EN ISO 10545-13:2016
(Main)Ceramic tiles - Part 13: Determination of chemical resistance (ISO 10545-13:2016)
Ceramic tiles - Part 13: Determination of chemical resistance (ISO 10545-13:2016)
ISO 10545-13:2016 specifies a test method for determining the chemical resistance of ceramic tiles at room temperature. The method is applicable to all types of ceramic tiles.
Keramische Fliesen und Platten - Teil 13: Bestimmung der chemischen Beständigkeit (ISO 10545-13:2016)
Dieser Teil von ISO 10545 legt ein Prüfverfahren zur Bestimmung der chemischen Beständigkeit keramischer Fliesen und Platten bei Raumtemperatur fest. Das Verfahren gilt für sämtliche Arten keramischer Fliesen und Platten.
Carreaux et dalles céramiques - Partie 13: Détermination de la résistance chimique (ISO 10545-13:2016)
ISO 10545-13:2016 spécifie une méthode d'essai pour la détermination de la résistance aux attaques chimiques des carreaux céramiques à la température ambiante. Cette méthode est applicable à tous les types de carreaux céramiques.
Keramične ploščice - 13. del: Ugotavljanje odpornosti proti kemikalijam (ISO 10545-13:2016)
Ta dokument določa preskusno metodo za ugotavljanje odpornosti proti kemikalijam keramičnih ploščic pri sobni temperaturi. Ta metoda se uporablja se za vse vrste keramičnih ploščic.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2017
1DGRPHãþD
SIST EN ISO 10545-13:1998
.HUDPLþQHSORãþLFHGHO 8JRWDYOMDQMHRGSRUQRVWLSURWLNHPLNDOLMDP ,62
Ceramic tiles - Part 13: Determination of chemical resistance (ISO 10545-13:2016)
Keramische Fliesen und Platten - Teil 13: Bestimmung der chemischen Beständigkeit
(ISO 10545-13:2016)
Carreaux et dalles céramiques - Partie 13: Détermination de la résistance chimique (ISO
10545-13:2016)
Ta slovenski standard je istoveten z: EN ISO 10545-13:2016
ICS:
91.100.23 .HUDPLþQHSORãþLFH Ceramic tiles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 10545-13
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2016
EUROPÄISCHE NORM
ICS 91.100.23 Supersedes EN ISO 10545-13:1997
English Version
Ceramic tiles - Part 13: Determination of chemical
resistance (ISO 10545-13:2016)
Carreaux et dalles céramiques - Partie 13: Keramische Fliesen und Platten - Teil 13: Bestimmung
Détermination de la résistance chimique (ISO 10545- der chemischen Beständigkeit (ISO 10545-13:2016)
13:2016)
This European Standard was approved by CEN on 28 October 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10545-13:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 10545-13:2016) has been prepared by Technical Committee ISO/TC 189
"Ceramic tile" in collaboration with Technical Committee CEN/TC 67 “Ceramic tiles” the secretariat of
which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be
withdrawn at the latest by June 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 10545-13:1997.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10545-13:2016 has been approved by CEN as EN ISO 10545-13:2016 without any
modification.
INTERNATIONAL ISO
STANDARD 10545-13
Second edition
2016-11-15
Ceramic tiles —
Part 13:
Determination of chemical resistance
Carreaux et dalles céramiques —
Partie 13: Détermination de la résistance chimique
Reference number
ISO 10545-13:2016(E)
©
ISO 2016
ISO 10545-13:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
ISO 10545-13:2016(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Aqueous test solutions . 1
5.1 Household chemicals . 1
5.2 Swimming pool salts . 1
5.3 Acids and alkalis . 1
5.3.1 Low concentrations (L) . 1
5.3.2 High concentrations (H) . 2
6 Apparatus . 2
7 Test specimens. 2
7.1 Number of test specimens . 2
7.2 Size of test specimens . 3
7.3 Preparation of test specimens . 3
8 Procedure. 3
8.1 Application of test solutions . 3
8.2 Determination of class . 4
8.2.1 General. 4
8.2.2 Normal classification . . 4
8.2.3 Alternative visual classification . 4
9 Test report . 5
Bibliography . 9
ISO 10545-13:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
The committee responsible for this document is ISO/TC 189, Ceramic tile.
This second edition cancels and replaces the first edition (ISO 10545-13:1995), which has been
technically revised.
A list of all parts in the ISO 10545 series can be found on the ISO website.
iv © ISO 2016 – All rights reserved
INTERNATIONAL STANDARD ISO 10545-13:2016(E)
Ceramic tiles —
Part 13:
Determination of chemical resistance
1 Scope
This document specifies a test method for determining the chemical resistance of ceramic tiles at room
temperature. The method is applicable to all types of ceramic tiles.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 3585, Borosilicate glass 3.3 — Properties
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
4 Principle
Subjection of the test specimens to the action of the test solutions and visual determination of attack
after a defined period.
5 Aqueous test solutions
5.1 Household chemicals
Ammonium chloride solution, 100 g/l.
5.2 Swimming pool salts
Sodium hypochlorite solution, 20 mg/l, prepared from technical grade sodium hypochlorite solution
5 % (W/V).
5.3 Acids and alkalis
5.3.1 Low concentrations (L)
a) Hydrochloric acid solution, 3 % (V/V), prepared from concentrated hydrochloric acid (ρ = 1,19 g/ml).
b) Citric acid solution, 100 g/l.
ISO 10545-13:2016(E)
c) Potassium hydroxide solution, 30 g/l.
5.3.2 High concentra
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.