29.260.10 - Electrical installations for outdoor use
ICS 29.260.10 Details
Electrical installations for outdoor use
Elektrische Anlagen fur den Freilufteinsatz
Installations electriques pour usage externe
Električne inštalacije za uporabo na prostem
General Information
This document is applicable to the safe management and operation (3.1.2) of and work activity
(3.4.1) on, with, or near electrical installations operating at voltage levels from, and including,
extra-low voltage up to and including high voltage.
This latter term includes those levels commonly referred to as medium and extra-high voltage.
These electrical installations are designed for the generation, transmission, conversion,
distribution and use of electrical power. Some of these electrical installations are permanent
and fixed, such as a distribution installation in a factory or office complex. Others are temporary,
such as on construction sites, and some are mobile or capable of being moved either whilst
energized or whilst not energized nor charged, examples are electrically driven excavating
machines in quarries or open-cast coal sites.
This document sets out the requirements for the safe management and operation (3.1.2) of and
work activity (3.4.1) on, with, or near these electrical installations. The requirements apply to
all operational, working and maintenance procedures. They apply to all non-electrical work
(3.4.3) such as building work near to overhead lines or underground cables as well as electrical
work (3.4.2), when there is a risk (3.1.3) of electrical danger (3.1.5).
This document does not apply to ordinary persons (3.2.7) when using installations and
equipment, provided that the installations and equipment comply with relevant standards and
are designed and installed for use by ordinary persons (3.2.7).
This document has not been developed specifically to apply to the electrical installations listed
below. However, if there are no other rules or procedures, the principles of this document could
be applied to them:
– on any aircraft and hovercraft moving under its own power, (international aviation laws can
apply);
– on any sea going ship moving under its own power, or under the direction of the master,
(international marine laws can apply);
– electronic telecommunications and information systems;
– electronic instrumentation, control and automation systems;
– at coal or other mines;
– on off-shore installations (international marine laws can apply);
– on vehicles;
– on electric traction systems;
– on experimental electrical research work.
- Technical specification90 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification89 pagesEnglish languagesale 15% off
IEC TS 63527:2025 is applicable to the safe management and operation of and work activity on, with, or near electrical installations operating at voltage levels from and including extra-low voltage up to and including high voltage.
This latter term includes those levels commonly referred to as medium and extra-high voltage.
These electrical installations are designed for the generation, transmission, conversion, distribution and use of electrical power. Some of these electrical installations are permanent and fixed, such as a distribution installation in a factory or office complex, others are temporary, such as on construction sites, and others are mobile or capable of being moved either whilst energized or whilst not energized nor charged. Examples are electrically driven excavating machines in quarries or open-cast coal sites.
This document sets out the requirements for the safe management and operation of and work activity on, with, or near these electrical installations. The requirements apply to all operational, working and maintenance procedures. They apply to all non-electrical work such as building work near to overhead lines or underground cables as well as electrical work , when there is a risk of electrical danger.
This document does not apply to ordinary persons when using installations and equipment, provided that the installations and equipment comply with relevant standards and are designed and installed for use by ordinary persons.
This document has not been developed specifically to apply to the electrical installations listed below. However, if there are no other rules or procedures, the principles of this document could be applied to them:
– on any aircraft and hovercraft moving under its own power, (international aviation laws can apply);
– on any sea going ship moving under its own power, or under the direction of the master, (international marine laws can apply);
– electronic telecommunications and information systems;
– electronic instrumentation, control and automation systems;
– at coal or other mines;
– on off-shore installations (international marine laws can apply);
– on vehicles;
– on electric traction systems;
–on experimental electrical research work.
- Technical specification90 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification89 pagesEnglish languagesale 15% off
This standard shall be read with EN 50186-1 "Operation of electrical installations - Part 1: General requirements" and contains national annexes which need to be used on this subject.
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
This standard shall be read with EN 50186-1 "Operation of electrical installations - Part 1: General requirements" and contains national annexes which need to be used on this subject.
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
These normative annexes list the particular national requirements, as laid down in the relevant laws, regulations and standards, which specify the protective distances for each of the CENELEC member countries at the time when this standard was prepared
- Standard4 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard applies to the installation and operation of fixed and portable washing systems for the washing and cleaning of energized insulators on outdoor installations with voltages over 1 kV
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard applies to the installation and operation of fixed and portable washing systems for the washing and cleaning of energized insulators on outdoor installations with voltages over 1 kV
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
These normative annexes list the particular national requirements, as laid down in the relevant laws, regulations and standards, which specify the protective distances for each of the CENELEC member countries at the time when this standard was prepared
- Standard4 pagesEnglish languagesale 10% offe-Library read for1 day