CLC/SR 110 - Flat panel display devices

IEC 61747-10-1:2013 lists test methods applicable to liquid crystal display devices. It takes into account, wherever possible, the mechanical robustness test methods as outlined in IEC 60068. The object of this standard is to establish uniform preferred test methods with preferred values for stress levels for judging the mechanical properties of liquid crystal display devices. This first edition of IEC 61747-10-1 cancels and replaces Clauses 1 and 2 of the first edition of IEC 61747-5 published in 1998. This edition constitutes a technical revision.

IEC 62595-1-1:2013 is a generic specification for backlight unit (BLU) for liquid crystal displays. It defines general procedures for quality assessment and gives general rules for the measuring methods of electrical and optical characteristics, rules for climatic and mechanical tests, and rules for endurance tests.

IEC 61747-2-1:2013 serves as a Blank Detail Specification (BDS) for a high quality approval system and contains requirements for style and layout and minimum content of detail specifications. These requirements are applicable when the detail specification is published (e.g. for standard product). This second edition of IEC 61747-2-1 cancels and replaces the first edition published in 1998, and constitutes a technical revision. The main changes from the previous edition are as follows: - several words and test conditions were added in Clause 7 and Clause 8; - the new edition was editorially changed according to the current ISO/IEC Directives - Part 2.

IEC 61747-4:2012 describes the essential ratings and characteristics of LCD cells and passive matrix monochrome liquid crystal display modules. It does not apply to active matrix LCD cells nor to multicolour cells. This edition includes the following significant technical changes with respect to the previous edition: - 2.1 and 3.1 of IEC 61747-4:1998 were deleted because these items are defined in IEC 61747-1; - 2.7.6, in 2.7, Supplementary information, of IEC 61747-4:1998 was deleted because the scope of this standard is about passive matrix monochrome liquid crystal display modules; - The item 'Gray scale: digital or analog' in 2.3.1 of IEC 61747-4:1998 was changed to 'Gray scale: number' because it is more accurate; - Contrast mode: light symbol on dark background ('LOD' or 'positive image') or dark symbol on light background ('DOL' or 'negative image') was introduced in this part of IEC 61747 to replace the description in 2.3.1 and 3.3.1 of IEC 61747-4:1998.

IEC 61747-30-1:2012 is restricted to transmissive liquid crystal display-modules using either segment, passive or active matrix and achromatic or colour type LCDs. Furthermore, the transmissive modes of transflective LCD modules with backlights ON are comprised in this document. An LCD module in combination with a touch-panel or a front-light-unit is excluded from the scope because measurements are frequently inaccurate. Touch-panels or front-light-units are removed before measurement. Throughout the main body of this standard, an integrated backlight is assumed to provide the illumination for the measurements. Deviations from this (e.g. segmented displays without integrated backlights) may usually be handled in the same way as display modules with integrated backlight, if an external backlight is provided. However, in the case where one of the two situations should be handled differently, this will be specifically stated. This first edition cancels and replaces IEC 61747-6 published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the document structure was brought in line with 61747-6-2; and b) various technical and editorial changes were made.

IEC 61988-2-5:2012 determines the measuring methods for characterizing the performance of PDP modules (plasma display modules): Acoustic noise.

IEC 61988-2-1:2012 determines the following measuring methods for characterizing the performance of plasma display modules (PDP modules): a) four per cent (4 %) window luminance; b) luminance uniformity; c) dark-room contrast ratio; d) bright-room contrast ratio 100/70; e) white chromaticity and chromatic uniformity; f) colour gamut in the centre box; g) module power and current consumption; h) module power consumption using video signal; i) module luminous efficacy, and j) panel luminous efficacy. This edition includes the following significant technical changes with respect to the previous edition: The first edition of IEC 61988-2-1 and IEC 61988-2-2 were combined and reconstructed in this document.

IEC 61988-2-4:2011 determines the measuring methods for characterizing the performance of plasma display panel (PDP) modules in the following areas: a) viewing angle; b) image streaking; c) flicker; d) moving picture resolution.

IEC 61988-1:2011 gives the preferred terms, their definitions and symbols for colour AC plasma display panels (AC PDP); with the object of using the same terminology when publications are prepared in different countries. Guidance on the technology is provided in the annexes. This second edition cancels and replaces the first edition published in 2003, and constitutes a technical revision. The main technical changes with regard to the previous edition are as follows: Additional terms were added in Clause 3.

IEC 61747-6-2:2011 gives details of the quality assessment procedures, the inspection requirements, screening sequences, sampling requirements, and test and measurement procedures required for the assessment of liquid crystal display modules. The purpose of this standard is to indicate and list the procedure-dependent parameters and to prescribe the specific methods and conditions that are to be used for their uniform numerical determination. The contents of the corrigendum of January 2012 have been included in this copy.

