Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018)

ISO 10545-3:2018 specifies a method for determining water absorption, apparent porosity, apparent relative density and bulk density of ceramic tiles. This method is applicable to classification of tiles and product specifications.

Keramische Fliesen und Platten - Teil 3: Bestimmung von Wasseraufnahme, offener Porosität, scheinbarer relativer Dichte und Rohdichte (ISO 10545-3:2018)

Dieser Teil von ISO 10545 legt ein Verfahren zur Bestimmung der Wasseraufnahme, der offenen Porosität, der scheinbaren relativen Dichte und der Rohdichte von keramischen Fliesen und Platten fest. Das Verfahren ist zur Klassifizierung von Fliesen und Platten und für Produktspezifikationen anzuwenden.

Carreaux et dalles céramiques - Partie 3: Détermination de l'absorption d'eau, de la porosité ouverte, de la densité relative apparente et de la masse volumique globale (ISO 10545-3:2018)

ISO 10545-3:2018 spécifié une méthode pour la détermination de l'absorption d'eau, la porosité ouverte, la densité relative apparente et la masse volumique globale des carreaux et dalles céramiques. Cette méthode est applicable pour la classification des carreaux et les caractéristiques des produits.

Keramične ploščice - 3. del: Ugotavljanje vpijanja vode, navidezne poroznosti, navidezne relativne gostote in prostorninske mase (ISO 10545-3:2018)

Ta dokument opisuje metodo določanja vpijanja vode, navidezne poroznosti, navidezne relativne gostote in prostorninske mase keramičnih ploščic. Ta metoda se uporablja za klasifikacijo ploščic in specifikacije izdelkov.

General Information

Status
Published
Publication Date
20-Mar-2018
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
21-Mar-2018
Completion Date
21-Mar-2018

RELATIONS

Buy Standard

Standard
EN ISO 10545-3:2018
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 10545-3:2018
01-maj-2018
1DGRPHãþD
SIST EN ISO 10545-3:1998
.HUDPLþQHSORãþLFHGHO8JRWDYOMDQMHYSLMDQMDYRGHQDYLGH]QHSRUR]QRVWL
QDYLGH]QHUHODWLYQHJRVWRWHLQSURVWRUQLQVNHPDVH ,62

Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent

relative density and bulk density (ISO 10545-3:2018)
Keramische Fliesen und Platten - Teil 3: Bestimmung von Wasseraufnahme, offener
Porosität, scheinbarer relativer Dichte und Rohdichte (ISO 10545-3:2018)

Carreaux et dalles céramiques - Partie 3: Détermination de l'absorption d'eau, de la

porosité ouverte, de la densité relative apparente et de la masse volumique globale (ISO

10545-3:2018)
Ta slovenski standard je istoveten z: EN ISO 10545-3:2018
ICS:
91.100.23 .HUDPLþQHSORãþLFH Ceramic tiles
SIST EN ISO 10545-3:2018 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10545-3:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 10545-3:2018
EN ISO 10545-3
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2018
EUROPÄISCHE NORM
ICS 91.100.23 Supersedes EN ISO 10545-3:1997
English Version
Ceramic tiles - Part 3: Determination of water absorption,
apparent porosity, apparent relative density and bulk
density (ISO 10545-3:2018)

Carreaux et dalles céramiques - Partie 3: Keramische Fliesen und Platten - Teil 3: Bestimmung

Détermination de l'absorption d'eau, de la porosité von Wasseraufnahme, offener Porosität, scheinbarer

ouverte, de la densité relative apparente et de la masse relativer Dichte und Rohdichte (ISO 10545-3:2018)

volumique globale (ISO 10545-3:2018)
This European Standard was approved by CEN on 22 January 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10545-3:2018 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10545-3:2018
EN ISO 10545-3:2018 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 10545-3:2018
EN ISO 10545-3:2018 (E)
European foreword

This document (EN ISO 10545-3:2018) has been prepared by Technical Committee ISO/TC 189

"Ceramic tile" in collaboration with Technical Committee CEN/TC 67 “Ceramic tiles” the secretariat of

which is held by UNI.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by September 2018, and conflicting national standards

shall be withdrawn at the latest by September 2018.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 10545-3:1997.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Serbia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
Endorsement notice

The text of ISO 10545-3:2018 has been approved by CEN as EN ISO 10545-3:2018 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 10545-3:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 10545-3:2018
INTERNATIONAL ISO
STANDARD 10545-3
Second edition
2018-02
Ceramic tiles —
Part 3:
Determination of water absorption,
apparent porosity, apparent relative
density and bulk density
Carreaux et dalles céramiques —
Partie 3: Détermination de l'absorption d'eau, de la porosité ouverte,
de la densité relative apparente et de la masse volumique globale
Reference number
ISO 10545-3:2018(E)
ISO 2018
---------------------- Page: 7 ----------------------
SIST EN ISO 10545-3:2018
ISO 10545-3:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10545-3:2018
ISO 10545-3:2018(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Principle ........................................................................................................................................................................................................................ 1

5 Apparatus ..................................................................................................................................................................................................................... 1

6 Test specimens........................................................................................................................................................................................................ 2

6.1 Sampling ....................................................................................................................................................................................................... 2

6.2 Sample cutting ......................................................................................................................................................................................... 3

6.2.1 General...................................................................................................................................................................................... 3

2 3

6.2.2 Tiles less than or equal to 400 cm ...................................................................................................................

2 2
6.2.3 Tiles greater than 400 cm and less than or equal to 3 600 cm , where x

and y >20 cm ....................................................................................................................................................................... 4

2 2
6.2.4 Tiles greater than 400 cm and less than or equal to 3 600 cm , where

only y is ≤20 cm ................................................................................................................................................................ 5

2 5

6.2.5 Tiles greater than 3 600 cm ..................................................................................................................................

7 Procedure..................................................................................................................................................................................................................... 6

7.1 Sample preparation ............................................................................................................................................................................ 6

7.2 Impregnation with water ............................................................................................................................................................... 7

7.3 Suspended weight ................................................................................................................................................................................ 7

8 Expression of results ........................................................................................................................................................................................ 7

8.1 Water absorption .................................................................................................................................................................................. 7

8.2 Apparent porosity ................................................................................................................................................................................ 8

8.3 Apparent relative density .............................................................................................................................................................. 8

8.4 Bulk density ............................................................................................................................................................................................... 8

9 Test report ................................................................................................................................................................................................................... 8

© ISO 2018 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 10545-3:2018
ISO 10545-3:2018(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following

URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 189, Ceramic tiles.

This second edition cancels and replaces the first edition (ISO 10545-3:1995 which has been technically

revised. It also incorporates ISO 10545-3:1995/Cor.1:1997.
The main changes compared to the previous edition are as follows:
— The impregnation of the samples is now only done by vacuum.
— The boiling method for impregnation of the samples has been removed.
— Sampling guidelines according to the dimension of tiles are provided.
A list of all parts in the ISO 10545 series can be found on the ISO website.
iv © ISO 2018 – All ri
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.