47E - Discrete semiconductor devices

IEC 60747-17:2020 specifies the terminology, essential ratings, characteristics, safety test and the measuring methods of magnetic coupler and capacitive coupler.
It specifies the principles and requirements of insulation and isolation characteristics for magnetic and capacitive couplers for basic insulation and reinforced insulation.
This first edition cancels and replaces IEC PAS 60747-17:2011. This edition constitutes a technical revision.
This edition includes the following significant te...view more

IEC 60747-5-5:2020(E) specifies the terminology, essential ratings, characteristics, safety tests, as well as the measuring methods for photocouplers.
Note: The term "optocoupler" can also be used instead of "photocoupler".
This edition includes the following significant technical changes with respect to the previous edition:
a) optional data sheet basic insulation rating in accordance with IEC 60664-1:2007, 6.1.3.5;
b) editorial corrections on the use of VIORM;
c) editorial corrections on ...view more

The contents of the corrigendum of September 2020 have been included in this copy.

IEC 60747-18-2:2020(E) specifies the evaluation process of lens-free CMOS photonic array sensor package modules. This document includes the measurement environment of each process, statistical analysis of test data, middle layer effect under various user light, evaluation of calibrated lens-free CMOS photonic array sensor package modules, and test report.

IEC 60747-18-3:2019(E) specifies the fluid flow characteristics of lens-free CMOS photonic array sensor package modules with fluidic system for bio analysis. This document includes the measurement set-up, measurement and calculation at initial state flow, criteria of the fluidic system for quality assurance, measurement and calculation at steady-state flow, and test report.

IEC 60747-5-11:2019(E) specifies the measuring methods of radiative and nonradiative currents of single light emitting diode (LED) chips or packages without phosphor. White LEDs for lighting applications are out of the scope of this document. This document utilizes the internal quantum efficiency (IQE) as a function of current, whose measurement methods are discussed in other documents.

IEC 60747-5-10:2019(E) specifies the measuring method of the internal quantum efficiency (IQE) of single light emitting diode (LED) chips or packages without phosphor. White LEDs for lighting applications are out of the scope of this document. This document utilizes only the relative external quantum efficiency (EQE) measured at an operating room temperature. In order to identify the reference IQE, an operating current corresponding to the injection efficiency of 100 % is found and the radiative...view more

IEC 60747-5-9:2019(E) specifies the measuring method of the internal quantum efficiency (IQE) of single light emitting diode (LED) chips or packages without phosphor. White LEDs for lighting applications are out of the scope of this document. This document utilizes the relative external quantum efficiencies (EQEs) measured at cryogenic temperatures and at an operating temperature, which is called temperature-dependent electroluminescence (TDEL). In order to identify the reference IQE of 100 %, t...view more

IEC 60747-19-1:2019(E) specifies the control scheme of a sensor which is a device or a module which achieves a sensing function, data processing function and data output function, by employing a digital processing unit and a means of bidirectional communication between the sensor and an external terminal module

IEC 60747-9:2019 specifies product specific standards for terminology, letter symbols, essential ratings and characteristics, verification of ratings and methods of measurement for insulated-gate bipolar transistors (IGBTs).
This third edition includes the following significant technical changes with respect to the previous edition:  
reverse-blocking IGBT and its related technical contents have been added;
reverse-conducting IGBT and its related technical contents have been added;
some parts...view more

IEC 60747-14-10:2019 specifies the terms, definitions, symbols, tests, and performance evaluation methods used to determine the performance characteristics of wearable electrochemical-glucose sensors for practical use. This document is applicable to all wearable electrochemical-glucose sensors for consumers and manufacturers, without any limitations on device technology and size.

IEC 60747-5-8:2019 specifies the terminology and the measuring methods of various efficiencies of single light emitting diode (LED) chips or packages without phosphor. White LEDs for lighting applications are out of the scope of this part of IEC 60747. The efficiencies whose measuring methods are defined in this part are the power efficiency (PE), the external quantum efficiency (EQE), the voltage efficiency (VE), and the light extraction efficiency (LEE). To measure the LEE, the measurement dat...view more

IEC 6074716-6:2019 specifies the terminology, essential ratings and characteristics, and measuring methods of microwave integrated circuit frequency multipliers.

IEC 60747-18-1:2019 (E) specifies the test methods and data analysis for the calibration of lens-free CMOS photonic array sensors. This document includes the test conditions of each process, configuration of lens-free CMOS photonic array sensors, statistical analysis of test data, calibration for planarization and linearity, and test reports.

IEC 60747-2:2016 provides standards for the following categories or sub-categories of rectifier diodes, including:
- line rectifier diodes;
- avalanche rectifier diodes;
- fast-switching rectifier diodes;
- Schottky barrier diodes.
This edition includes the following significant technical changes with respect to the previous edition:
a) Schottky barrier diodes and its properties are added;
b) Clauses 3, 4, 5 and 7 were amended with some deletions of information no longer in use or already...view more