Gives preferred terms, their definitions and symbols for organic light emitting diode (OLED) displays; with the object of using the same terminology when publications are prepared in different countries.

IEC 62341-5:2009 defines testing methods for evaluating environmental endurance of organic light emitting diode display modules (OLED display modules) for use and storage under the assumed usage environment.

IEC 62341-1-1:2009 is a generic specification for organic light emitting diode (OLED) displays. It defines general procedures for quality assessment to be used in the IECQ System and establishes general rules for methods of electrical and optical measurements, environmental and mechanical tests and endurance tests.

IEC 61988-5:2009 is a generic specification for plasma display panels specifies general procedures for quality assessment to be used in the IECQ-CECC system and establishes general principles for describing and testing of electrical, optical, mechanical and environmental characteristics.

IEC 61988-2-3:2009 determines the measuring methods for defects and degradation of colour plasma display (PDP) module in the following areas: a) cell defects; b) image sticking; c) luminance.

IEC 61988-3-2:2009 defines the electrical interface of digital video data signals, synchronization signals and functional signals between the image processing board of the PDP set and the control board of the PDP module, and defines the description of the pin assignment of the connectors.

IEC 61747-5-3:2009 applies to commercially available liquid crystal displays (LCDs). This standard applies to all LCD types, including transmissive, reflective or transflective liquid crystal display (LCD) modules using either segment, passive or active matrix and achromatic or colour type LCDs that are equipped with their own integrated source of illumination or without their own source of illumination. The objective of this standard is to establish uniform requirements for accurate and reliable measurements of the following LCD parameters: a) quasistatic strength, b) quasistatic fatigue. The methods described in this standard apply to all sizes, small and large, liquid crystal displays. This publication is to be read in conjunction with IEC 61747-1:1998.

This part of EN 61988 defines drawings and required dimensions of plasma display (PDP) modules, PDP components, PDP sub-assemblies and ancillary components. This standard serves as a basis to establish a set of PDP modules with a standard description of dimensions.

Describes the essential ratings and characteristics of matrix colour liquid crystal display modules.

This Blank detail specification specifiess Liquid crystal display devices - Part 2-2: Matrix colour LCD modules

Applicable to cathode ray tubes and cathode ray tube assemblies which are intended for use as components in apparatus and which have integral protection with respect to the effects of implosion. A CRT covered by this standard is intended to be installed in an enclosure designed both to protect the rear of the CRT against mechanical or other damage under normal conditions of operation and to protect the user against particles expelled in a backwards direction from the CRT face in the event of implosion.

Gives guidance on the preparation of outline drawings of cathode ray tubes with the object of encouraging the same practice when publications are prepared in different countries.

Lists test methods applicable to liquid crystal display devices. Takes into account, wherever possible, the environmental test methods outlined in EN 60068. Also includes visual inspection for both liquid crystal display cells and modules. Establishes uniform preferred test methods with preferred values for stress levels for judging the environmental properties of liquid crystal display devices.

Supersedes CECC 20 007 Issue 1:1991

Gives dimensions and tolerances for electronic tube and valve bases, holders and caps, together with the relevant gauges and gauging procedure, to ensure interchangeability. Also includes recommended practice for the preparation of drawings of electronic tubes and valves. This is a loose-leaf publication and supplements, containing new or revised sheets, are issued from time to time.

Applies to multi-electrode tubes, with the exception of cathode-ray tubes. Describes the system used for numbering the electrodes of the same type multi-electrode tubes and for assigning designations to the units of multiple-unit tubes.

Applies to the measurement of the direct interelectrode capacitances of electronic tubes of the following types: receiving tubes, cathode-ray tubes, gas tube and gas-filled valves, phototubes, photocells and multiplier types, high-power vacuum tubes.

IEC 62341-5-3:2013 specifies the standard measurement conditions and measurement methods for determining the image sticking and lifetime of organic light emitting diode (OLED) display panels and modules. It mainly applies to modules.

IEC 62341-5-2:2013 defines testing methods for evaluating mechanical endurance quality of Organic Light Emitting Diode (OLED) display panels and modules or their packaged form for transportation. It takes into account, wherever possible, the environmental testing methods outlined in specific parts of IEC 60068. The object of this standard is to establish uniform preferred test methods for judging the mechanical endurance properties of OLED display devices.

