13.020.01 - Environment and environmental protection in general

2020-10-13_JO_CLC/TC 62 Decision  2019-05-21/22 in Oslo to remove the link to the published standard

This document provides guidance to standards developers on how to take account of climate change in the planning, drafting, revision and updating of ISO standards and other deliverables. It outlines a framework and general principles that standards developers can use to develop their own approach to addressing climate change on a subject-specific basis. It aims to enable standards developers to include adaptation to climate change (ACC) and climate change mitigation (CCM) considerations in their...view more

IEC 62321-3-2:2020 is available as IEC 62321-3-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62321-3-2:2020 specifies the screening analysis of fluorine, chlorine and bromine in polymers and electronics using combustion-ion chromatography (C-IC). IEC 62321-3-2:2020 cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This editio...view more

IEC 62321-10:2020 specifies one normative technique for the determination of polycyclic aromatic hydrocarbons (PAHs) in polymers of electrotechnical products. These PAHs can especially be found in the plastic and rubber parts of a wide range of consumer articles. They are present as impurities in some of the raw materials used in the production of such articles, in particular in extender oils and in carbon black. They are not added intentionally to the articles and do not perform any specific fu...view more

This document summarizes current scientific literature on the occurrence of macroplastics and microplastics, in the environment and  biota. This document gives an overview about testing methods, including sampling from various environmental media, sample preparation and analysis. Further, chemical and physical testing methods for the identification and quantification of plastics are described as well as biological testing methods.
This document gives recommendations for the standardisation of m...view more

This document summarizes current scientific literature on the occurrence of macroplastics and microplastics, in the environment and biota. It gives an overview of testing methods, including sampling from various environmental matrix, sample preparation and analysis. Further, chemical and physical testing methods for the identification and quantification of plastics are described.
This document gives recommendations for three steps necessary for the standardization of methods towards harmonized ...view more

This document summarizes current scientific literature on the occurrence of macroplastics and microplastics, in the environment and biota. It gives an overview of testing methods, including sampling from various environmental matrix, sample preparation and analysis. Further, chemical and physical testing methods for the identification and quantification of plastics are described. This document gives recommendations for three steps necessary for the standardization of methods towards harmonized p...view more

This document provides guidance to standards developers on how to take account of sustainability in the drafting, revision and updating of ISO standards and similar deliverables. It outlines a methodology that ISO standards developers can use to develop their own approach to addressing sustainability on a subject-specific basis.

IEC 62430:2019 describes principles, specifies requirements and provides guidance for organizations intending to integrate environmental aspects into the design and development in order to minimize the adverse environmental impacts of their products.
This document applies to processes on how ECD (environmentally conscious design) are integrated into the design and development. This document applies to any organization, regardless of its size, type or sector.
This document does not provide requ...view more

This document provides a structure for inclusion of environmental aspects in standards for plastics products. It proposes an approach which is directed at minimizing any adverse environmental impact without detracting from the primary purpose of ensuring adequate fitness for use of the products under consideration.
The guidance provided by this document is intended primarily for use by standards writers. Over and above its primary purpose, however, this document provides guidance of value to th...view more

This document provides a structure for inclusion of environmental aspects in standards for plastics products. It proposes an approach which is directed at minimizing any adverse environmental impact without detracting from the primary purpose of ensuring adequate fitness for use of the products under consideration.
The guidance provided by this document is intended primarily for use by standards writers. Over and above its primary purpose, however, this document provides guidance of value to th...view more

IEC 60364-8-1:2019(E) provides additional requirements, measures and recommendations for the design, erection and verification of all types of low-voltage electrical installation including local production and storage of energy for optimizing the overall efficient use of electricity. It introduces requirements and recommendations for the design of an electrical installation within the framework of an energy efficiency management approach in order to get the best permanent functionally equivalent...view more

IEC 60364-8-1:2019(E) provides additional requirements, measures and recommendations for the design, erection and verification of all types of low-voltage electrical installation including local production and storage of energy for optimizing the overall efficient use of electricity. It introduces requirements and recommendations for the design of an electrical installation within the framework of an energy efficiency management approach in order to get the best permanent functionally equivalent...view more

IEC TR 61839-2:2019 specifies the PSR (product specific rules) for optical/copper telecom accessories products. It covers the use, installation and end of life stages and provides methodological precisions to PEP/PCR writing for “optical/copper telecom accessories” products used for communication, data, control and command. PSR and general rules all together form the product category rules.
This specification document is primarily intended for:
· environment and/or product managers;
· LCA (li...view more

IEC 62474:2018 is available as IEC 62474:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62474:2018 specifies the procedure, content, and form relating to material declarations for products of companies operating in and supplying the electrotechnical industry. Process chemicals and emissions during product use are not in the scope of this International Standard. It provides data to downs...view more

This document provides a structure for inclusion of environmental aspects in standards for plastics products. It proposes an approach which is directed at minimizing any adverse environmental impact without detracting from the primary purpose of ensuring adequate fitness for use of the products under consideration. The guidance provided by this document is intended primarily for use by standards writers. Over and above its primary purpose, however, this document provides guidance of value to tho...view more