IEC/TC 39 - IEC_TC_39

Applicable to cathode ray tubes and cathode ray tube assemblies which are intended for use as components in apparatus and which have integral protection with respect to the effects of implosion. A CRT covered by this standard is intended to be installed in an enclosure designed both to protect the rear of the CRT against mechanical or other damage under normal conditions of operation and to protect the user against particles expelled in a backwards direction from the CRT face in the event of implosion.

Gives guidance on the preparation of outline drawings of cathode ray tubes with the object of encouraging the same practice when publications are prepared in different countries.

Gives dimensions and tolerances for electronic tube and valve bases, holders and caps, together with the relevant gauges and gauging procedure, to ensure interchangeability. Also includes recommended practice for the preparation of drawings of electronic tubes and valves. This is a loose-leaf publication and supplements, containing new or revised sheets, are issued from time to time.

Applies to multi-electrode tubes, with the exception of cathode-ray tubes. Describes the system used for numbering the electrodes of the same type multi-electrode tubes and for assigning designations to the units of multiple-unit tubes.

Applies to the measurement of the direct interelectrode capacitances of electronic tubes of the following types: receiving tubes, cathode-ray tubes, gas tube and gas-filled valves, phototubes, photocells and multiplier types, high-power vacuum tubes.

This document applies to image converter and image intensifier tubes of assessed quality.

This document applies to camera tubes of assessed quality.

This document is a blank detail specification for Cathode Ray Tubes relating to the generic specification printed as CECC 11 00.

This document relates to photomultiplier tubes of assessed quality.

This document applies to cathode ray tubes of assessed quality.

Supersedes CECC 11 101:1984 * CECC WG 11 work handled by SR 39 * 2013-02-07: Transfer from SR 39 to SR 110 requested by NEN - Situation to be checked

This document relates to display storage tubes of assessed quality.

This document is a blank detail specification for the image converter and image intensifier tubed relating t the generic specification printed as CECC 12000.

Supersedes CECC 14 001 Issue 1:1984 * CECC WG 11 work handled by SR 39 * 2013-02-07: Transfer from SR 39 to SR 110 requested by NEN - Situation to be checked

Supersedes CECC 13 001 Issue 1:1980 * CECC WG 11 work handled by SR 39 * 2013-02-07: Transfer from SR 39 to SR 110 requested by NEN - Situation to be checked