91.080.10 - Metal structures

This document gives guidelines and recommendations for the general principles ofdesign appropriate to articles to be hot dip galvanized after fabrication (e.g.in accordance with ISO 1461) for the corrosion protection of, for example,articles that have been manufactured in accordance with EN 1090-2. This documentdoes not apply to hot dip galvanized coatings applied to continuous wire orsheet (e.g. to EN 10346).

This document gives guidelines and recommendations for the general principles of design appropriate to articles to be hot dip galvanized after fabrication (e.g. in accordance with ISO 1461) for the corrosion protection of, for example, articles that have been manufactured in accordance with EN 1090-2.
This document does not apply to hot dip galvanized coatings applied to continuous wire or sheet (e.g. to EN 10346).

This European Standard specifies the general principles for the implementation of a system of cathodic protection against corrosive attacks on buried or immersed metal structures with and without the influence of external electrical sources.

This European Standard specifies requirements for the execution of aluminium structural components and structures made from:
a)   rolled sheet, strip and plate;
b)   extrusions;
c)   cold drawn rod, bar and tube;
d)   forgings;
e)   castings.
NOTE 1   The execution of structural components is referred to as manufacturing, in accordance with EN 1090-1.
This European Standard specifies requirements independent of the type and shape of the aluminium structure, and this European Standard is applicable to...view more

This document specifies requirements for the execution of aluminium structural components and structures made from:
a)   rolled sheet, strip and plate;
b)   extrusions;
c)   cold drawn rod, bar and tube;
d)   forgings;
e)   castings.
NOTE 1   The execution of structural components is referred to as manufacturing, in accordance with EN 1090-1.
This document specifies requirements independent of the type and shape of the aluminium structure, and this document is applicable to structures under predomina...view more

This European Standard specifies requirements for the execution, i.e. the manufacture and the installation, of cold-formed structural steel members and sheeting and cold-formed structures for roof, ceiling, floor, wall and cladding applications.
This European Standard applies to structures designed according to the EN 1993 series.
This European Standard applies to structural members and sheeting to be designed according to EN 1993 1 3.
This European Standard may be used for structures designe...view more

This European Standard specifies requirements for execution of structural steelwork as structures or as manufactured components, produced from:
-   hot rolled, structural steel products up to and including grade S700;
-   cold formed components and sheeting up to and including grade S700 (unless coming within the scope of prEN 1090-4);
-   hot finished or cold formed austenitic, austenitic-ferritic and ferritic stainless steel products;
-   hot finished or cold formed structural hollow sections, inc...view more

ISO 12944-9:2018 specifies the performance requirements for protective paint systems for offshore and related structures (i.e. those exposed to the marine atmosphere, as well as those immersed in sea or brackish water). Such structures are exposed to environments of corrosivity category CX (offshore) and immersion category Im4 as defined in ISO 12944‑2.
ISO 12944-9:2018 describes paint systems for high durability according to ISO 12944‑1.
ISO 12944-9:2018 is applicable to structures made of ca...view more

ISO 12944-7:2017 deals with the execution and supervision of paint work on steel structures in the workshop or on site.
ISO 12944-7:2017 does not apply to
- the preparation of surfaces to be painted (see ISO 12944‑4) and the supervision of such work,
- the application of metallic coatings, and
- pre-treatment methods, such as phosphating and chromating, and paint application methods, such as dipping, powder coating or coil coating.

ISO 12944-8:2017 covers the development of specifications for corrosion protection of steel structures using protective paint systems. It relates to new work and maintenance in the workshop or on site and is also applicable to the corrosion protection of individual components. ISO 12944-8:2017 covers the corrosion protection of steel structures exposed to different corrosion stresses by environments such as indoors, open-air and immersion in water or burial in soil, as well as special stresses, ...view more

ISO 12944-3:2017 deals with the basic criteria for the design of steel structures to be coated by protective paint systems in order to avoid premature corrosion and degradation of the coating or the structure. It gives examples of appropriate and inappropriate design, indicating how problems of application, inspection and maintenance of paint systems can be avoided. Design measures which facilitate handling and transport of the steel structures are also considered.

ISO 12944-4:2017 covers the following types of surfaces of steel structures consisting of carbon or low-alloy steel, and their preparation:
- uncoated surfaces;
- surfaces thermally sprayed with zinc, aluminium or their alloys;
- hot-dip-galvanized surfaces;
- zinc-electroplated surfaces;
- sherardized surfaces;
- surfaces painted with prefabrication primer;
- other painted surfaces.
ISO 12944-4:2017 defines a number of surface preparation grades but does not specify any requirements for...view more

ISO 12944-1:2017 defines the overall scope of ISO 12944 (all parts). It gives some basic terms and definitions and a general introduction to the other parts of ISO 12944. Furthermore, it includes a general statement on health, safety and environmental protection, and guidelines for using ISO 12944 (all parts) for a given project.

ISO 12944-2:2017 deals with the classification of the principal environments to which steel structures are exposed, and the corrosivity of these environments. ISO 12944-2:2017
- defines atmospheric-corrosivity categories, based on mass loss (or thickness loss) by standard specimens, and describes typical natural atmospheric environments to which steel structures are exposed, giving advice on the estimation of the corrosivity,
- describes different categories of environment for structures immer...view more

This document provides guidelines and recommendations regarding the general principles of design
that are appropriate for articles to be sherardized for corrosion protection.
The protection afforded by the sherardized coating to the article will depend upon the method of
application of the coating, the design of the article and the specific environment to which the article is
exposed. The sherardized article can be further protected by application of additional coatings (outside
the scope o...view more

This document provides guidelines and recommendations regarding the general principles of
design which are appropriate for articles to be zinc coated for corrosion protection and the level of
corrosion resistance provided by zinc coatings applied to iron or steel articles, exposed to a variety of
environments. Initial protection is covered in relation to
— available standard processes,
— design considerations, and
— environments for use.
This document applies to zinc coatings applied by t...view more

DOP of 12 months! * 2017-03-22 FJD - No xml version as mother version was not originally published as xml.

DOP of 12 months!
2017-03-29 FJD - No xml version as the mother standard EN 1993-4-2:2007 was not edited as an xml deliverable.

ISO 14708-3:2017 provides guidelines and recommendations regarding the general principles of design that are appropriate for articles to be sherardized for corrosion protection.
The protection afforded by the sherardized coating to the article will depend upon the method of application of the coating, the design of the article and the specific environment to which the article is exposed. The sherardized article can be further protected by application of additional coatings (outside the scope of...view more

ISO 14713-1:2017 provides guidelines and recommendations regarding the general principles of design which are appropriate for articles to be zinc coated for corrosion protection and the level of corrosion resistance provided by zinc coatings applied to iron or steel articles, exposed to a variety of environments. Initial protection is covered in relation to
- available standard processes,
- design considerations, and
- environments for use.
ISO 14713-1:2017 applies to zinc coatings applied b...view more