification covers four different types of alarms: Type A, Surface—Pool alarm floating on water surface; Type B, Subsurface—Pool alarm located below the water surface; Type C, Pool Perimeter—Pool alarm located such as to detect movement at the perimeter of or above the water surface; and Type D, Personal Immersion Alarm—Pool alarm device located on the person(s).
SCOPE
1.1 This safety specification covers safety and performance requirements for pool alarms for residential swimming pools and spas.
1.2 This safety specification describes devices intended to improve personal safety and reduce injuries or deaths.
1.3 This safety specification covers devices that provide for rapid and automatic detection and alarm in cases of unintentional, unsupervised or accidental entry of a child one year of age or older into the water of swimming pools or spas.
1.4 This safety specification is not intended to replace other standard safety requirements that should be in place, that is, adult supervision, fences, gates, locks, and so forth.
1.5 This safety specification covers four different types of alarms.
1.6 The detection criteria for this safety specification is for a child one year of age and older.
1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This specification covers performance requirements for pool alarms for residential swimming pools and spas.
1.2 This specification is intended to describe devices intended to improve personal safety and reduce injuries or deaths.
1.3 This specification covers devices that provide for rapid and automatic detection and alarm in cases of unintentional, unsupervised or accidental entry of a child one year of age or older into the water of swimming pools or spas.
1.4 This specification is not intended to replace other standard safety requirements that should be in place, that is, adult supervision, fences, gates, locks, and so forth.
1.5 This specification covers four different types of alarms.
1.6 The detection criteria for this standard is for a child one year of age and older.
1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This specification outlines the performance and design requirements for removable mesh safety barriers used for barriers for swimming pools, hot tubs, and spas to reduce the incidence of injuries or death for infants and children up to and including five years of age.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

SCOPE
1.1 This standard is intended to provide performance requirements for pool alarms for residential swimming pools and spas.
1.2 This standard is intended to describe devices intended to improve personal safety and reduce injuries or deaths.
1.3 This standard covers devices that provide for rapid and automatic detection and alarm in cases of unintentional, unsupervised or accidental entry of a child one year of age or older into the water of swimming pools or spas.
1.4 This standard is not intended to replace other standard safety requirements that should be in place, that is, adult supervision, fences, gates, locks, and so forth.
1.5 This standard covers four different types of alarms.
1.6 The detection criteria for this standard is for a child one year of age and older.

SCOPE
1.1 This standard is intended to provide performance requirements for pool alarms for residential swimming pools and spas.
1.2 This standard is intended to describe devices intended to improve personal safety and reduce injuries or deaths.
1.3 This standard covers devices that provide for rapid and automatic detection and alarm in cases of unintentional, unsupervised or accidental entry of a child one year of age or older into the water of swimming pools or spas.
1.4 This standard is not intended to replace other standard safety requirements that should be in place, that is, adult supervision, fences, gates, locks, and so forth.
1.5 This standard covers four different types of alarms.
1.6 The detection criteria for this standard is for a child one year of age and older.

SCOPE
1.1 This guide provides a safety audit system for the evaluation of residential pools, spas, and hot tubs based on a layers-of-protection approach to reduce the incidence of drowning involving young children.
1.2 This guide addresses the hazard of unintentional or unsupervised entry of young children into the water of pools, spas, and hot tubs.
1.3 This guide does not address all of the hazards present when a swimming pool, spa, or hot tub is considered not operational, that is, no intent of being used for an extended period of time for reasons such as closed for the season.
1.4 The values given in inch-pound units are to be considered the standard. The values given in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
WITHDRAWN RATIONALE
This guide provides a safety audit system for the evaluation of residential pools, spas, and hot tubs based on a layers-of-protection approach to reduce the incidence of drowning involving young children.
Formerly under the jurisdiction of Committee F15 on Consumer Products, this guide was withdrawn in January 2015 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.