91.100.23 - Ceramic tiles

This document applies to all bonded sheet waterproofing membranes that are used beneath ceramic tiling for internal and external tile installations on walls and floors. This document provides the terminology concerning the products and specifies the test methods and the values of performance requirements for bonded sheet waterproofing products associated with tile adhesives. Furthermore, this document specifies the evaluation of conformity and the classification and designation of all bonded she...view more

This document specifies a test method for determining the modulus of rupture and breaking strength
of all ceramic tiles.
NOTE ISO 13006 provides property requirements for tiles and other useful information on these products.

This European Standard defines Product Category Rules (PCR) providing guidelines and rules for developing a type III EPD for ceramic tiles produced by extrusion and dry-pressing techniques, mainly used for internal and/or external floorings and walls coverings and façade cladding.
These PCR specify the calculation rules in accordance with EN 15804 for the Life Cycle Assessment (LCA) of ceramic tiles for developing an EPD, as well as the requirements on the background of the LCA.
These PCR:
-   ...view more

This document specifies a test method for determining the modulus of rupture and breaking strength of all ceramic tiles.
NOTE ISO 13006 provides property requirements for tiles and other useful information on these products.

This document defines Product Category Rules (PCR) providing guidelines and rules for developing a type III environmental declaration (EPD) for ceramic tiles produced by extrusion and dry-pressing techniques, mainly used for internal and/or external floorings and walls coverings and façade cladding.
These PCR specify the calculation rules in accordance with EN 15804:2012+A1:2013 for the Life Cycle Assessment (LCA) of ceramic tiles for developing an EPD, as well as the requirements on the backgr...view more

This document specifies a test method for determining the modulus of rupture and breaking strength of all ceramic tiles. NOTE ISO 13006 provides property requirements for tiles and other useful information on these products.

This document specifies methods for determining the dimensional characteristics (length, width,
thickness, straightness of sides, rectangularity, surface flatness) and the surface quality of ceramic tiles.
Tiles with areas less than 4 cm2 are excluded from measurements of length, width, straightness of
sides, rectangularity and surface flatness.
NOTE Spacer lugs and glaze blobs and other irregularities of the sides are intended to be ignored when
measuring length, width, straightness of sid...view more

This document specifies methods for determining the dimensional characteristics (length, width, thickness, straightness of sides, rectangularity, surface flatness) and the surface quality of ceramic tiles.
Tiles with areas less than 4 cm2 are excluded from measurements of length, width, straightness of sides, rectangularity and surface flatness.
NOTE Spacer lugs and glaze blobs and other irregularities of the sides are intended to be ignored when measuring length, width, straightness of sides,...view more

This document specifies methods for determining the dimensional characteristics (length, width, thickness, straightness of sides, rectangularity, surface flatness) and the surface quality of ceramic tiles. Tiles with areas less than 4 cm2 are excluded from measurements of length, width, straightness of sides, rectangularity and surface flatness. NOTE Spacer lugs and glaze blobs and other irregularities of the sides are intended to be ignored when measuring length, width, straightness of sides, r...view more

This document defines terms and establishes classifications, characteristics and marking requirements for ceramic tiles of the best commercial quality (first quality). This document is not applicable to tiles made by other than normal processes of extrusion or dry pressing. It is not applicable to decorative accessories or trim such as edges, corners, skirting, capping, coves, beads, steps, curved tiles and other accessory pieces or mosaics (i.e. any piece that can fit into a square, the side of...view more

This document specifies a method for determining water absorption, apparent porosity, apparent
relative density and bulk density of ceramic tiles. This method is applicable to classification of tiles and
product specifications.

ISO 10545-3:2018 specifies a method for determining water absorption, apparent porosity, apparent relative density and bulk density of ceramic tiles. This method is applicable to classification of tiles and product specifications.

ISO 10545-3:2018 specifies a method for determining water absorption, apparent porosity, apparent relative density and bulk density of ceramic tiles. This method is applicable to classification of tiles and product specifications.

This European Standard is applicable to ceramic tile cementitious adhesives, dispersion adhesives and reaction resin adhesives for internal and external tile installations on walls and floors.
This standard gives the terminology concerning the products, working methods, application properties, etc, for ceramic tile adhesives.
This European Standard specifies the values of performance requirements for ceramic tile adhesives (cementitious, dispersion and reaction resin adhesives).
This European St...view more

This European Standard applies to all liquid-applied water impermeable products, based on polymer modified cementitious mortars, dispersions and reaction resin coatings, used beneath ceramic tiling, for external tile installations on walls and floors and in swimming pools.
This European Standard gives the terminology concerning the products and specifies the test methods and the values of performance requirements for liquid-applied water impermeable products associated with tile adhesives.
This ...view more

This part of EN 12004 describes methods for determining characteristics for adhesives used in the installation of ceramic tiles. The following test methods are described: Determination of slip, Concrete slabs for tests, Determination of shear adhesion strength of dispersion adhesives, Determination of open time, Determination of tensile adhesion strength of cementitious adhesives, Determination of transverse deformation, Determination of shear adhesion strength of reaction resin adhesives.

This European Standard applies to all liquid-applied water impermeable products, based on polymer modified cementitious mortars, dispersions and reaction resin coatings, used beneath ceramic tiling, for external tile installations on walls and floors and in swimming pools.
This European Standard gives the terminology concerning the products and specifies the test methods and the values of performance requirements for liquid-applied water impermeable products associated with tile adhesives.
This ...view more

This document specifies a test method for determining the chemical resistance of ceramic tiles at room
temperature. The method is applicable to all types of ceramic tiles.

ISO 10545-13:2016 specifies a test method for determining the chemical resistance of ceramic tiles at room temperature. The method is applicable to all types of ceramic tiles.

ISO 10545-13:2016 specifies a test method for determining the chemical resistance of ceramic tiles at room temperature. The method is applicable to all types of ceramic tiles.