65.040.20 - Buildings and installations for processing and storage of agricultural produce

This European standard specifies the requirements related to dimensional, mechanical and optical characteristics of thermoplastic films and tubes used during the manufacture of silage and designed to last at least one year for protecting fodder.
It specifies a classification for the durability of silage films and the test methods referred to in this standard.
This European Standard is applicable to transparent, black, white or coloured (e.g. black/white) thermoplastic silage films based on pol...view more

This European Standard specifies the requirements related to dimensional, mechanical and optical characteristics of thermoplastic films and tubes used during the manufacture of silage and designed to last at least one year for protecting fodder.
It specifies a classification for the durability of silage films and the test methods referred to in this standard.
This European Standard is applicable to transparent, black, white or coloured (e.g. black/white) thermoplastic silage films based on pol...view more

DOP of 12 months!

DOP of 12 months! * 2017-03-22 FJD - No xml version as mother version was not originally published as xml.

This European Standard specifies requirements for design, performance, safety and hygiene of refrigerated bulk milk coolers and the related methods of test. This standard deals with all significant hazards, hazardous situations and events relevant to bulk milk coolers on farms, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It applies to refrigerated bulk milk tanks with air cooled condensing units and automa...view more

This part of ISO 7700 specifies a method of checking the performance of moisture meters in service for measuring the moisture content of cereal grains.
This part of ISO 7700 is not applicable for pattern approval, nor for the initial calibration of moisture meters.
The results of the checking described in this part of ISO 7700 are used to decide whether to perform a revision or a repair of the moisture meter.
NOTE For built and pattern approval specifications, see OIML Recommendation 59[1].

This European Standard specifies safety requirements for the design and construction of unloaders mounted in stationary round silos for the removal of the silage and similar materials. It applies to electrically powered, slowly rotating unloaders which operate on top surface of the stored silage surface. It describes methods for the elimination or reduction of hazards for which specific requirements on unloaders, as defined in 3 and shown in Annex B, are necessary. In addition, it specifies the ...view more

This European Standard specifies safety requirements for the design and construction of unloaders mounted in stationary round silos for the removal of the silage and similar materials. It applies to electrically powered, slowly rotating unloaders which operate on top surface of the stored silage surface.
It describes methods for the elimination or reduction of hazards for which specific requirements on unloaders, as defined in 3 and shown in Annex B, are necessary. In addition, it specifies the...view more

This document, used together with EN 1553, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs, to be used by one operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices ...view more

TC - Modifications in Foreword, Clauses 1, 2, 4, 5, 6, 8 and 9 and Annex A in the E mother reference version.

TC - Modifications in Foreword, Clauses 1, 2, 4, 5, 6, 8 and 9 and Annex A in the E mother reference version.
2013: Originator of XML version: first setup pilot of CCMC in 2012

This standard applies for automatic back splitting machines.
This standard deals with all significant hazards, hazardous situations and events relevant to machines, appliances and machinery, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
These significant hazards, hazardous situations and events exist during the whole life of back splitting machines.
This standard applies not to curing injection machines which are manufactured before CEN t...view more

Complementary to Part 1. Varied general rules and additional detailed rules for the structural design of free standing or supported steel silos of circular or rectangular plan for storing bulk granular solids.

Complementary to Part 1. Varied general rules and additional detailed rules for the structural design of free standing or supported steel silos of circular or rectangular plan for storing bulk granular solids.

This part of ISO 11520 specifies additional procedures and gives guidance for testing and evaluating the drying performance of continuous-flow and batch grain driers for specific grain crops including wheat, barley, oats, maize, rice, sorghum and rape. It supplements the general procedures given in ISO 11520-1 based on drying only wheat over the limited range of moisture content of 20 % to 15 % wet basis. Methods and data are given for a) determining the evaporation rate of driers when drying gr...view more

- Corrugated silos with vertical stiffeners
- Axially stiffened silos with isotropic walls
- Hopper buckling and transition junctions
- Anchorage and wind pressure combinations
- Internal ties in rectangular silos
- Elephant’s foot buckling and restrictions on all silos

- Corrugated silos with vertical stiffeners
- Axially stiffened silos with isotropic walls
- Hopper buckling and transition junctions
- Anchorage and wind pressure combinations
- Internal ties in rectangular silos
- Elephant’s foot buckling and restrictions on all silos