01.040.23 - Fluid systems and components for general use (Vocabularies)

The vocabulary in ISO 7369:2004 is out of date and that this standard needs to be revised to update the definitions in accordance to EN ISO 10380, EN 14585 and the PED (Pressure Equipment Directive).
Revision of EN ISO 7369:2004 under VA/CEN lead with Eric Winterbert as project leader is accepted by ISO/TC 5/SC 11 (Resolution 1/2016).
The exact scope of the revision will be clarified by the project group before launching the NWIP ballot.
EN-ISO 7369 defines current terms concerning metal ...view more

This document defines current terms concerning metal hoses, metal hose assemblies and component parts. This document applies to: a) stripwound metal hoses and hose assemblies; b) corrugated metal hoses and hose assemblies. NOTE 1 These hoses can be used braided, covered or lined. NOTE 2 Equivalent terms in English, French, German and Dutch are given in Annex A.

This document gives definitions of vacuum pumps and related terms. It is a continuation of ISO 3529‑1 which defines general terms used in vacuum technology.

This Standard provides additional terms and definitions to those written in the European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR) or the Regulations concerning the International Carriage of Dangerous Goods by Rail (RID), appearing as Appendix C to the Convention concerning International Carriage by Rail (COTIF). This document forms part of series of documents prepared by CEN/TC 296 regarding the transport of dangerous goods. The series supports the proper ...view more

This document compiles a vocabulary of terms, with their definitions, applied in the field of district heating and district cooling pipe systems with factory made system components. Only terms which are particular to the pertinent field in CEN/TC 107 are included.

This document compiles a vocabulary of terms, with their definitions, applied in the field of district heating and district cooling pipe systems with factory made system components. Only terms which are particular to the pertinent field in CEN/TC 107 are included.

This document lists the terms and definitions for use in European Standards produced by CEN/TC 286.

This document provides additional terms and definitions to those written in the European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR) or the Regulations concerning the International Carriage of Dangerous Goods by Rail (RID), appearing as Appendix C to the Convention concerning International Carriage by Rail (COTIF).
This document forms part of series of documents prepared by CEN/TC 296 regarding the transport of dangerous goods. The series supports the proper...view more

This document defines general terms used in vacuum technology. It gives theoretical definitions as precise as possible, bearing in mind the need for use of the concept in practice.

This standard gives the denominations of valves. It has the purpose to provide a uniform and systematic terminology for all types of valves. By reasons of classification of terms clause 4 defines terms related to basic design characteristics and clause 5 defines terms related to functional characteristicsof valves.

This European Standard specifies the terms and definitions for the rating and performance of air conditioners, liquid chilling packages and heat pumps using either, air, water or brine as heat transfer media, with electrically driven compressors when used for space heating and/or cooling.
It also specifies the terms and definitions for the rating and performance of process chillers.
This European Standard does not apply to heat pumps for domestic hot water, although certain definitions can be ...view more

This European Standard specifies the denominations of valves to provide a uniform and systematic terminology for all types of valves.

ISO 14692-1:2017 defines the applications, pressure rating methodology, the classification of the products according to application, type of joint and resin matrix and the limitations to both the materials of construction and the dimensions. It also lists the terms, definitions and symbols used and provides guidance in the use and interpretation of ISO 14692-2, ISO 14692-3 and ISO 14692-4.
ISO 14692 (all parts) is applicable to GRP piping systems that 1) utilize joints that are capable of restr...view more

This European Standard specifies terms and definitions to be used for pressure equipment and assemblies within the scope of European Directives on pressure equipment.
NOTE   It can be applied to other pressure equipment.

ISO/TS 11672:2016 collects the various designation and nomenclature schemes specified in International Standards for connectors and similar products standardized by ISO/TC 131/SC 4. It establishes a uniform nomenclature structure to facilitate standardization of product names used for threaded connectors, push-in connectors, flanges, hose fittings, port plugs and quick-action couplings. The designation and nomenclature established in this document are applicable for procurement purposes when agr...view more

This European Standard specifies terms and definitions to be used for pressure equipment and assemblies within the scope of European Directives on pressure equipment.
NOTE   It can be applied to other pressure equipment.

This European Standard specifies the names of components of valves and their definitions. It has the purpose to provide a uniform terminology for all components of valves.
This European Standard covers components common to more than one type of valve. Names of components and definitions specific to one type of valve will be found in the relevant product or performance standard.

This European Standard specifies the names of components of valves and their definitions. It has the purpose to provide a uniform terminology for all components of valves.
This European Standard covers components common to more than one type of valve. Names of components and definitions specific to one type of valve will be found in the relevant product or performance standard.

This standard gives the terminology
for ISO/TC 58 standards intended to
be used under regulations for the
transport of dangerous goods that are
based on the UN Model Regulations.
Variations from the terminology are
permissible to comply with other
regulations such as for stationary and
automotive applications.
NOTE In addition to terms and
definitions used in the official languages
English and French, this document gives
the equivalent terms and definitions in
German; these are publ...view more

ISO 10286:2015 gives the terminology for ISO/TC 58 standards intended to be used under regulations for the transport of dangerous goods that are based on the UN Model Regulations. Variations from the terminology are permissible to comply with other regulations such as for stationary and automotive applications.