This document specifies minimum requirements for the design, testing and production testing of valves, including appropriate fittings, which are connected to mobile or static LPG pressure vessels above 150 l water capacity. Pressure relief valves and their ancillary equipment, contents gauges and automotive LPG components are outside the scope of this document.
This document does not apply to refineries or other process plants.

    • sale 10% off
    • Standard
      52 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a maximum allowable pressure, PS, equal or less than 100 bar and shell wall thicknesses not exceeding 60 mm, which are constructed of ferritic or austenitic spheroidal graphite cast iron. The thickness limitation of the shell does not apply to thickness of flanges, reinforcements, bosses etc. The allowable grades do not include lam...view more

    • sale 10% off
    • Amendment
      16 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      18 pages
      English language
    • e-Library read for
      1 day

This Part of this European Standard specifies requirements for the design of unfired pressure vessels covered by EN 13445-1:2009 and constructed of steels in accordance with EN 13445-2:2009. EN 13445-5:2009, Annex C specifies requirements for the design of access and inspection openings, closing mechanisms and special locking elements. NOTE This Part applies to design of vessels before putting into service. It may be used for in service calculation or analysis subject to appropriate adjustment.

    • sale 10% off
    • Standard
      865 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      865 pages
      French language
    • e-Library read for
      1 day

This European Standard specifies the requirements for material, design, manufacturing, testing and documentation for stationary piping intended for use in refrigerating systems, heat pumps and secondary cooling and heating systems. These refrigerating systems and heat pump systems are referenced in this standard as refrigerating systems as defined in EN 378-1.
1.2   This European Standard applies to piping including welded or brazed attachments up to and including the flanges, screwed, welded or ...
view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements for material, design, manufacturing, testing and documentation for stationary pressure vessels intended for use in refrigerating systems and heat pumps. These systems are referenced in this standard as refrigerating systems as defined in EN 378-1.
This European Standard applies to vessels, including welded or brazed attachments up to and including the nozzle flanges, screwed, welded or brazed connectors, or to the edge to be welded or brazed at ...
view more

    • sale 10% off
    • Standard
      106 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      88 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the technical delivery conditions in two test categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.
This Part of EN 10216 may also be applied for tubes of non-circular cross section; necessary modification should be agreed at the time of enquiry and order.
NOTE   Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, presum...
view more

    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day

This document lists the terms and definitions for use in European Standards produced by CEN/TC 286.

    • sale 10% off
    • Technical specification
      115 pages
      English, French and German language
    • e-Library read for
      1 day

This European Standard specifies the design, testing and inspection requirements for pressure relief valve isolating devices, valve manifolds, vent pipes and system assemblies which are, where necessary, used with pressure relief valves for use in static pressure vessels for Liquefied Petroleum Gas (LPG) service.
This European Standard addresses both prototype testing and production testing of isolating devices and PRV manifolds.
Pressure relief valves for LPG pressure vessels are specified in...
view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for:
a)   routine inspection, periodic inspection and requalification of fixed LPG storage pressure vessels of sizes greater than 13 m3, and associated fittings;
b)   marking pressure vessels and/or keeping records, as appropriate, as a result of routine inspection, periodic inspection and requalification.
This European Standard excludes refrigerated storage.

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for:
a)   routine inspection, periodic inspection and requalification of fixed LPG storage tanks of sizes from 150 l up to and including 13 m³, and associated fittings;
b)   marking tanks and/or keeping records, as appropriate, as a result of routine inspection, periodic inspection and requalification.
This European Standard excludes refrigerated storage.

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This Part of EN 10217 specifies the technical delivery conditions in two test categories of submerged arc welded tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

This Part of EN 10217 specifies the technical delivery conditions in two test categories of electric welded tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This Part of EN 10217 specifies the technical delivery condition in two test categories for welded tubes of circular cross section, made of weldable alloy fine grain steel.

    • sale 10% off
    • Standard
      53 pages
      English language
    • e-Library read for
      1 day

This Part of EN 10217 specifies the technical delivery conditions in two test categories of electric welded tubes of circular cross section, with specified low temperature properties, made of non-alloy steel.

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This Part of EN 10217 specifies the technical delivery conditions in two test categories of submerged arc welded tubes of circular cross section, with specified low temperature properties, made of non-alloy steel.

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

This Part of EN 10217 specifies the technical delivery conditions for two qualities TR1 and TR2 of welded tubes of circular cross section, made of non-alloy quality steel and with specified room temperature properties.

    • sale 10% off
    • Standard
      46 pages
      English language
    • e-Library read for
      1 day

Revision of clause 16, 22 and annex W

    • sale 10% off
    • Amendment
      51 pages
      English language
    • e-Library read for
      1 day

This Part of this European Standard specifies requirements for the design of unfired pressure vessels covered by EN 13445-1:2009 and constructed of steels in accordance with EN 13445-2:2009. EN 13445-5:2009, Annex C specifies requirements for the design of access and inspection openings, closing mechanisms and special locking elements. NOTE This Part applies to design of vessels before putting into service. It may be used for in service calculation or analysis subject to appropriate adjustment.

    • sale 10% off
    • Amendment
      11 pages
      English language
    • e-Library read for
      1 day

Amendment to Annex J for Tubesheets

    • sale 10% off
    • Amendment
      50 pages
      English language
    • e-Library read for
      1 day

This document is intended for the application of AT on metallic pressure equipment during controlled
loading.
Therefore the overall aims of this document are:
— to detect, locate and grade areas with evolving imperfections;
— to provide the manufacturer the possibility to compare results of the first test with those of
subsequent periodic inspections;
— to determine the possibilities and limits of AE testing (AT) for pressure equipment;
— to establish common basis for procedures to perfor...
view more

    • sale 10% off
    • Technical specification
      15 pages
      English language
    • e-Library read for
      1 day