IEC 62629-1-2:2013 provides a list of the terminologies that are frequently used in describing 3D display technologies in the IEC 62629 series. Terms for various 3D display technologies on stereoscopic, autostereoscopic, volumetric, and holographic displays are included.

IEC 62629-22-1:2013 specifies optical measuring methods for autostereoscopic display devices. It defines general measuring procedures for optical characteristics of two-view and multi-view displays and integral imaging displays.

IEC 62595-2:2012 specifies the standard measurement conditions and measuring methods for determining electrical, optical, and electro-optical parameters of LED backlight units for liquid crystal displays. NOTE: Other backlights (Cold Cathode Fluorescent Lamps (CCFLs), External Electrode Fluorescent Lamps (EEFLs), Hot Cathode Fluorescent Lamps (HCFLs), Carbon Nano Tube (CNT), etc.) are excluded from this standard.

IEC 62341-6-3:2012 specifies the standard measurement conditions and measuring methods for determining image quality of organic light emitting diode (OLED) display panels and modules. More specifically, this standard focuses on five specific aspects of image quality, i.e., the viewing angle range, cross-talk, flicker, static image resolution, and moving image resolution.

IEC 62341-6-2:2012 specifies the standard measurement conditions and measurement methods for determining the visual quality and ambient performance of organic light-emitting diode (OLED) display modules and panels. This document mainly applies to colour display modules.

IEC 62595-1-2:2011 gives preferred terms, their definitions and symbols for backlight unit (BLU) and related display panel lighting systems including frontlight; with the object of using the same terminology when publications are prepared in different countries.

IEC 61747-6-3:2011 applies to transmissive type active matrix liquid crystal displays. This standard defines general procedures for quality assessment related to the motion performance of LCDs. It defines artifacts in the motion contents and methods for motion artifact measurement. NOTE: Motion blur measurement methods and analysis methods introduced in this standard could not be universal tools for all different LCD motion enhancement technologies due to its complexity. Users shall be notified of these circumstances.

IEC 61747-5-2:2011 gives the details of the quality assessment procedures and provides general rules for visual inspection of the active area of transmissive type active matrix colour liquid crystal display modules by the human eye. Furthermore, this standard includes defect definitions and the method for visual defect inspection. NOTE 1 - Mura is excluded from this standard because it was not clearly specified at the time this standard was developed. NOTE 2 - Restrictions on defect types, number, and sizes are specified in the quality contract (customer acceptance specification and incoming inspection specification) between panel and set makers.

IEC 62341-6-1:2009 specifies the standard measurement conditions and measuring methods for determining optical and electro-optical parameters of organic light emitting diode (OLED) display modules, and where specified, OLED display panels, in the following areas: a) luminance and uniformity; b) dark room contrast ratio; c) chromaticity, colour uniformity, colour gamut and white field correlated colour temperature; d) power consumption.

Defines test methods for evaluating environmental and mechanical endurance characteristics of plasma display modules (PDP modules).

Defines assessment procedures in such a manner that electronic components released by one participating country as conforming with the requirements of an applicable specification are equally acceptable in all participating countries without the need for further testing.

Applies to liquid crystal cells of the segment type monochrome. Gives details of the quality assessment procedures, the inspection requirements, screening sequences, sampling requirements and test and measurement procedures required for the assessment of liquid crystal display cells

Supersedes CECC 20 008 Issue 1:1992

Supersedes CECC 20 006 Issue 1:1991 * TC 86D disbanded at 105 BT

Gives details of the quality assessment procedures, inspection requirements, screening sequences, sampling requirements and test and measurement procedures required for the assessment of liquid crystal display modules. This standard is restricted to transmissive liquid crystal display modules using either segment, passive or active matrix and achromatic or colour type LCDs.

Gives the preferred terms, their definitions and symbols for colour AC plasma display panels (AC PDP); with the object of using the same terminology when publications are prepared in different countries. Guidance on the technology is provided in the annexes.

Determines the following measuring methods for characterising the performance of colour plasma display modules: a) bright-room contrast ratio; b) module power and current consumption, c) module luminous efficacy.

Determines the measuring methods for characterizing the performance of colour plasma display modules in the following areas: 4 % window luminance; luminance uniformity; dark-room contrast ratio; white chromaticity and chromatic uniformity; colour gamut in the centre box.

Superseded by EN 61747-2-1:2013

Applies to liquid crystal and solid-state display modules such as the following: - static/segment type liquid crystal display modules; - passive matrix monochrome and colour liquid crystal display modules; - active matrix monochrome and colour liquid crystal display modules. Gives details of the quality assessment procedures, the inspection requirements, screening sequences, sampling requirements, and test and measurement procedures required for the assessment of liquid crystal display modules.