CEN/TS 17158:2018
(Main)Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material
Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material
This document specifies mechanical and optical test methods for the determination of particle size of lignocellulosic material for use in wood plastic composites (WPC) and natural fibre composites (NFC).
Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (üblicherweise Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) - Bestimmung der Partikelgröße von lignocellulosehaltigem Material
Dieses Dokument legt mechanische und optische Prüfverfahren zur Bestimmung der Partikelgröße von lignocellulosehaltigem Material zur Verwendung in Holz-Polymer-Werkstoffen (WPC) und Naturfaserverbundwerkstoffen (NFC) fest.
Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Détermination des dimensions de particles de matières ligocellulosiques
Kompoziti iz materialov na osnovi celuloze in termoplastov (običajno se imenujejo lesni polimerni kompoziti (WPC) ali kompoziti iz naravnih vlaken (NFC)) - Ugotavljanje velikosti delcev lignoceluloznega materiala
Te tehnične specifikacije določajo mehanske in optične preskusne metode za ugotavljanje velikosti delcev lignocelulozega materiala za uporabo v lesnih polimernih kompozitih (WPC) ali kompozitih iz naravnih vlaken (NFC).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 17158:2018
01-julij-2018
.RPSR]LWLL]PDWHULDORYQDRVQRYLFHOXOR]HLQWHUPRSODVWRY RELþDMQRVHLPHQXMHMR
OHVQLSROLPHUQLNRPSR]LWL :3& DOLNRPSR]LWLL]QDUDYQLKYODNHQ 1)&
8JRWDYOMDQMHYHOLNRVWLGHOFHYOLJQRFHOXOR]QHJDPDWHULDOD
Composites made from cellulose based materials and thermoplastics (usually called
wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of
particle size of lignocellosic material
Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (üblicherweise
Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) -
Bestimmung der Partikelgröße von lignocellulosehaltigem Material
Composites à base de matières cellulosiques et de thermoplastiques (communément
appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle
(NFC)) - Détermination des dimensions de particles de matières ligocellulosiques
Ta slovenski standard je istoveten z: CEN/TS 17158:2018
ICS:
79.080 Polizdelki iz lesa Semi-manufactures of timber
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST-TS CEN/TS 17158:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17158:2018
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17158:2018
CEN/TS 17158
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
April 2018
TECHNISCHE SPEZIFIKATION
ICS 79.080; 83.080.01; 83.140.99
English Version
Composites made from cellulose based materials and
thermoplastics (usually called wood polymer composites
(WPC) or natural fibre composites (NFC)) - Determination
of particle size of lignocellosic material
Composites à base de matières cellulosiques et de Verbundwerkstoffe aus cellulosehaltigen Materialien
thermoplastiques (communément appelés composites und Thermoplasten (üblicherweise Holz-Polymer-
bois-polymères (WPC) ou composites fibres d'origine Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe
naturelle (NFC)) - Détermination des dimensions de (NFC) genannt) - Bestimmung der Partikelgröße von
particles de matières ligocellulosiques lignocellulosehaltigem Material
This Technical Specification (CEN/TS) was approved by CEN on 10 December 2017 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17158:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17158:2018
CEN/TS 17158:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Principle . 5
4 Apparatus . 5
4.1 Vibrating sieve analysis .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.